automatic import of libvirtopeneuler22.03_LTS

1 files changed, 3009 insertions, 0 deletions

diff --git a/libvirt.spec b/libvirt.spec
new file mode 100644
index 0000000..c938168
--- /dev/null
+++ b/libvirt.spec
@@ -0,0 +1,3009 @@
+# -*- rpm-spec -*-
+
+# This spec file assumes you are building on a Fedora or RHEL version
+# that's still supported by the vendor. It may work on other distros
+# or versions, but no effort will be made to ensure that going forward.
+%define min_rhel 8
+%define min_fedora 33
+
+%define arches_qemu_kvm         %{ix86} x86_64 %{power64} %{arm} aarch64 s390x
+%if 0%{?rhel}
+    %if 0%{?rhel} > 8
+        %define arches_qemu_kvm     x86_64 aarch64 s390x
+    %else
+        %define arches_qemu_kvm     x86_64 %{power64} aarch64 s390x
+    %endif
+%endif
+
+%define arches_64bit            x86_64 %{power64} aarch64 s390x riscv64
+%define arches_x86              %{ix86} x86_64
+
+%define arches_systemtap_64bit  %{arches_64bit}
+%define arches_dmidecode        %{arches_x86}
+%define arches_xen              %{arches_x86} aarch64
+%define arches_vbox             %{arches_x86}
+%define arches_ceph             %{arches_64bit}
+%define arches_zfs              %{arches_x86} %{power64} %{arm}
+%define arches_numactl          %{arches_x86} %{power64} aarch64 s390x
+%define arches_numad            %{arches_x86} %{power64} aarch64
+
+# The hypervisor drivers that run in libvirtd
+%define with_qemu          0%{!?_without_qemu:1}
+%define with_lxc           0%{!?_without_lxc:1}
+%define with_libxl         0%{!?_without_libxl:1}
+%define with_vbox          0%{!?_without_vbox:1}
+
+%ifarch %{arches_qemu_kvm}
+    %define with_qemu_kvm      %{with_qemu}
+%else
+    %define with_qemu_kvm      0
+%endif
+
+%define with_qemu_tcg      %{with_qemu}
+
+# RHEL disables TCG on all architectures
+%if 0%{?rhel}
+    %define with_qemu_tcg 0
+%endif
+
+%if ! %{with_qemu_tcg} && ! %{with_qemu_kvm}
+    %define with_qemu 0
+%endif
+
+# Then the hypervisor drivers that run outside libvirtd, in libvirt.so
+%define with_openvz        0%{!?_without_openvz:1}
+%define with_vmware        0%{!?_without_vmware:1}
+%define with_esx           0%{!?_without_esx:1}
+%define with_hyperv        0%{!?_without_hyperv:1}
+
+# Then the secondary host drivers, which run inside libvirtd
+%define with_storage_rbd      0%{!?_without_storage_rbd:1}
+%if 0%{?fedora}
+    %define with_storage_sheepdog 0%{!?_without_storage_sheepdog:1}
+%else
+    %define with_storage_sheepdog 0
+%endif
+
+%define with_storage_gluster 0%{!?_without_storage_gluster:1}
+%if 0%{?rhel}
+    # Glusterfs has been dropped in RHEL-9, and before that
+    # was only enabled on arches where KVM exists
+    %if 0%{?rhel} > 8
+        %define with_storage_gluster 0
+    %else
+        %ifnarch %{arches_qemu_kvm}
+            %define with_storage_gluster 0
+        %endif
+    %endif
+%endif
+
+# Fedora has zfs-fuse
+%if 0%{?fedora}
+    %define with_storage_zfs      0%{!?_without_storage_zfs:1}
+%else
+    %define with_storage_zfs      0
+%endif
+
+%define with_storage_iscsi_direct 0%{!?_without_storage_iscsi_direct:1}
+# libiscsi has been dropped in RHEL-9
+%if 0%{?rhel} > 8
+    %define with_storage_iscsi_direct 0
+%endif
+
+# Other optional features
+%define with_numactl          0%{!?_without_numactl:1}
+
+# A few optional bits off by default, we enable later
+%define with_fuse             0
+%define with_sanlock          0
+%define with_numad            0
+%define with_firewalld_zone   0
+%define with_netcf            0
+%define with_libssh2          0
+%define with_wireshark        0
+%define with_libssh           0
+%define with_dmidecode        0
+
+# Finally set the OS / architecture specific special cases
+
+# Architecture-dependent features
+%ifnarch %{arches_xen}
+    %define with_libxl 0
+%endif
+%ifnarch %{arches_vbox}
+    %define with_vbox 0
+%endif
+%ifnarch %{arches_numactl}
+    %define with_numactl 0
+%endif
+%ifnarch %{arches_zfs}
+    %define with_storage_zfs 0
+%endif
+%ifnarch %{arches_ceph}
+    %define with_storage_rbd 0
+%endif
+
+# RHEL doesn't ship many hypervisor drivers
+%if 0%{?rhel}
+    %define with_openvz 0
+    %define with_vbox 0
+    %define with_vmware 0
+    %define with_libxl 0
+    %define with_hyperv 0
+    %define with_vz 0
+    %define with_lxc 0
+%endif
+
+%define with_firewalld_zone 0%{!?_without_firewalld_zone:1}
+
+%if (0%{?fedora} && 0%{?fedora} < 34) || (0%{?rhel} && 0%{?rhel} < 9)
+    %define with_netcf 0%{!?_without_netcf:1}
+%endif
+
+
+# fuse is used to provide virtualized /proc for LXC
+%if %{with_lxc}
+    %define with_fuse      0%{!?_without_fuse:1}
+%endif
+
+# Enable sanlock library for lock management with QEMU
+# Sanlock is available only on arches where kvm is available for RHEL
+%if 0%{?fedora}
+    %define with_sanlock 0%{!?_without_sanlock:1}
+%endif
+%if 0%{?rhel}
+    %ifarch %{arches_qemu_kvm}
+        %define with_sanlock 0%{!?_without_sanlock:1}
+    %endif
+%endif
+
+# Enable libssh2 transport for new enough distros
+%if 0%{?fedora}
+    %define with_libssh2 0%{!?_without_libssh2:1}
+%endif
+
+# Enable wireshark plugins for all distros
+%define with_wireshark 0%{!?_without_wireshark:1}
+%define wireshark_plugindir %(pkg-config --variable plugindir wireshark)/epan
+
+# Enable libssh transport for all distros
+%define with_libssh 0%{!?_without_libssh:1}
+
+%if %{with_qemu} || %{with_lxc}
+# numad is used to manage the CPU and memory placement dynamically,
+# it's not available on many non-x86 architectures.
+    %ifarch %{arches_numad}
+        %define with_numad    0%{!?_without_numad:1}
+    %endif
+%endif
+
+%ifarch %{arches_dmidecode}
+    %define with_dmidecode 0%{!?_without_dmidecode:1}
+%endif
+
+%define with_modular_daemons 0
+%if 0%{?fedora} >= 35 || 0%{?rhel} >= 9
+    %define with_modular_daemons 1
+%endif
+
+# Force QEMU to run as non-root
+%define qemu_user  qemu
+%define qemu_group  qemu
+
+
+# RHEL releases provide stable tool chains and so it is safe to turn
+# compiler warning into errors without being worried about frequent
+# changes in reported warnings
+%if 0%{?rhel}
+    %define enable_werror -Dwerror=true
+%else
+    %define enable_werror -Dwerror=false -Dgit_werror=disabled
+%endif
+
+%define tls_priority "@LIBVIRT,SYSTEM"
+
+
+Summary: Library providing a simple virtualization API
+Name: libvirt
+Version: 7.9.0
+Release: 1%{?dist}%{?extra_release}
+License: LGPLv2+
+URL: https://libvirt.org/
+
+%if %(echo %{version} | grep -q "\.0$"; echo $?) == 1
+    %define mainturl stable_updates/
+%endif
+Source: https://libvirt.org/sources/%{?mainturl}libvirt-%{version}.tar.xz
+Source1: symlinks
+
+Patch1: libvirt-RHEL-Hack-around-changed-Broadwell-Haswell-CPUs.patch
+Patch2: libvirt-RHEL-Add-rhel-machine-types-to-qemuDomainMachineNeedsFDC.patch
+Patch3: libvirt-RHEL-Fix-virConnectGetMaxVcpus-output.patch
+Patch4: libvirt-RHEL-qemu-Add-ability-to-set-sgio-values-for-hostdev.patch
+Patch5: libvirt-RHEL-qemu-Add-check-for-unpriv-sgio-for-SCSI-generic-host-device.patch
+Patch6: libvirt-RHEL-virscsi-Check-device-type-before-getting-it-s-dev-node-name.patch
+Patch7: libvirt-RHEL-virscsi-Support-TAPEs-in-virSCSIDeviceGetDevName.patch
+Patch8: libvirt-RHEL-virscsi-Introduce-and-use-virSCSIDeviceGetUnprivSGIOSysfsPath.patch
+Patch9: libvirt-RHEL-virutil-Accept-non-block-devices-in-virGetDeviceID.patch
+Patch10: libvirt-RHEL-Enable-usage-of-x-blockdev-reopen.patch
+
+Requires: libvirt-daemon = %{version}-%{release}
+Requires: libvirt-daemon-config-network = %{version}-%{release}
+Requires: libvirt-daemon-config-nwfilter = %{version}-%{release}
+%if %{with_libxl}
+Requires: libvirt-daemon-driver-libxl = %{version}-%{release}
+%endif
+%if %{with_lxc}
+Requires: libvirt-daemon-driver-lxc = %{version}-%{release}
+%endif
+%if %{with_qemu}
+Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
+%endif
+# We had UML driver, but we've removed it.
