diff options
| -rw-r--r-- | .gitignore | 1 | ||||
| -rw-r--r-- | python-octoprint-pisupport.spec | 259 | ||||
| -rw-r--r-- | sources | 1 |
3 files changed, 261 insertions, 0 deletions
@@ -0,0 +1 @@ +/OctoPrint-PiSupport-2022.6.13.tar.gz diff --git a/python-octoprint-pisupport.spec b/python-octoprint-pisupport.spec new file mode 100644 index 0000000..381a0e9 --- /dev/null +++ b/python-octoprint-pisupport.spec @@ -0,0 +1,259 @@ +%global _empty_manifest_terminate_build 0 +Name: python-OctoPrint-PiSupport +Version: 2022.6.13 +Release: 1 +Summary: Provides additional information about your Pi in the UI +License: AGPLv3 +URL: https://github.com/OctoPrint/OctoPrint-PiSupport +Source0: https://mirrors.nju.edu.cn/pypi/web/packages/56/e1/24d7dad04870dd0aaf0b134abec7d478ded6922090e6639aebcf5e2e87bb/OctoPrint-PiSupport-2022.6.13.tar.gz +BuildArch: noarch + +Requires: python3-pytest +Requires: python3-ddt +Requires: python3-mock +Requires: python3-pre-commit + +%description +# Pi Support + +The Pi Support plugin provides additional information about your Pi in the UI and also +alerts you about undervoltage or overheating issues observed on your Pi or if your Pi is +unsupported. If you are running OctoPi, the Pi Support plugin will also provide additional +information about that. + +OctoPrint will only load this plugin when it detects that it is being run on a +Raspberry Pi. + +This plugin was bundled right with OctoPrint's sources until version 1.6.0. It has been +extracted into a standalone project to allow for a different release cycle, but is still +considered a bundled plugin. + +## Setup + +The plugin is part of the core dependencies of OctoPrint 1.6.0+ and will be installed automatically alongside it. + +In case you want to manually install it into an older version for whatever reason, install via the bundled +[Plugin Manager](https://docs.octoprint.org/en/master/bundledplugins/pluginmanager.html) +or manually using this URL: + + https://github.com/OctoPrint/OctoPrint-PiSupport/archive/main.zip + +To install and/or rollback to a specific version `<version>`, either use this URL in the plugin manager: + + https://github.com/OctoPrint/OctoPrint-PiSupport/archive/<version>.zip + +or run + + pip install OctoPrint-PiSupport==<version> + +in your OctoPrint virtual environment, substituting `<version>` accordingly. + +## Events + +### plugin_pi_support_throttle_state + +*(as `Events.PLUGIN_PI_SUPPORT_THROTTLE_STATE`)* + +A change in throttle state was detected. + +Payload: + * `raw_value`: The raw throttle state value as received from `vcgencmd get_throttled` + * `current_undervolate`: Whether there is currently an undervoltage condition + * `past_undervoltage`: Whether there has been an undervoltage condition since last boot + * `current_overheat`: Whether there is currently an overheat condition + * `past_overheat`: Whether there has been an overheat condition since last boot + * `current_issue`: Whether there is currently an undervoltage or overheat condition + * `past_issue`: Whether there has been either an undervoltage or overheat condition since last boot + +## Helpers + +### get_throttled + +Access to `get_throttle_state`, to retrieve the current throttle state. Returns a `dict` +with the same fields as the `PLUGIN_PI_SUPPORT_THROTTLE_STATE` event payload. By setting +the keyword argument `run_now` set to `True`, the throttle state will be refreshed before +returning. + + + + +%package -n python3-OctoPrint-PiSupport +Summary: Provides additional information about your Pi in the UI +Provides: python-OctoPrint-PiSupport +BuildRequires: python3-devel +BuildRequires: python3-setuptools +BuildRequires: python3-pip +%description -n python3-OctoPrint-PiSupport +# Pi Support + +The Pi Support plugin provides additional information about your Pi in the UI and also +alerts you about undervoltage or overheating issues observed on your Pi or if your Pi is +unsupported. If you are running OctoPi, the Pi Support plugin will also provide additional +information about that. + +OctoPrint will only load this plugin when it detects that it is being run on a +Raspberry Pi. + +This plugin was bundled right with OctoPrint's sources until version 1.6.0. It has been +extracted into a standalone project to allow for a different release cycle, but is still +considered a bundled plugin. + +## Setup + +The plugin is part of the core dependencies of OctoPrint 1.6.0+ and will be installed automatically alongside it. + +In case you want to manually install it into an older version for whatever reason, install via the bundled +[Plugin Manager](https://docs.octoprint.org/en/master/bundledplugins/pluginmanager.html) +or manually using this URL: + + https://github.com/OctoPrint/OctoPrint-PiSupport/archive/main.zip + +To install and/or rollback to a specific version `<version>`, either use this URL in the plugin manager: + + https://github.com/OctoPrint/OctoPrint-PiSupport/archive/<version>.zip + +or run + + pip install OctoPrint-PiSupport==<version> + +in your OctoPrint virtual