path: root/maca-driver-aarch64.spec

%global driver_version 3.7.0.23
%global kmod_version 3.8.23
%global source_file metax-driver-%{driver_version}-rpm-aarch64.run
%global source_url https://repo.oepkgs.net/openEuler/rpm/openEuler-24.03-LTS-SP3/contrib/drivers/aarch64/Packages/%{source_file}
%global payload_dir metax-driver-%{driver_version}
%global driver_root /opt/mxdriver
%global debug_package %{nil}
%global _buildshell /bin/bash
# Preserve the upstream prebuilt kernel modules and userspace binaries.
%global __strip /bin/true
%global __brp_strip %{nil}
%global __brp_strip_comment_note %{nil}
%global __brp_strip_static_archive %{nil}
%global __arch_install_post %{nil}

Name:           maca-driver-aarch64
Version:        %{driver_version}
Release:        1%{?dist}
Summary:        Repacked MetaX MACA DKMS driver %{driver_version} aarch64 bundle
License:        MetaX License
URL:            https://www.metax-tech.com/
ExclusiveArch:  aarch64
BuildRequires:  bash
BuildRequires:  cpio
BuildRequires:  coreutils
BuildRequires:  gzip
BuildRequires:  rpm
BuildRequires:  tar
BuildRequires:  wget
BuildRequires:  xz
AutoReqProv:    no

# Only the DKMS driver mode is packaged. Firmware and userspace management
# components required by that mode are retained.
Requires:       metax-driver = %{version}-%{release}

%description
This is a bundle package for the repacked MetaX MACA driver %{driver_version}
aarch64 payload. The build downloads the upstream Makeself installer without
executing it, then repacks the DKMS driver sources and their required firmware
and userspace payloads as separate RPM subpackages.

%package -n metax-driver
Summary:        MetaX driver DKMS-mode meta package
Requires:       metax-linux-dkms = %{version}-%{release}
Requires:       mxfw = %{version}-%{release}
Requires:       mxsmt = %{version}-%{release}
AutoReqProv:    no
%description -n metax-driver
Meta package and version marker for the DKMS MetaX driver installation.

%package -n mxfw
Summary:        MetaX GPU firmware
AutoReqProv:    no
%description -n mxfw
Repacked firmware binaries for supported MetaX GPUs.

%package -n mxsmt
Summary:        MetaX system management toolset
Requires:       bash
AutoReqProv:    no
%description -n mxsmt
Repacked MetaX system management library and mx-smi command-line tool.

%package -n metax-linux-dkms
Summary:        MetaX Linux driver DKMS source
Requires:       autoconf
Requires:       automake
Requires:       bash
Requires:       dkms >= 1.95
Requires:       elfutils-libelf-devel
AutoReqProv:    no
%description -n metax-linux-dkms
Kernel module sources for MetaX Linux driver %{kmod_version}, packaged for
DKMS-managed builds.

%package -n metax-rdma-dkms
Summary:        MetaX RDMA driver DKMS source
Requires:       automake
Requires:       bash
Requires:       dkms >= 1.95
Requires:       elfutils-libelf-devel
Requires:       metax-linux-dkms = %{version}-%{release}
AutoReqProv:    no
%description -n metax-rdma-dkms
Kernel module sources for MetaX RDMA driver %{kmod_version}, packaged for
DKMS-managed builds.

%package -n mxgvm-dkms
Summary:        MetaX GPU virtualization driver DKMS source
Requires:       autoconf
Requires:       automake
Requires:       bash
Requires:       dkms >= 1.95
Requires:       elfutils-libelf-devel
AutoReqProv:    no
%description -n mxgvm-dkms
Kernel module sources for MetaX GPU virtualization driver %{kmod_version},
packaged for DKMS-managed builds.

%prep
rm -rf %{payload_dir} %{source_file}

%build
set -euo pipefail
cd %{_builddir}

wget --tries=0 \
    --retry-connrefused \
    --waitretry=30 \
    --timeout=30 \
    --read-timeout=30 \
    --continue \
    -O "%{source_file}" \
    "%{source_url}"

rm -rf %{payload_dir}
sh "%{source_file}" --noexec --noprogress --target "%{payload_dir}"
cd %{payload_dir}

cat > .rpm-package-map <<'EOF'
rpm/metax-driver-3.7.0.23-1.aarch64.rpm metax-driver
rpm/mxfw_3.7.0-1.noarch.rpm mxfw
rpm/mxsmt_3.7.0-1.aarch64.rpm mxsmt
dkms_rpm/metax-linux-dkms-3.8.23-1.aarch64.rpm metax-linux-dkms
dkms_rpm/metax-rdma-dkms-3.8.23-1.aarch64.rpm metax-rdma-dkms
dkms_rpm/mxgvm-dkms-3.8.23-1.aarch64.rpm mxgvm-dkms
EOF