+Obsoletes: libvirt-daemon-driver-uml <= 5.0.0
+Obsoletes: libvirt-daemon-uml <= 5.0.0
+%if %{with_vbox}
+Requires: libvirt-daemon-driver-vbox = %{version}-%{release}
+%endif
+Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
+
+Requires: libvirt-daemon-driver-interface = %{version}-%{release}
+Requires: libvirt-daemon-driver-secret = %{version}-%{release}
+Requires: libvirt-daemon-driver-storage = %{version}-%{release}
+Requires: libvirt-daemon-driver-network = %{version}-%{release}
+Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
+Requires: libvirt-client = %{version}-%{release}
+Requires: libvirt-libs = %{version}-%{release}
+
+# All build-time requirements. Run-time requirements are
+# listed against each sub-RPM
+BuildRequires: python3-docutils
+BuildRequires: gcc
+BuildRequires: meson >= 0.54.0
+BuildRequires: ninja-build
+BuildRequires: git
+BuildRequires: perl-interpreter
+%if 0%{?rhel} == 8
+BuildRequires: python3-devel
+%else
+BuildRequires: python3
+%endif
+%if %{with_libxl}
+BuildRequires: xen-devel
+%endif
+BuildRequires: glib2-devel >= 2.56
+BuildRequires: libxml2-devel
+BuildRequires: libxslt
+BuildRequires: readline-devel
+BuildRequires: bash-completion >= 2.0
+BuildRequires: gettext
+BuildRequires: libtasn1-devel
+BuildRequires: gnutls-devel
+BuildRequires: libattr-devel
+# For pool-build probing for existing pools
+BuildRequires: libblkid-devel >= 2.17
+# for augparse, optionally used in testing
+BuildRequires: augeas
+BuildRequires: systemd-devel >= 185
+BuildRequires: libpciaccess-devel >= 0.10.9
+BuildRequires: yajl-devel
+%if %{with_sanlock}
+BuildRequires: sanlock-devel >= 2.4
+%endif
+BuildRequires: libpcap-devel >= 1.5.0
+BuildRequires: libnl3-devel
+BuildRequires: libselinux-devel
+BuildRequires: dnsmasq >= 2.41
+BuildRequires: iptables
+BuildRequires: radvd
+BuildRequires: ebtables
+BuildRequires: module-init-tools
+BuildRequires: cyrus-sasl-devel
+BuildRequires: polkit >= 0.112
+# For mount/umount in FS driver
+BuildRequires: util-linux
+%if %{with_qemu}
+# For managing ACLs
+BuildRequires: libacl-devel
+# From QEMU RPMs
+BuildRequires: /usr/bin/qemu-img
+%endif
+# For LVM drivers
+BuildRequires: lvm2
+# For pool type=iscsi
+BuildRequires: iscsi-initiator-utils
+%if %{with_storage_iscsi_direct}
+# For pool type=iscsi-direct
+BuildRequires: libiscsi-devel
+%endif
+# For disk driver
+BuildRequires: parted-devel
+# For Multipath support
+BuildRequires: device-mapper-devel
+# For XFS reflink clone support
+BuildRequires: xfsprogs-devel
+%if %{with_storage_rbd}
+BuildRequires: librados-devel
+BuildRequires: librbd-devel
+%endif
+%if %{with_storage_gluster}
+BuildRequires: glusterfs-api-devel >= 3.4.1
+BuildRequires: glusterfs-devel >= 3.4.1
+%endif
+%if %{with_storage_sheepdog}
+BuildRequires: sheepdog
+%endif
+%if %{with_storage_zfs}
+# Support any conforming implementation of zfs. On stock Fedora
+# this is zfs-fuse, but could be zfsonlinux upstream RPMs
+BuildRequires: /sbin/zfs
+BuildRequires: /sbin/zpool
+%endif
+%if %{with_numactl}
+# For QEMU/LXC numa info
+BuildRequires: numactl-devel
+%endif
+BuildRequires: libcap-ng-devel >= 0.5.0
+%if %{with_fuse}
+BuildRequires: fuse-devel >= 2.8.6
+%endif
+%if %{with_libssh2}
+BuildRequires: libssh2-devel >= 1.3.0
+%endif
+%if %{with_netcf}
+BuildRequires: netcf-devel >= 0.2.2
+%endif
+%if %{with_esx}
+BuildRequires: libcurl-devel
+%endif
+%if %{with_hyperv}
+BuildRequires: libwsman-devel >= 2.6.3
+%endif
+BuildRequires: audit-libs-devel
+# we need /usr/sbin/dtrace
+BuildRequires: systemtap-sdt-devel
+
+# For mount/umount in FS driver
+BuildRequires: util-linux
+# For showmount in FS driver (netfs discovery)
+BuildRequires: nfs-utils
+
+# Fedora build root suckage
+BuildRequires: gawk
+
+# For storage wiping with different algorithms
+BuildRequires: scrub
+
+%if %{with_numad}
+BuildRequires: numad
+%endif
+
+%if %{with_wireshark}
+BuildRequires: wireshark-devel
+%endif
+
+%if %{with_libssh}
+BuildRequires: libssh-devel >= 0.7.0
+%endif
+
+BuildRequires: rpcgen
+BuildRequires: libtirpc-devel
+
+# Needed for the firewalld_reload macro
+%if %{with_firewalld_zone}
+BuildRequires: firewalld-filesystem
+%endif
+
+%description
+Libvirt is a C toolkit to interact with the virtualization capabilities
+of recent versions of Linux (and other OSes). The main package includes
+the libvirtd server exporting the virtualization support.
+
+%package docs
+Summary: API reference and website documentation
+
+%description docs
+Includes the API reference for the libvirt C library, and a complete
+copy of the libvirt.org website documentation.
+
+%package daemon
+Summary: Server side daemon and supporting files for libvirt library
+
+# All runtime requirements for the libvirt package (runtime requrements
+# for subpackages are listed later in those subpackages)
+
+# The client side, i.e. shared libs are in a subpackage
+Requires: %{name}-libs = %{version}-%{release}
+
+# (client invokes 'nc' against the UNIX socket on the server)
+Requires: /usr/bin/nc
+
+# for modprobe of pci devices
+Requires: module-init-tools
+
+# for /sbin/ip
+Requires: iproute
+# for /sbin/tc
+Requires: iproute-tc
+
+Requires: polkit >= 0.112
+%if %{with_dmidecode}
+# For virConnectGetSysinfo
+Requires: dmidecode
+%endif
+# For service management
+Requires(post): /usr/bin/systemctl
+%if %{with_numad}
+Requires: numad
+%endif
+# libvirtd depends on 'messagebus' service
+Requires: dbus
+# For uid creation during pre
+Requires(pre): shadow-utils
+# Needed by /usr/libexec/libvirt-guests.sh script.
+Requires: gettext
+
+# Ensure smooth upgrades
+Obsoletes: libvirt-admin < 7.3.0
+Provides: libvirt-admin = %{version}-%{release}
+Obsoletes: libvirt-bash-completion < 7.3.0
+
+%description daemon
+Server side daemon required to manage the virtualization capabilities
+of recent versions of Linux. Requires a hypervisor specific sub-RPM
+for specific drivers.
+
+%package daemon-config-network
+Summary: Default configuration files for the libvirtd daemon
+
+Requires: libvirt-daemon = %{version}-%{release}
+Requires: libvirt-daemon-driver-network = %{version}-%{release}
+
+%description daemon-config-network
+Default configuration files for setting up NAT based networking
+
+%package daemon-config-nwfilter
+Summary: Network filter configuration files for the libvirtd daemon
+
+Requires: libvirt-daemon = %{version}-%{release}
+Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
+
+%description daemon-config-nwfilter
+Network filter configuration files for cleaning guest traffic
+
+%package daemon-driver-network
+Summary: Network driver plugin for the libvirtd daemon
+Requires: libvirt-daemon = %{version}-%{release}
+Requires: libvirt-libs = %{version}-%{release}
+Requires: dnsmasq >= 2.41
+Requires: radvd
+Requires: iptables
+
+%description daemon-driver-network
+The network driver plugin for the libvirtd daemon, providing
+an implementation of the virtual network APIs using the Linux
+bridge capabilities.