environment, substituting `<version>` accordingly. + +## Events + +### plugin_pi_support_throttle_state + +*(as `Events.PLUGIN_PI_SUPPORT_THROTTLE_STATE`)* + +A change in throttle state was detected. + +Payload: + * `raw_value`: The raw throttle state value as received from `vcgencmd get_throttled` + * `current_undervolate`: Whether there is currently an undervoltage condition + * `past_undervoltage`: Whether there has been an undervoltage condition since last boot + * `current_overheat`: Whether there is currently an overheat condition + * `past_overheat`: Whether there has been an overheat condition since last boot + * `current_issue`: Whether there is currently an undervoltage or overheat condition + * `past_issue`: Whether there has been either an undervoltage or overheat condition since last boot + +## Helpers + +### get_throttled + +Access to `get_throttle_state`, to retrieve the current throttle state. Returns a `dict` +with the same fields as the `PLUGIN_PI_SUPPORT_THROTTLE_STATE` event payload. By setting +the keyword argument `run_now` set to `True`, the throttle state will be refreshed before +returning. + + + + +%package help +Summary: Development documents and examples for OctoPrint-PiSupport +Provides: python3-OctoPrint-PiSupport-doc +%description help +# Pi Support + +The Pi Support plugin provides additional information about your Pi in the UI and also +alerts you about undervoltage or overheating issues observed on your Pi or if your Pi is +unsupported. If you are running OctoPi, the Pi Support plugin will also provide additional +information about that. + +OctoPrint will only load this plugin when it detects that it is being run on a +Raspberry Pi. + +This plugin was bundled right with OctoPrint's sources until version 1.6.0. It has been +extracted into a standalone project to allow for a different release cycle, but is still +considered a bundled plugin. + +## Setup + +The plugin is part of the core dependencies of OctoPrint 1.6.0+ and will be installed automatically alongside it. + +In case you want to manually install it into an older version for whatever reason, install via the bundled +[Plugin Manager](https://docs.octoprint.org/en/master/bundledplugins/pluginmanager.html) +or manually using this URL: + + https://github.com/OctoPrint/OctoPrint-PiSupport/archive/main.zip + +To install and/or rollback to a specific version `<version>`, either use this URL in the plugin manager: + + https://github.com/OctoPrint/OctoPrint-PiSupport/archive/<version>.zip + +or run + + pip install OctoPrint-PiSupport==<version> + +in your OctoPrint virtual environment, substituting `<version>` accordingly. + +## Events + +### plugin_pi_support_throttle_state + +*(as `Events.PLUGIN_PI_SUPPORT_THROTTLE_STATE`)* + +A change in throttle state was detected. + +Payload: + * `raw_value`: The raw throttle state value as received from `vcgencmd get_throttled` + * `current_undervolate`: Whether there is currently an undervoltage condition + * `past_undervoltage`: Whether there has been an undervoltage condition since last boot + * `current_overheat`: Whether there is currently an overheat condition + * `past_overheat`: Whether there has been an overheat condition since last boot + * `current_issue`: Whether there is currently an undervoltage or overheat condition + * `past_issue`: Whether there has been either an undervoltage or overheat condition since last boot + +## Helpers + +### get_throttled + +Access to `get_throttle_state`, to retrieve the current throttle state. Returns a `dict` +with the same fields as the `PLUGIN_PI_SUPPORT_THROTTLE_STATE` event payload. By setting +the keyword argument `run_now` set to `True`, the throttle state will be refreshed before +returning. + + + + +%prep +%autosetup -n OctoPrint-PiSupport-2022.6.13 + +%build +%py3_build + +%install +%py3_install +install -d -m755 %{buildroot}/%{_pkgdocdir} +if [ -d doc ]; then cp -arf doc %{buildroot}/%{_pkgdocdir}; fi +if [ -d docs ]; then cp -arf docs %{buildroot}/%{_pkgdocdir}; fi +if [ -d example ]; then cp -arf example %{buildroot}/%{_pkgdocdir}; fi +if [ -d examples ]; then cp -arf examples %{buildroot}/%{_pkgdocdir}; fi +pushd %{buildroot} +if [ -d usr/lib ]; then + find usr/lib -type f -printf "/%h/%f\n" >> filelist.lst +fi +if [ -d usr/lib64 ]; then + find usr/lib64 -type f -printf "/%h/%f\n" >> filelist.lst +fi +if [ -d usr/bin ]; then + find usr/bin -type f -printf "/%h/%f\n" >> filelist.lst +fi +if [ -d usr/sbin ]; then + find usr/sbin -type f -printf "/%h/%f\n" >> filelist.lst +fi +touch doclist.lst +if [ -d usr/share/man ]; then + find usr/share/man -type f -printf "/%h/%f.gz\n" >> doclist.lst +fi +popd +mv %{buildroot}/filelist.lst . +mv %{buildroot}/doclist.lst . + +%files -n python3-OctoPrint-PiSupport -f filelist.lst +%dir %{python3_sitelib}/* + +%files help -f doclist.lst +%{_docdir}/* + +%changelog +* Tue Apr 11 2023 Python_Bot <Python_Bot@openeuler.org> - 2022.6.13-1 +- Package Spec generated @@ -0,0 +1 @@ +a13eb12cb295a5f0759b8fbb7a6cc27f OctoPrint-PiSupport-2022.6.13.tar.gz |