%install
set -euo pipefail
cd %{_builddir}/%{payload_dir}
rm -rf %{buildroot}
mkdir -p %{buildroot}
mkdir -p .filelists

mkdir -p %{buildroot}%{_docdir}/%{name}
cat > %{buildroot}%{_docdir}/%{name}/README <<'EOF'
This package is a repackaged MetaX MACA driver aarch64 bundle. The main bundle
installs the kernel driver exclusively through DKMS. The prebuilt kernel
module, non-DKMS RDMA/GVM, and hypervisor RPM payloads are not repackaged.
The upstream Makeself installer is only extracted and is never executed.
EOF

while read -r rpm_relpath pkg; do
    rpm_path="$(pwd)/${rpm_relpath}"
    filelist=".filelists/${pkg}.files"
    payload_list=".filelists/${pkg}.payload"

    if [ ! -f "${rpm_path}" ]; then
        echo "missing RPM: ${rpm_path}" >&2
        exit 1
    fi

    echo "==> installing rpm payload for ${pkg}: ${rpm_relpath}"
    rpm2cpio "${rpm_path}" \
        | cpio -t --quiet \
        | awk '
            $0 == "" || $0 == "." || $0 == "./" || $0 == "/" { next }
            {
                gsub(/^\.\//, "", $0)
                gsub(/^\//, "", $0)
                sub(/\/$/, "", $0)
                if ($0 != "") print "/" $0
            }
        ' \
        | sort -u > "${payload_list}"

    if [ ! -s "${payload_list}" ]; then
        echo "empty payload list for ${pkg}" >&2
        rm -f -- "${payload_list}"
        exit 1
    fi

    rpm -qpl --dump "${rpm_path}" \
        | awk '
            FNR == NR {
                payload[$0] = 1
                next
            }

            NF < 11 { next }
            {
                mode = $(NF - 6)
                path = $1
                for (i = 2; i <= NF - 10; i++) {
                    path = path " " $i
                }

                gsub(/^\.\//, "", path)
                gsub(/^\//, "", path)
                sub(/\/$/, "", path)
                if (path == "") next
                path = "/" path
                if (!(path in payload)) next
                if (mode ~ /^04/) {
                    print "%%dir " path
                } else {
                    print path
                }
            }
        ' "${payload_list}" - \
        | sort -u > "${filelist}"

    if [ ! -s "${filelist}" ]; then
        echo "empty file list for ${pkg}" >&2
        rm -f -- "${payload_list}"
        exit 1
    fi

    rm -f -- "${payload_list}"
    rpm2cpio "${rpm_path}" | (cd %{buildroot} && cpio -idmu --quiet)
done < .rpm-package-map

# Scriptlets below are adapted from the retained upstream RPMs. Runtime paths
# are used directly because RPM_BUILD_ROOT is not meaningful at install.

%postun -n mxfw -p /bin/sh
rm -rf /lib/firmware/metax

%post -n mxsmt -p /bin/sh
ln -sfn %{driver_root}/bin/mx-smi /usr/bin/mx-smi
ln -sfn %{driver_root}/share/mxsmi/mx-smi.1.gz /usr/share/man/man1/mx-smi.1.gz
echo %{driver_root}/lib > /etc/ld.so.conf.d/mxsml.conf
ldconfig

%preun -n mxsmt -p /bin/sh
if [ $1 -eq 0 ]; then
    if [[ "$(readlink -f /usr/bin/mx-smi)" = "%{driver_root}"* ]]; then
        rm -f /usr/bin/mx-smi
        rm -f /usr/share/man/man1/mx-smi.1.gz
        rm -f /etc/ld.so.conf.d/mxsml.conf
    fi
fi

%pre -n metax-linux-dkms -p /bin/sh
if [ -n "$(lsinitrd | grep metax-linux.ko)" ]; then
    echo "remove old metax-linux.ko from initramfs"
    dracut -f --omit-drivers metax-linux || true
fi

%post -n metax-linux-dkms -p /bin/sh
mkdir -p /etc/dracut.conf.d/
cat <<'EOF' > /etc/dracut.conf.d/omit-metax-linux.conf
omit_drivers+=" metax-linux "
EOF
for POSTINST in /usr/lib/dkms/common.postinst /usr/share/metax-linux/postinst; do
    if [ -f $POSTINST ]; then
        $POSTINST metax-linux %{kmod_version} /usr/share/metax-linux
        exit $?
    fi
    echo "WARNING: $POSTINST does not exist."
done
echo -e "ERROR: DKMS version is too old and metax-linux was not"
echo -e "built with legacy DKMS support."
echo -e "You must either rebuild metax-linux with legacy postinst"
echo -e "support or upgrade DKMS to a more current version."
exit 1