+
+
+%package daemon-driver-nwfilter
+Summary: Nwfilter driver plugin for the libvirtd daemon
+Requires: libvirt-daemon = %{version}-%{release}
+Requires: libvirt-libs = %{version}-%{release}
+Requires: iptables
+Requires: ebtables
+
+%description daemon-driver-nwfilter
+The nwfilter driver plugin for the libvirtd daemon, providing
+an implementation of the firewall APIs using the ebtables,
+iptables and ip6tables capabilities
+
+
+%package daemon-driver-nodedev
+Summary: Nodedev driver plugin for the libvirtd daemon
+Requires: libvirt-daemon = %{version}-%{release}
+Requires: libvirt-libs = %{version}-%{release}
+# needed for device enumeration
+Requires: systemd >= 185
+# For managing persistent mediated devices
+Requires: mdevctl
+
+%description daemon-driver-nodedev
+The nodedev driver plugin for the libvirtd daemon, providing
+an implementation of the node device APIs using the udev
+capabilities.
+
+
+%package daemon-driver-interface
+Summary: Interface driver plugin for the libvirtd daemon
+Requires: libvirt-daemon = %{version}-%{release}
+Requires: libvirt-libs = %{version}-%{release}
+%if %{with_netcf}
+Requires: netcf-libs >= 0.2.2
+%endif
+
+%description daemon-driver-interface
+The interface driver plugin for the libvirtd daemon, providing
+an implementation of the host network interface APIs.
+
+%package daemon-driver-secret
+Summary: Secret driver plugin for the libvirtd daemon
+Requires: libvirt-daemon = %{version}-%{release}
+Requires: libvirt-libs = %{version}-%{release}
+
+%description daemon-driver-secret
+The secret driver plugin for the libvirtd daemon, providing
+an implementation of the secret key APIs.
+
+%package daemon-driver-storage-core
+Summary: Storage driver plugin including base backends for the libvirtd daemon
+Requires: libvirt-daemon = %{version}-%{release}
+Requires: libvirt-libs = %{version}-%{release}
+Requires: nfs-utils
+# For mkfs
+Requires: util-linux
+%if %{with_qemu}
+# From QEMU RPMs
+Requires: /usr/bin/qemu-img
+%endif
+%if !%{with_storage_rbd}
+Obsoletes: libvirt-daemon-driver-storage-rbd < %{version}-%{release}
+%endif
+
+%description daemon-driver-storage-core
+The storage driver plugin for the libvirtd daemon, providing
+an implementation of the storage APIs using files, local disks, LVM, SCSI,
+iSCSI, and multipath storage.
+
+%package daemon-driver-storage-logical
+Summary: Storage driver plugin for lvm volumes
+Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
+Requires: libvirt-libs = %{version}-%{release}
+Requires: lvm2
+
+%description daemon-driver-storage-logical
+The storage driver backend adding implementation of the storage APIs for block
+volumes using lvm.
+
+
+%package daemon-driver-storage-disk
+Summary: Storage driver plugin for disk
+Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
+Requires: libvirt-libs = %{version}-%{release}
+Requires: parted
+Requires: device-mapper
+
+%description daemon-driver-storage-disk
+The storage driver backend adding implementation of the storage APIs for block
+volumes using the host disks.
+
+
+%package daemon-driver-storage-scsi
+Summary: Storage driver plugin for local scsi devices
+Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
+Requires: libvirt-libs = %{version}-%{release}
+
+%description daemon-driver-storage-scsi
+The storage driver backend adding implementation of the storage APIs for scsi
+host devices.
+
+
+%package daemon-driver-storage-iscsi
+Summary: Storage driver plugin for iscsi
+Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
+Requires: libvirt-libs = %{version}-%{release}
+Requires: iscsi-initiator-utils
+
+%description daemon-driver-storage-iscsi
+The storage driver backend adding implementation of the storage APIs for iscsi
+volumes using the host iscsi stack.
+
+
+%if %{with_storage_iscsi_direct}
+%package daemon-driver-storage-iscsi-direct
+Summary: Storage driver plugin for iscsi-direct
+Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
+Requires: libvirt-libs = %{version}-%{release}
+
+%description daemon-driver-storage-iscsi-direct
+The storage driver backend adding implementation of the storage APIs for iscsi
+volumes using libiscsi direct connection.
+%endif
+
+
+%package daemon-driver-storage-mpath
+Summary: Storage driver plugin for multipath volumes
+Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
+Requires: libvirt-libs = %{version}-%{release}
+Requires: device-mapper
+
+%description daemon-driver-storage-mpath
+The storage driver backend adding implementation of the storage APIs for
+multipath storage using device mapper.
+
+
+%if %{with_storage_gluster}
+%package daemon-driver-storage-gluster
+Summary: Storage driver plugin for gluster
+Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
+Requires: libvirt-libs = %{version}-%{release}
+    %if 0%{?fedora}
+Requires: glusterfs-client >= 2.0.1
+    %endif
+    %if (0%{?fedora} || 0%{?with_storage_gluster})
+Requires: /usr/sbin/gluster
+    %endif
+
+%description daemon-driver-storage-gluster
+The storage driver backend adding implementation of the storage APIs for gluster
+volumes using libgfapi.
+%endif
+
+
+%if %{with_storage_rbd}
+%package daemon-driver-storage-rbd
+Summary: Storage driver plugin for rbd
+Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
+Requires: libvirt-libs = %{version}-%{release}
+
+%description daemon-driver-storage-rbd
+The storage driver backend adding implementation of the storage APIs for rbd
+volumes using the ceph protocol.
+%endif
+
+
+%if %{with_storage_sheepdog}
+%package daemon-driver-storage-sheepdog
+Summary: Storage driver plugin for sheepdog
+Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
+Requires: libvirt-libs = %{version}-%{release}
+Requires: sheepdog
+
+%description daemon-driver-storage-sheepdog
+The storage driver backend adding implementation of the storage APIs for
+sheepdog volumes using.
+%endif
+
+
+%if %{with_storage_zfs}
+%package daemon-driver-storage-zfs
+Summary: Storage driver plugin for ZFS
+Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
+Requires: libvirt-libs = %{version}-%{release}
+# Support any conforming implementation of zfs
+Requires: /sbin/zfs
+Requires: /sbin/zpool
+
+%description daemon-driver-storage-zfs
+The storage driver backend adding implementation of the storage APIs for
+ZFS volumes.
+%endif
+
+
+%package daemon-driver-storage
+Summary: Storage driver plugin including all backends for the libvirtd daemon
+Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
+Requires: libvirt-daemon-driver-storage-disk = %{version}-%{release}
+Requires: libvirt-daemon-driver-storage-logical = %{version}-%{release}
+Requires: libvirt-daemon-driver-storage-scsi = %{version}-%{release}
+Requires: libvirt-daemon-driver-storage-iscsi = %{version}-%{release}
+Requires: libvirt-daemon-driver-storage-mpath = %{version}-%{release}
+%if %{with_storage_iscsi_direct}
+Requires: libvirt-daemon-driver-storage-iscsi-direct = %{version}-%{release}
+%endif
+%if %{with_storage_gluster}
+Requires: libvirt-daemon-driver-storage-gluster = %{version}-%{release}
+%endif
+%if %{with_storage_rbd}
+Requires: libvirt-daemon-driver-storage-rbd = %{version}-%{release}
+%endif
+%if %{with_storage_sheepdog}
+Requires: libvirt-daemon-driver-storage-sheepdog = %{version}-%{release}
+%endif
+%if %{with_storage_zfs}
+Requires: libvirt-daemon-driver-storage-zfs = %{version}-%{release}
+%endif
+
+%description daemon-driver-storage
+The storage driver plugin for the libvirtd daemon, providing
+an implementation of the storage APIs using LVM, iSCSI,
+parted and more.
+
+
+%if %{with_qemu}
+%package daemon-driver-qemu
+Summary: QEMU driver plugin for the libvirtd daemon
+Requires: libvirt-daemon = %{version}-%{release}
+Requires: libvirt-libs = %{version}-%{release}
+Requires: /usr/bin/qemu-img
+# For image compression
+Requires: gzip
+Requires: bzip2
+Requires: lzop
+Requires: xz
+Requires: systemd-container
+Requires: swtpm-tools
+
+%description daemon-driver-qemu
+The qemu driver plugin for the libvirtd daemon, providing
+an implementation of the hypervisor driver APIs using
+QEMU
+%endif
+
+
+%if %{with_lxc}
+%package daemon-driver-lxc
+Summary: LXC driver plugin for the libvirtd daemon
+Requires: libvirt-daemon = %{version}-%{release}
+Requires: libvirt-libs = %{version}-%{release}
+# There really is a hard cross-driver dependency here
+Requires: libvirt-daemon-driver-network = %{version}-%{release}
+Requires: systemd-container
+
+%description daemon-driver-lxc
+The LXC driver plugin for the libvirtd daemon, providing
+an implementation of the hypervisor driver APIs using
+the Linux kernel
+%endif
+
+
+%if %{with_vbox}
+%package daemon-driver-vbox
+Summary: VirtualBox driver plugin for the libvirtd daemon
+Requires: libvirt-daemon = %{version}-%{release}
+Requires: libvirt-libs = %{version}-%{release}
+
+%description daemon-driver-vbox
+The vbox driver plugin for the libvirtd daemon, providing
+an implementation of the hypervisor driver APIs using
+VirtualBox
+%endif
+
+
+%if %{with_libxl}
+%package daemon-driver-libxl
+Summary: Libxl driver plugin for the libvirtd daemon
+Requires: libvirt-daemon = %{version}-%{release}
+Requires: libvirt-libs = %{version}-%{release}
+Obsoletes: libvirt-daemon-driver-xen < 4.3.0
+
+%description daemon-driver-libxl
+The Libxl driver plugin for the libvirtd daemon, providing
+an implementation of the hypervisor driver APIs using
+Libxl
+%endif
+
+
+
+%if %{with_qemu_tcg}
+%package daemon-qemu
+Summary: Server side daemon & driver required to run QEMU guests
+
+Requires: libvirt-daemon = %{version}-%{release}
+Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
+Requires: libvirt-daemon-driver-interface = %{version}-%{release}
+Requires: libvirt-daemon-driver-network = %{version}-%{release}
+Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
+Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
+Requires: libvirt-daemon-driver-secret = %{version}-%{release}
+Requires: libvirt-daemon-driver-storage = %{version}-%{release}
+Requires: qemu
+
+%description daemon-qemu
+Server side daemon and driver required to manage the virtualization
+capabilities of the QEMU TCG emulators
+%endif
+
+
+%if %{with_qemu_kvm}
+%package daemon-kvm
+Summary: Server side daemon & driver required to run KVM guests
+
+Requires: libvirt-daemon = %{version}-%{release}
+Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
+Requires: libvirt-daemon-driver-interface = %{version}-%{release}
+Requires: libvirt-daemon-driver-network = %{version}-%{release}
+Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
+Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
+Requires: libvirt-daemon-driver-secret = %{version}-%{release}
+Requires: libvirt-daemon-driver-storage = %{version}-%{release}
+Requires: qemu-kvm
+
+%description daemon-kvm
+Server side daemon and driver required to manage the virtualization
+capabilities of the KVM hypervisor
+%endif
+
+
+%if %{with_lxc}
+%package daemon-lxc
+Summary: Server side daemon & driver required to run LXC guests
+
+Requires: libvirt-daemon = %{version}-%{release}
+Requires: libvirt-daemon-driver-lxc = %{version}-%{release}
+Requires: libvirt-daemon-driver-interface = %{version}-%{release}
+Requires: libvirt-daemon-driver-network = %{version}-%{release}
+Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
+Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
+Requires: libvirt-daemon-driver-secret = %{version}-%{release}
+Requires: libvirt-daemon-driver-storage = %{version}-%{release}
+
+%description daemon-lxc
+Server side daemon and driver required to manage the virtualization
+capabilities of LXC
+%endif
+
+
+%if %{with_libxl}
+%package daemon-xen
+Summary: Server side daemon & driver required to run XEN guests
+
+Requires: libvirt-daemon = %{version}-%{release}
+    %if %{with_libxl}
+Requires: libvirt-daemon-driver-libxl = %{version}-%{release}
+    %endif
+Requires: libvirt-daemon-driver-interface = %{version}-%{release}
+Requires: libvirt-daemon-driver-network = %{version}-%{release}
+Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
+Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
+Requires: libvirt-daemon-driver-secret = %{version}-%{release}
+Requires: libvirt-daemon-driver-storage = %{version}-%{release}
+Requires: xen
+
+%description daemon-xen
+Server side daemon and driver required to manage the virtualization
+capabilities of XEN
+%endif
+
+%if %{with_vbox}
+%package daemon-vbox
+Summary: Server side daemon & driver required to run VirtualBox guests
+
+Requires: libvirt-daemon = %{version}-%{release}
+Requires: libvirt-daemon-driver-vbox = %{version}-%{release}
+Requires: libvirt-daemon-driver-interface = %{version}-%{release}
+Requires: libvirt-daemon-driver-network = %{version}-%{release}
+Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
+Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
+Requires: libvirt-daemon-driver-secret = %{version}-%{release}
+Requires: libvirt-daemon-driver-storage = %{version}-%{release}
+
+%description daemon-vbox
+Server side daemon and driver required to manage the virtualization
+capabilities of VirtualBox
+%endif
+
+%package client
+Summary: Client side utilities of the libvirt library
+Requires: %{name}-libs = %{version}-%{release}
+# Needed by virt-pki-validate script.
+Requires: gnutls-utils
+
+# Ensure smooth upgrades
+Obsoletes: libvirt-bash-completion < 7.3.0
+
+%description client
+The client binaries needed to access the virtualization
+capabilities of recent versions of Linux (and other OSes).
+
+%package libs
+Summary: Client side libraries
+# So remote clients can access libvirt over SSH tunnel
+Requires: cyrus-sasl
+# Needed by default sasl.conf - no onerous extra deps, since
+# 100's of other things on a system already pull in krb5-libs
+Requires: cyrus-sasl-gssapi
+
+%description libs
+Shared libraries for accessing the libvirt daemon.
+
+%if %{with_wireshark}
+%package wireshark
+Summary: Wireshark dissector plugin for libvirt RPC transactions
+Requires: wireshark
+Requires: %{name}-libs = %{version}-%{release}
+
+%description wireshark
+Wireshark dissector plugin for better analysis of libvirt RPC traffic.
+%endif
+
+%if %{with_lxc}
+%package login-shell
+Summary: Login shell for connecting users to an LXC container
+Requires: %{name}-libs = %{version}-%{release}
+
+%description login-shell
+Provides the set-uid virt-login-shell binary that is used to
+connect a user to an LXC container when they login, by switching
+namespaces.
+%endif
+
+%package devel
+Summary: Libraries, includes, etc. to compile with the libvirt library
+Requires: %{name}-libs = %{version}-%{release}
+Requires: pkgconfig
+
+%description devel
+Include header files & development libraries for the libvirt C library.
+
+%if %{with_sanlock}
+%package lock-sanlock
+Summary: Sanlock lock manager plugin for QEMU driver
+Requires: sanlock >= 2.4
+#for virt-sanlock-cleanup require augeas
+Requires: augeas
+Requires: %{name}-daemon = %{version}-%{release}
+Requires: %{name}-libs = %{version}-%{release}
+
+%description lock-sanlock
+Includes the Sanlock lock manager plugin for the QEMU
+driver
+%endif
+
+%package nss
+Summary: Libvirt plugin for Name Service Switch
+Requires: libvirt-daemon-driver-network = %{version}-%{release}
+
+%description nss
+Libvirt plugin for NSS for translating domain names into IP addresses.
+
+
+%prep
+
+%autosetup -S git_am -N
+
+# "make dist" replaces all symlinks with a copy of the linked files;
+# we need to replace all of them with the original symlinks
+echo "Restoring symlinks"
+while read lnk target; do
+    if [ -e $lnk ]; then
+        rm -rf $lnk
+        ln -s $target $lnk
+    fi
+done <%{_sourcedir}/symlinks || exit 1
+git add .