%preun -n metax-linux-dkms -p /bin/sh
echo -e
echo -e "Uninstall of metax-linux module (version %{kmod_version}) beginning:"
rm -f /etc/dracut.conf.d/*metax-linux*
for kernel_dir in /lib/modules/*; do
    if [ -f "$kernel_dir/extra/Module.symvers" ]; then
        rm -f "$kernel_dir/extra/Module.symvers"
    fi
done
dkms remove -m metax-linux -v %{kmod_version} --all --rpm_safe_upgrade
exit 0

%pre -n metax-rdma-dkms -p /bin/sh
if [ -n "$(lsinitrd | grep metax-rdma.ko)" ]; then
    echo "remove old metax-rdma.ko from initramfs"
    dracut -f --omit-drivers metax-rdma || true
fi

%post -n metax-rdma-dkms -p /bin/sh
mkdir -p /etc/dracut.conf.d/
cat <<'EOF' > /etc/dracut.conf.d/omit-metax-rdma.conf
omit_drivers+=" metax-rdma "
EOF
for POSTINST in /usr/lib/dkms/common.postinst /usr/share/metax-rdma/postinst; do
    if [ -f $POSTINST ]; then
        $POSTINST metax-rdma %{kmod_version} /usr/share/metax-rdma
        exit $?
    fi
    echo "WARNING: $POSTINST does not exist."
done
echo -e "ERROR: DKMS version is too old and metax-rdma was not"
echo -e "built with legacy DKMS support."
echo -e "You must either rebuild metax-rdma with legacy postinst"
echo -e "support or upgrade DKMS to a more current version."
exit 1

%preun -n metax-rdma-dkms -p /bin/sh
echo -e
echo -e "Uninstall of metax-rdma module (version %{kmod_version}) beginning:"
rm -f /etc/dracut.conf.d/*metax-rdma*
dkms remove -m metax-rdma -v %{kmod_version} --all --rpm_safe_upgrade
exit 0

%pre -n mxgvm-dkms -p /bin/sh
if [ -n "$(lsinitrd | grep mxgvm.ko)" ]; then
    echo "remove old mxgvm.ko from initramfs"
    dracut -f --omit-drivers mxgvm || true
fi

%post -n mxgvm-dkms -p /bin/sh
mkdir -p /etc/dracut.conf.d/
cat <<'EOF' > /etc/dracut.conf.d/omit-mxgvm.conf
omit_drivers+=" mxgvm "
EOF
for POSTINST in /usr/lib/dkms/common.postinst /usr/share/mxgvm/postinst; do
    if [ -f $POSTINST ]; then
        $POSTINST mxgvm %{kmod_version} /usr/share/mxgvm
        exit $?
    fi
    echo "WARNING: $POSTINST does not exist."
done
echo -e "ERROR: DKMS version is too old and mxgvm was not"
echo -e "built with legacy DKMS support."
echo -e "You must either rebuild mxgvm with legacy postinst"
echo -e "support or upgrade DKMS to a more current version."
exit 1

%preun -n mxgvm-dkms -p /bin/sh
echo -e
echo -e "Uninstall of mxgvm module (version %{kmod_version}) beginning:"
rm -f /etc/dracut.conf.d/*mxgvm*
dkms remove -m mxgvm -v %{kmod_version} --all --rpm_safe_upgrade
exit 0

%files
%{_docdir}/%{name}/README

%files -n metax-driver -f %{_builddir}/%{payload_dir}/.filelists/metax-driver.files
%files -n mxfw -f %{_builddir}/%{payload_dir}/.filelists/mxfw.files
%files -n mxsmt -f %{_builddir}/%{payload_dir}/.filelists/mxsmt.files
%files -n metax-linux-dkms -f %{_builddir}/%{payload_dir}/.filelists/metax-linux-dkms.files
%files -n metax-rdma-dkms -f %{_builddir}/%{payload_dir}/.filelists/metax-rdma-dkms.files
%files -n mxgvm-dkms -f %{_builddir}/%{payload_dir}/.filelists/mxgvm-dkms.files

%changelog
* Wed Aug 05 2026 MetaX Packager <packager@example.invalid> - 3.7.0.23-1
- Repack the MetaX MACA aarch64 driver and DKMS RPM payloads.
- Use the DKMS kernel driver for the default bundle installation.
- Omit all prebuilt kernel, non-DKMS virtualization, and hypervisor subpackages.