+git commit -q -a --allow-empty --author 'rpm-build <rpm-build>' -m symlinks
+
+
+git config gc.auto 0
+
+%autopatch
+
+%build
+%if 0%{?fedora} >= %{min_fedora} || 0%{?rhel} >= %{min_rhel}
+    %define supported_platform 1
+%else
+    %define supported_platform 0
+%endif
+
+%if ! %{supported_platform}
+echo "This RPM requires either Fedora >= %{min_fedora} or RHEL >= %{min_rhel}"
+exit 1
+%endif
+
+%if %{with_qemu}
+    %define arg_qemu -Ddriver_qemu=enabled
+%else
+    %define arg_qemu -Ddriver_qemu=disabled
+%endif
+
+%if %{with_openvz}
+    %define arg_openvz -Ddriver_openvz=enabled
+%else
+    %define arg_openvz -Ddriver_openvz=disabled
+%endif
+
+%if %{with_lxc}
+    %define arg_lxc -Ddriver_lxc=enabled
+    %define arg_login_shell -Dlogin_shell=enabled
+%else
+    %define arg_lxc -Ddriver_lxc=disabled
+    %define arg_login_shell -Dlogin_shell=disabled
+%endif
+
+%if %{with_vbox}
+    %define arg_vbox -Ddriver_vbox=enabled
+%else
+    %define arg_vbox -Ddriver_vbox=disabled
+%endif
+
+%if %{with_libxl}
+    %define arg_libxl -Ddriver_libxl=enabled
+%else
+    %define arg_libxl -Ddriver_libxl=disabled
+%endif
+
+%if %{with_esx}
+    %define arg_esx -Ddriver_esx=enabled -Dcurl=enabled
+%else
+    %define arg_esx -Ddriver_esx=disabled -Dcurl=disabled
+%endif
+
+%if %{with_hyperv}
+    %define arg_hyperv -Ddriver_hyperv=enabled -Dopenwsman=enabled
+%else
+    %define arg_hyperv -Ddriver_hyperv=disabled -Dopenwsman=disabled
+%endif
+
+%if %{with_vmware}
+    %define arg_vmware -Ddriver_vmware=enabled
+%else
+    %define arg_vmware -Ddriver_vmware=disabled
+%endif
+
+%if %{with_storage_rbd}
+    %define arg_storage_rbd -Dstorage_rbd=enabled
+%else
+    %define arg_storage_rbd -Dstorage_rbd=disabled
+%endif
+
+%if %{with_storage_sheepdog}
+    %define arg_storage_sheepdog -Dstorage_sheepdog=enabled
+%else
+    %define arg_storage_sheepdog -Dstorage_sheepdog=disabled
+%endif
+
+%if %{with_storage_gluster}
+    %define arg_storage_gluster -Dstorage_gluster=enabled -Dglusterfs=enabled
+%else
+    %define arg_storage_gluster -Dstorage_gluster=disabled -Dglusterfs=disabled
+%endif
+
+%if %{with_storage_zfs}
+    %define arg_storage_zfs -Dstorage_zfs=enabled
+%else
+    %define arg_storage_zfs -Dstorage_zfs=disabled
+%endif
+
+%if %{with_numactl}
+    %define arg_numactl -Dnumactl=enabled
+%else
+    %define arg_numactl -Dnumactl=disabled
+%endif
+
+%if %{with_numad}
+    %define arg_numad -Dnumad=enabled
+%else
+    %define arg_numad -Dnumad=disabled
+%endif
+
+%if %{with_fuse}
+    %define arg_fuse -Dfuse=enabled
+%else
+    %define arg_fuse -Dfuse=disabled
+%endif
+
+%if %{with_sanlock}
+    %define arg_sanlock -Dsanlock=enabled
+%else
+    %define arg_sanlock -Dsanlock=disabled
+%endif
+
+%if %{with_firewalld_zone}
+    %define arg_firewalld_zone -Dfirewalld_zone=enabled
+%else
+    %define arg_firewalld_zone -Dfirewalld_zone=disabled
+%endif
+
+%if %{with_netcf}
+    %define arg_netcf -Dnetcf=enabled
+%else
+    %define arg_netcf -Dnetcf=disabled
+%endif
+
+%if %{with_wireshark}
+    %define arg_wireshark -Dwireshark_dissector=enabled
+%else
+    %define arg_wireshark -Dwireshark_dissector=disabled
+%endif
+
+%if %{with_storage_iscsi_direct}
+    %define arg_storage_iscsi_direct -Dstorage_iscsi_direct=enabled -Dlibiscsi=enabled
+%else
+    %define arg_storage_iscsi_direct -Dstorage_iscsi_direct=disabled -Dlibiscsi=disabled
+%endif
+
+%if %{with_libssh}
+    %define arg_libssh -Dlibssh=enabled
+%else
+    %define arg_libssh -Dlibssh=disabled
+%endif
+
+%if %{with_libssh2}
+    %define arg_libssh2 -Dlibssh2=enabled
+%else
+    %define arg_libssh2 -Dlibssh2=disabled
+%endif
+
+%if %{with_modular_daemons}
+    %define arg_remote_mode -Dremote_default_mode=direct
+%else
+    %define arg_remote_mode -Dremote_default_mode=legacy
+%endif
+
+%define when  %(date +"%%F-%%T")
+%define where %(hostname)
+%define who   %{?packager}%{!?packager:Unknown}
+%define arg_packager -Dpackager="%{who}, %{when}, %{where}"
+%define arg_packager_version -Dpackager_version="%{release}"
+
+%define arg_selinux_mount -Dselinux_mount="/sys/fs/selinux"
+
+# place macros above and build commands below this comment
+
+export SOURCE_DATE_EPOCH=$(stat --printf='%Y' %{_specdir}/%{name}.spec)
+
+%meson \
+           -Drunstatedir=%{_rundir} \
+           %{?arg_qemu} \
+           %{?arg_openvz} \
+           %{?arg_lxc} \
+           %{?arg_vbox} \
+           %{?arg_libxl} \
+           -Dsasl=enabled \
+           -Dpolkit=enabled \
+           -Ddriver_libvirtd=enabled \
+           -Ddriver_remote=enabled \
+           -Ddriver_test=enabled \
+           %{?arg_esx} \
+           %{?arg_hyperv} \
+           %{?arg_vmware} \
+           -Ddriver_vz=disabled \
+           -Ddriver_bhyve=disabled \
+           -Ddriver_ch=disabled \
+           %{?arg_remote_mode} \
+           -Ddriver_interface=enabled \
+           -Ddriver_network=enabled \
+           -Dstorage_fs=enabled \
+           -Dstorage_lvm=enabled \
+           -Dstorage_iscsi=enabled \
+           %{?arg_storage_iscsi_direct} \
+           -Dstorage_scsi=enabled \
+           -Dstorage_disk=enabled \
+           -Dstorage_mpath=enabled \
+           %{?arg_storage_rbd} \
+           %{?arg_storage_sheepdog} \
+           %{?arg_storage_gluster} \
+           %{?arg_storage_zfs} \
+           -Dstorage_vstorage=disabled \
+           %{?arg_numactl} \
+           %{?arg_numad} \
+           -Dcapng=enabled \
+           %{?arg_fuse} \
+           %{?arg_netcf} \
+           -Dselinux=enabled \
+           %{?arg_selinux_mount} \
+           -Dapparmor=disabled \
+           -Dapparmor_profiles=disabled \
+           -Dsecdriver_apparmor=disabled \
+           -Dudev=enabled \
+           -Dyajl=enabled \
+           %{?arg_sanlock} \
+           -Dlibpcap=enabled \
+           -Dlibnl=enabled \
+           -Daudit=enabled \
+           -Ddtrace=enabled \
+           -Dfirewalld=enabled \
+           %{?arg_firewalld_zone} \
+           %{?arg_wireshark} \
+           %{?arg_libssh} \
+           %{?arg_libssh2} \
+           -Dpm_utils=disabled \
+           -Dnss=enabled \
+           %{arg_packager} \
+           %{arg_packager_version} \
+           -Dqemu_user=%{qemu_user} \
+           -Dqemu_group=%{qemu_group} \
+           -Dtls_priority=%{tls_priority} \
+           %{?enable_werror} \
+           -Dexpensive_tests=enabled \
+           -Dinit_script=systemd \
+           -Ddocs=enabled \
+           -Dtests=enabled \
+           -Drpath=disabled \
+           %{?arg_login_shell}
+
+%meson_build
+
+%install
+rm -fr %{buildroot}
+
+export SOURCE_DATE_EPOCH=$(stat --printf='%Y' %{_specdir}/%{name}.spec)
+
+%meson_install
+
+rm -f $RPM_BUILD_ROOT%{_libdir}/*.la
+rm -f $RPM_BUILD_ROOT%{_libdir}/*.a
+rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.la
+rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.a
+rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.la
+rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.a
+rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-backend/*.la
+rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-backend/*.a
+rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-file/*.la
+rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-file/*.a
+%if %{with_wireshark}
+rm -f $RPM_BUILD_ROOT%{wireshark_plugindir}/libvirt.la
+%endif
+
+install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/lib/libvirt/dnsmasq/
+# We don't want to install /etc/libvirt/qemu/networks in the main %%files list
+# because if the admin wants to delete the default network completely, we don't
+# want to end up re-incarnating it on every RPM upgrade.
+install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/
+cp $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml \
+   $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml
+# libvirt saves this file with mode 0600
+chmod 0600 $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml
+
+# nwfilter files are installed in /usr/share/libvirt and copied to /etc in %%post
+# to avoid verification errors on changed files in /etc
+install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/nwfilter/
+cp -a $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter/*.xml \
+    $RPM_BUILD_ROOT%{_datadir}/libvirt/nwfilter/
+# libvirt saves these files with mode 600
+chmod 600 $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter/*.xml
+
+%if ! %{with_qemu}
+rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_qemu.aug
+rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
+%endif
+%find_lang %{name}
+
+%if ! %{with_sanlock}
+rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirt_sanlock.aug
+rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug
+%endif
+
+%if ! %{with_lxc}
+rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_lxc.aug
+rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
+%endif
+
+%if ! %{with_qemu}
+rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf
+rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu
+%endif
+%if ! %{with_lxc}
+rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/lxc.conf
+rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.lxc
+%endif
+%if ! %{with_libxl}
+rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/libxl.conf
+rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.libxl
+rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_libxl.aug
+rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug
+%endif
+
+# Copied into libvirt-docs subpackage eventually
+mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt libvirt-docs
+
+%ifarch %{arches_systemtap_64bit}
+mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes.stp \
+   $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes-64.stp
+
+    %if %{with_qemu}
+mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes.stp \
+   $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes-64.stp
+    %endif
+%endif
+
+%check
+# Building on slow archs, like emulated s390x in Fedora copr, requires
+# raising the test timeout
+VIR_TEST_DEBUG=1 %meson_test --no-suite syntax-check --timeout-multiplier 10
+
+%define libvirt_daemon_schedule_restart() mkdir -p %{_localstatedir}/lib/rpm-state/libvirt || : \
+/bin/systemctl is-active %1.service 1>/dev/null 2>&1 && \
+  touch %{_localstatedir}/lib/rpm-state/libvirt/restart-%1 || :
+
+%define libvirt_daemon_finish_restart() rm -f %{_localstatedir}/lib/rpm-state/libvirt/restart-%1 \
+rmdir %{_localstatedir}/lib/rpm-state/libvirt 2>/dev/null || :
+
+%define libvirt_daemon_needs_restart() -f %{_localstatedir}/lib/rpm-state/libvirt/restart-%1
+
+%define libvirt_daemon_perform_restart() if test %libvirt_daemon_needs_restart %1 \
+then \
+  /bin/systemctl try-restart %1.service >/dev/null 2>&1 || : \
+fi \
+%libvirt_daemon_finish_restart %1
+
+%define libvirt_daemon_systemd_post() %systemd_post %1.socket %1-ro.socket %1-admin.socket %1.service
+
+%define libvirt_daemon_systemd_post_inet() %systemd_post %1.socket %1-ro.socket %1-admin.socket %1-tls.socket %1-tcp.socket %1.service
+
+%define libvirt_daemon_systemd_preun() %systemd_preun %1.service %1-ro.socket %1-admin.socket %1.socket
+
+%define libvirt_daemon_systemd_preun_inet() %systemd_preun %1.service %1-ro.socket %1-admin.socket %1-tls.socket %1-tcp.socket %1.socket
+
+%pre daemon
+# 'libvirt' group is just to allow password-less polkit access to
+# libvirtd. The uid number is irrelevant, so we use dynamic allocation
+# described at the above link.
+getent group libvirt >/dev/null || groupadd -r libvirt
+
+exit 0
+
+%post daemon
+%libvirt_daemon_systemd_post virtlogd
+%libvirt_daemon_systemd_post virtlockdd
+%if %{with_modular_daemons}
+%libvirt_daemon_systemd_post_inet virtproxyd
+%else
+%libvirt_daemon_systemd_post_inet libvirtd
+%endif
+
+%systemd_post libvirt-guests.service
+
+%libvirt_daemon_schedule_restart libvirtd
+
+%preun daemon
+%systemd_preun libvirt-guests.service
+
+%libvirt_daemon_systemd_preun_inet libvirtd
+%libvirt_daemon_systemd_preun_inet virtproxyd
+%libvirt_daemon_systemd_preun virtlogd
+%libvirt_daemon_systemd_preun virtlockdd
+
+%postun daemon
+/bin/systemctl daemon-reload >/dev/null 2>&1 || :
+if [ $1 -ge 1 ] ; then
+    /bin/systemctl reload-or-try-restart virtlockd.service virtlogd.service >/dev/null 2>&1 || :
+fi
+%systemd_postun libvirt-guests.service
+
+# In upgrade scenario we must explicitly enable virtlockd/virtlogd
+# sockets, if libvirtd is already enabled and start them if
+# libvirtd is running, otherwise you'll get failures to start
+# guests
+%triggerpostun daemon -- libvirt-daemon < 1.3.0
+if [ $1 -ge 1 ] ; then
+    /bin/systemctl is-enabled libvirtd.service 1>/dev/null 2>&1 &&
+        /bin/systemctl enable virtlogd.socket virtlogd-admin.socket || :
+    /bin/systemctl is-active libvirtd.service 1>/dev/null 2>&1 &&
+        /bin/systemctl start virtlogd.socket virtlogd-admin.socket || :
+fi
+
+%posttrans daemon
+if test %libvirt_daemon_needs_restart libvirtd
+then
+    # See if user has previously modified their install to
+    # tell libvirtd to use --listen
+    grep -E '^LIBVIRTD_ARGS=.*--listen' /etc/sysconfig/libvirtd 1>/dev/null 2>&1
+    if test $? = 0
+    then
+        # Then lets keep honouring --listen and *not* use
+        # systemd socket activation, because switching things
+        # might confuse mgmt tool like puppet/ansible that
+        # expect the old style libvirtd
+        /bin/systemctl mask \
+                libvirtd.socket \
+                libvirtd-ro.socket \
+                libvirtd-admin.socket \
+                libvirtd-tls.socket \
+                libvirtd-tcp.socket >/dev/null 2>&1 || :
+    else
+        # Old libvirtd owns the sockets and will delete them on
+        # shutdown. Can't use a try-restart as libvirtd will simply
+        # own the sockets again when it comes back up. Thus we must
+        # do this particular ordering, so that we get libvirtd
+        # running with socket activation in use
+        /bin/systemctl is-active libvirtd.service 1>/dev/null 2>&1
+        if test $? = 0
+        then
+            /bin/systemctl stop libvirtd.service >/dev/null 2>&1 || :
+
+            /bin/systemctl try-restart \
+                    libvirtd.socket \
+                    libvirtd-ro.socket \
+                    libvirtd-admin.socket >/dev/null 2>&1 || :
+
+            /bin/systemctl start libvirtd.service >/dev/null 2>&1 || :
+        fi
+    fi
+fi
+
+%libvirt_daemon_finish_restart libvirtd
+
+%post daemon-driver-network
+%if %{with_firewalld_zone}
+    %firewalld_reload
+%endif
+
+%if %{with_modular_daemons}
+%libvirt_daemon_systemd_post virtnetworkd
+%endif
+%libvirt_daemon_schedule_restart virtnetworkd
+
+%preun
+%libvirt_daemon_systemd_preun virtnetworkd
+
+%postun daemon-driver-network
+%if %{with_firewalld_zone}
+    %firewalld_reload
+%endif
+
+%posttrans daemon-driver-network
+%libvirt_daemon_perform_restart virtnetworkd
+
+
+%post daemon-driver-nwfilter
+%if %{with_modular_daemons}
+%libvirt_daemon_systemd_post virtnwfilterd
+%endif
+%libvirt_daemon_schedule_restart virtnwfilterd
+
+%preun daemon-driver-nwfilter
+%libvirt_daemon_systemd_preun virtnwfilterd
+
+%posttrans daemon-driver-nwfilter
+%libvirt_daemon_perform_restart virtnwfilterd
+
+
+%post daemon-driver-nodedev
+%if %{with_modular_daemons}
+%libvirt_daemon_systemd_post virtnodedevd
+%endif
+%libvirt_daemon_schedule_restart virtnodedevd
+
+%preun daemon-driver-nodedev
+%libvirt_daemon_systemd_preun virtnodedevd
+
+%posttrans daemon-driver-nodedev
+%libvirt_daemon_perform_restart virtnodedevd
+
+
+%post daemon-driver-interface
+%if %{with_modular_daemons}
+%libvirt_daemon_systemd_post virtinterfaced
+%endif
+%libvirt_daemon_schedule_restart virtinterfaced
+
+%preun daemon-driver-interface
+%libvirt_daemon_systemd_preun virtinterfaced
+
+%posttrans daemon-driver-interface
+%libvirt_daemon_perform_restart virtinterfaced
+
+
+%post daemon-driver-secret
+%if %{with_modular_daemons}
+%libvirt_daemon_systemd_post virtsecretd
+%endif
+%libvirt_daemon_schedule_restart virtsecretd
+
+%preun daemon-driver-secret
+%libvirt_daemon_systemd_preun virtsecretd
+
+%posttrans daemon-driver-secret
+%libvirt_daemon_perform_restart virtsecretd
+
+
+%post daemon-driver-storage
+%if %{with_modular_daemons}
+%libvirt_daemon_systemd_post virtstoraged
+%endif
+%libvirt_daemon_schedule_restart virtstoraged
+
+%preun daemon-driver-storage
+%libvirt_daemon_systemd_preun virtstoraged
+
+%posttrans daemon-driver-storage
+%libvirt_daemon_perform_restart virtstoraged
+
+
+%if %{with_qemu}
+%post daemon-driver-qemu
+    %if %{with_modular_daemons}
+%libvirt_daemon_systemd_post virtqemud
+    %endif
+%libvirt_daemon_schedule_restart virtqemud
+
+%preun daemon-driver-qemu
+%libvirt_daemon_systemd_preun virtqemud
+
+%posttrans daemon-driver-qemu
+%libvirt_daemon_perform_restart virtqemud
+%endif
+
+
+%if %{with_lxc}
+%post daemon-driver-lxc
+    %if %{with_modular_daemons}
+%libvirt_daemon_systemd_post virtlxcd
+    %endif
+%libvirt_daemon_schedule_restart virtlxcd
+
+%preun daemon-driver-lxc
+%libvirt_daemon_systemd_preun virtlxcd
+
+%posttrans daemon-driver-lxc
+%libvirt_daemon_perform_restart virtlxcd
+%endif
+
+
+%if %{with_vbox}
+%post daemon-driver-vbox
+    %if %{with_modular_daemons}
+%libvirt_daemon_systemd_post virtvboxd
+    %endif
+%libvirt_daemon_schedule_restart virtvboxd
+
+%preun daemon-driver-vbox
+%libvirt_daemon_systemd_preun virtvboxd
+
+%posttrans daemon-driver-vbox
+%libvirt_daemon_perform_restart virtvboxd
+%endif
+
+
+%if %{with_libxl}
+%post daemon-driver-libxl
+    %if %{with_modular_daemons}
+%libvirt_daemon_systemd_post virtxend
+    %endif
+%libvirt_daemon_schedule_restart virtxend
+
+%preun daemon-driver-libxl
+%libvirt_daemon_systemd_preun virtxend
+
+%posttrans daemon-driver-libxl
+%libvirt_daemon_perform_restart virtxend
+%endif
+
+
+%post daemon-config-network
+if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ; then
+    # see if the network used by default network creates a conflict,
+    # and try to resolve it
+    # NB: 192.168.122.0/24 is used in the default.xml template file;
+    # do not modify any of those values here without also modifying
+    # them in the template.
+    orig_sub=122
+    sub=${orig_sub}
+    nl='
+'
+    routes="${nl}$(ip route show | cut -d' ' -f1)${nl}"
+    case ${routes} in
+      *"${nl}192.168.${orig_sub}.0/24${nl}"*)
+        # there was a match, so we need to look for an unused subnet
+        for new_sub in $(seq 124 254); do
+          case ${routes} in
+          *"${nl}192.168.${new_sub}.0/24${nl}"*)
+            ;;
+          *)
+            sub=$new_sub
+            break;
+            ;;
+          esac
+        done
+        ;;
+      *)
+        ;;
+    esac
+
+    sed -e "s/${orig_sub}/${sub}/g" \
+         < %{_datadir}/libvirt/networks/default.xml \
+         > %{_sysconfdir}/libvirt/qemu/networks/default.xml
+    ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
+    # libvirt saves this file with mode 0600
+    chmod 0600 %{_sysconfdir}/libvirt/qemu/networks/default.xml
+
+    # Make sure libvirt picks up the new network defininiton
+    %libvirt_daemon_schedule_restart libvirtd
+    %libvirt_daemon_schedule_restart virtnetworkd
+fi
+
+%posttrans daemon-config-network
+%libvirt_daemon_perform_restart libvirtd
+%libvirt_daemon_perform_restart virtnetworkd
+
+%post daemon-config-nwfilter
+for datadir_file in %{_datadir}/libvirt/nwfilter/*.xml; do
+  sysconfdir_file=%{_sysconfdir}/libvirt/nwfilter/$(basename "$datadir_file")
+  if [ ! -f "$sysconfdir_file" ]; then
+    # libvirt saves these files with mode 600
+    install -m 0600 "$datadir_file" "$sysconfdir_file"
+  fi
+done
+# Make sure libvirt picks up the new nwfilter defininitons
+%libvirt_daemon_schedule_restart libvirtd
+%libvirt_daemon_schedule_restart virtnwfilterd
+
+%posttrans daemon-config-nwfilter
+%libvirt_daemon_perform_restart libvirtd
+%libvirt_daemon_perform_restart virtnwfilterd
+
+%if %{with_qemu}
+%pre daemon-driver-qemu
+# We want soft static allocation of well-known ids, as disk images
+# are commonly shared across NFS mounts by id rather than name; see
+# https://fedoraproject.org/wiki/Packaging:UsersAndGroups
+getent group kvm >/dev/null || groupadd -f -g 36 -r kvm
+getent group qemu >/dev/null || groupadd -f -g 107 -r qemu
+if ! getent passwd qemu >/dev/null; then
+  if ! getent passwd 107 >/dev/null; then
+    useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu
+  else
+    useradd -r -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu
+  fi
+fi
+exit 0
+%endif
+
+%if %{with_lxc}
+%pre login-shell
+getent group virtlogin >/dev/null || groupadd -r virtlogin
+exit 0
+%endif
+
+%files
+
+%files docs
+%doc AUTHORS.rst NEWS.rst README.rst
+%doc libvirt-docs/*
+
+%files daemon
+
+%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/
+
+%{_unitdir}/libvirtd.service
+%{_unitdir}/libvirtd.socket
+%{_unitdir}/libvirtd-ro.socket
+%{_unitdir}/libvirtd-admin.socket
+%{_unitdir}/libvirtd-tcp.socket
+%{_unitdir}/libvirtd-tls.socket
+%{_unitdir}/virtproxyd.service
+%{_unitdir}/virtproxyd.socket
+%{_unitdir}/virtproxyd-ro.socket
+%{_unitdir}/virtproxyd-admin.socket
+%{_unitdir}/virtproxyd-tcp.socket
+%{_unitdir}/virtproxyd-tls.socket
+%{_unitdir}/virt-guest-shutdown.target
+%{_unitdir}/virtlogd.service
+%{_unitdir}/virtlogd.socket
+%{_unitdir}/virtlogd-admin.socket
+%{_unitdir}/virtlockd.service
+%{_unitdir}/virtlockd.socket
+%{_unitdir}/virtlockd-admin.socket
+%{_unitdir}/libvirt-guests.service
+%config(noreplace) %{_sysconfdir}/sysconfig/libvirtd
+%config(noreplace) %{_sysconfdir}/sysconfig/virtproxyd
+%config(noreplace) %{_sysconfdir}/sysconfig/virtlogd
+%config(noreplace) %{_sysconfdir}/sysconfig/virtlockd
+%config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf
+%config(noreplace) %{_sysconfdir}/libvirt/virtproxyd.conf
+%config(noreplace) %{_sysconfdir}/libvirt/virtlogd.conf
+%config(noreplace) %{_sysconfdir}/libvirt/virtlockd.conf
+%config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf
+%config(noreplace) %{_sysconfdir}/sysconfig/libvirt-guests
+%config(noreplace) %{_prefix}/lib/sysctl.d/60-libvirtd.conf
+
+%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd
+%dir %{_datadir}/libvirt/
+
+%ghost %dir %{_rundir}/libvirt/
+
+%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/images/
+%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/filesystems/
+%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/boot/
+%dir %attr(0711, root, root) %{_localstatedir}/cache/libvirt/
+
+
+%dir %attr(0755, root, root) %{_libdir}/libvirt/
+%dir %attr(0755, root, root) %{_libdir}/libvirt/connection-driver/
+%dir %attr(0755, root, root) %{_libdir}/libvirt/lock-driver
+%attr(0755, root, root) %{_libdir}/libvirt/lock-driver/lockd.so
+
+%{_datadir}/augeas/lenses/libvirtd.aug
+%{_datadir}/augeas/lenses/tests/test_libvirtd.aug
+%{_datadir}/augeas/lenses/virtlogd.aug
+%{_datadir}/augeas/lenses/tests/test_virtlogd.aug
+%{_datadir}/augeas/lenses/virtlockd.aug
+%{_datadir}/augeas/lenses/tests/test_virtlockd.aug
+%{_datadir}/augeas/lenses/virtproxyd.aug
+%{_datadir}/augeas/lenses/tests/test_virtproxyd.aug
+%{_datadir}/augeas/lenses/libvirt_lockd.aug
+%if %{with_qemu}
+%{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug
+%endif
+
+%{_datadir}/polkit-1/actions/org.libvirt.unix.policy
+%{_datadir}/polkit-1/actions/org.libvirt.api.policy
+%{_datadir}/polkit-1/rules.d/50-libvirt.rules
+
+%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/
+
+%attr(0755, root, root) %{_libexecdir}/libvirt_iohelper
+
+%attr(0755, root, root) %{_bindir}/virt-ssh-helper
+
+%attr(0755, root, root) %{_sbindir}/libvirtd
+%attr(0755, root, root) %{_sbindir}/virtproxyd
+%attr(0755, root, root) %{_sbindir}/virtlogd
+%attr(0755, root, root) %{_sbindir}/virtlockd
+%attr(0755, root, root) %{_libexecdir}/libvirt-guests.sh
+
+%{_mandir}/man1/virt-admin.1*
+%{_mandir}/man1/virt-host-validate.1*
+%{_mandir}/man8/libvirtd.8*
+%{_mandir}/man8/virtlogd.8*
+%{_mandir}/man8/virtlockd.8*
+%{_mandir}/man8/virtproxyd.8*
+%{_mandir}/man7/virkey*.7*
+
+%{_bindir}/virt-host-validate
+%{_bindir}/virt-admin
+%{_datadir}/bash-completion/completions/virt-admin
+
+%files daemon-config-network
+%dir %{_datadir}/libvirt/networks/
+%{_datadir}/libvirt/networks/default.xml
+%ghost %{_sysconfdir}/libvirt/qemu/networks/default.xml
+%ghost %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
+
+%files daemon-config-nwfilter
+%dir %{_datadir}/libvirt/nwfilter/
+%{_datadir}/libvirt/nwfilter/*.xml
+%ghost %{_sysconfdir}/libvirt/nwfilter/*.xml
+
+%files daemon-driver-interface
+%config(noreplace) %{_sysconfdir}/sysconfig/virtinterfaced
+%config(noreplace) %{_sysconfdir}/libvirt/virtinterfaced.conf
+%{_datadir}/augeas/lenses/virtinterfaced.aug
+%{_datadir}/augeas/lenses/tests/test_virtinterfaced.aug
+%{_unitdir}/virtinterfaced.service
+%{_unitdir}/virtinterfaced.socket
+%{_unitdir}/virtinterfaced-ro.socket
+%{_unitdir}/virtinterfaced-admin.socket
+%attr(0755, root, root) %{_sbindir}/virtinterfaced
+%{_libdir}/%{name}/connection-driver/libvirt_driver_interface.so
+%{_mandir}/man8/virtinterfaced.8*
+
+%files daemon-driver-network
+%config(noreplace) %{_sysconfdir}/sysconfig/virtnetworkd
+%config(noreplace) %{_sysconfdir}/libvirt/virtnetworkd.conf
+%{_datadir}/augeas/lenses/virtnetworkd.aug
+%{_datadir}/augeas/lenses/tests/test_virtnetworkd.aug
+%{_unitdir}/virtnetworkd.service
+%{_unitdir}/virtnetworkd.socket
+%{_unitdir}/virtnetworkd-ro.socket
+%{_unitdir}/virtnetworkd-admin.socket
+%attr(0755, root, root) %{_sbindir}/virtnetworkd
+%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
+%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/
+%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart
+%ghost %dir %{_rundir}/libvirt/network/
+%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/
+%dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/
+%attr(0755, root, root) %{_libexecdir}/libvirt_leaseshelper
+%{_libdir}/%{name}/connection-driver/libvirt_driver_network.so
+%{_mandir}/man8/virtnetworkd.8*
+
+%if %{with_firewalld_zone}
+%{_prefix}/lib/firewalld/zones/libvirt.xml
+%endif
+
+%files daemon-driver-nodedev
+%config(noreplace) %{_sysconfdir}/sysconfig/virtnodedevd
+%config(noreplace) %{_sysconfdir}/libvirt/virtnodedevd.conf
+%{_datadir}/augeas/lenses/virtnodedevd.aug
+%{_datadir}/augeas/lenses/tests/test_virtnodedevd.aug
+%{_unitdir}/virtnodedevd.service
+%{_unitdir}/virtnodedevd.socket
+%{_unitdir}/virtnodedevd-ro.socket
+%{_unitdir}/virtnodedevd-admin.socket
+%attr(0755, root, root) %{_sbindir}/virtnodedevd
+%{_libdir}/%{name}/connection-driver/libvirt_driver_nodedev.so
+%{_mandir}/man8/virtnodedevd.8*
+
+%files daemon-driver-nwfilter
+%config(noreplace) %{_sysconfdir}/sysconfig/virtnwfilterd
+%config(noreplace) %{_sysconfdir}/libvirt/virtnwfilterd.conf
+%{_datadir}/augeas/lenses/virtnwfilterd.aug
+%{_datadir}/augeas/lenses/tests/test_virtnwfilterd.aug
+%{_unitdir}/virtnwfilterd.service
+%{_unitdir}/virtnwfilterd.socket
+%{_unitdir}/virtnwfilterd-ro.socket
+%{_unitdir}/virtnwfilterd-admin.socket
+%attr(0755, root, root) %{_sbindir}/virtnwfilterd
+%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/
+%ghost %dir %{_rundir}/libvirt/network/
+%{_libdir}/%{name}/connection-driver/libvirt_driver_nwfilter.so
+%{_mandir}/man8/virtnwfilterd.8*
+
+%files daemon-driver-secret
+%config(noreplace) %{_sysconfdir}/sysconfig/virtsecretd
+%config(noreplace) %{_sysconfdir}/libvirt/virtsecretd.conf
+%{_datadir}/augeas/lenses/virtsecretd.aug
+%{_datadir}/augeas/lenses/tests/test_virtsecretd.aug
+%{_unitdir}/virtsecretd.service
+%{_unitdir}/virtsecretd.socket
+%{_unitdir}/virtsecretd-ro.socket
+%{_unitdir}/virtsecretd-admin.socket
+%attr(0755, root, root) %{_sbindir}/virtsecretd
+%{_libdir}/%{name}/connection-driver/libvirt_driver_secret.so
+%{_mandir}/man8/virtsecretd.8*
+
+%files daemon-driver-storage
+
+%files daemon-driver-storage-core
+%config(noreplace) %{_sysconfdir}/sysconfig/virtstoraged
+%config(noreplace) %{_sysconfdir}/libvirt/virtstoraged.conf
+%{_datadir}/augeas/lenses/virtstoraged.aug
+%{_datadir}/augeas/lenses/tests/test_virtstoraged.aug
+%{_unitdir}/virtstoraged.service
+%{_unitdir}/virtstoraged.socket
+%{_unitdir}/virtstoraged-ro.socket
+%{_unitdir}/virtstoraged-admin.socket
+%attr(0755, root, root) %{_sbindir}/virtstoraged
+%attr(0755, root, root) %{_libexecdir}/libvirt_parthelper
+%{_libdir}/%{name}/connection-driver/libvirt_driver_storage.so
+%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_fs.so
+%{_libdir}/%{name}/storage-file/libvirt_storage_file_fs.so
+%{_mandir}/man8/virtstoraged.8*
+
+%files daemon-driver-storage-disk
+%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_disk.so
+
+%files daemon-driver-storage-logical
+%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_logical.so
+
+%files daemon-driver-storage-scsi
+%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_scsi.so
+
+%files daemon-driver-storage-iscsi
+%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_iscsi.so
+
+%if %{with_storage_iscsi_direct}
+%files daemon-driver-storage-iscsi-direct
+%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_iscsi-direct.so
+%endif
+
+%files daemon-driver-storage-mpath
+%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_mpath.so
+
+%if %{with_storage_gluster}
+%files daemon-driver-storage-gluster
+%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_gluster.so
+%{_libdir}/%{name}/storage-file/libvirt_storage_file_gluster.so
+%endif
+
+%if %{with_storage_rbd}
+%files daemon-driver-storage-rbd
+%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_rbd.so
+%endif
+
+%if %{with_storage_sheepdog}
+%files daemon-driver-storage-sheepdog
+%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_sheepdog.so
+%endif
+
+%if %{with_storage_zfs}
+%files daemon-driver-storage-zfs
+%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_zfs.so
+%endif
+
+%if %{with_qemu}
+%files daemon-driver-qemu
+%config(noreplace) %{_sysconfdir}/sysconfig/virtqemud
+%config(noreplace) %{_sysconfdir}/libvirt/virtqemud.conf
+%{_datadir}/augeas/lenses/virtqemud.aug
+%{_datadir}/augeas/lenses/tests/test_virtqemud.aug
+%{_unitdir}/virtqemud.service
+%{_unitdir}/virtqemud.socket
+%{_unitdir}/virtqemud-ro.socket
+%{_unitdir}/virtqemud-admin.socket
+%attr(0755, root, root) %{_sbindir}/virtqemud
+%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
+%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/
+%config(noreplace) %{_sysconfdir}/libvirt/qemu.conf
+%config(noreplace) %{_sysconfdir}/libvirt/qemu-lockd.conf
+%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu
+%ghost %dir %{_rundir}/libvirt/qemu/
+%dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/
+%dir %attr(0750, root, root) %{_localstatedir}/cache/libvirt/qemu/
+%{_datadir}/augeas/lenses/libvirtd_qemu.aug
+%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
+%{_libdir}/%{name}/connection-driver/libvirt_driver_qemu.so
+%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/swtpm/
+%dir %attr(0730, tss, tss) %{_localstatedir}/log/swtpm/libvirt/qemu/
+%{_bindir}/virt-qemu-run
+%{_mandir}/man1/virt-qemu-run.1*
+%{_mandir}/man8/virtqemud.8*
+%endif
+
+%if %{with_lxc}
+%files daemon-driver-lxc
+%config(noreplace) %{_sysconfdir}/sysconfig/virtlxcd
+%config(noreplace) %{_sysconfdir}/libvirt/virtlxcd.conf
+%{_datadir}/augeas/lenses/virtlxcd.aug
+%{_datadir}/augeas/lenses/tests/test_virtlxcd.aug
+%{_unitdir}/virtlxcd.service
+%{_unitdir}/virtlxcd.socket
+%{_unitdir}/virtlxcd-ro.socket
+%{_unitdir}/virtlxcd-admin.socket
+%attr(0755, root, root) %{_sbindir}/virtlxcd
+%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/
+%config(noreplace) %{_sysconfdir}/libvirt/lxc.conf
+%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc
+%ghost %dir %{_rundir}/libvirt/lxc/
+%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/
+%{_datadir}/augeas/lenses/libvirtd_lxc.aug
+%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
+%attr(0755, root, root) %{_libexecdir}/libvirt_lxc
+%{_libdir}/%{name}/connection-driver/libvirt_driver_lxc.so
+%{_mandir}/man8/virtlxcd.8*
+%endif
+
+%if %{with_libxl}
+%files daemon-driver-libxl
+%config(noreplace) %{_sysconfdir}/sysconfig/virtxend
+%config(noreplace) %{_sysconfdir}/libvirt/virtxend.conf
+%{_datadir}/augeas/lenses/virtxend.aug
+%{_datadir}/augeas/lenses/tests/test_virtxend.aug
+%{_unitdir}/virtxend.service
+%{_unitdir}/virtxend.socket
+%{_unitdir}/virtxend-ro.socket
+%{_unitdir}/virtxend-admin.socket
+%attr(0755, root, root) %{_sbindir}/virtxend
+%config(noreplace) %{_sysconfdir}/libvirt/libxl.conf
+%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.libxl
+%config(noreplace) %{_sysconfdir}/libvirt/libxl-lockd.conf
+%{_datadir}/augeas/lenses/libvirtd_libxl.aug
+%{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug
+%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/
+%ghost %dir %{_rundir}/libvirt/libxl/
+%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/
+%{_libdir}/%{name}/connection-driver/libvirt_driver_libxl.so
+%{_mandir}/man8/virtxend.8*
+%endif
+
+%if %{with_vbox}
+%files daemon-driver-vbox
+%config(noreplace) %{_sysconfdir}/sysconfig/virtvboxd
+%config(noreplace) %{_sysconfdir}/libvirt/virtvboxd.conf
+%{_datadir}/augeas/lenses/virtvboxd.aug
+%{_datadir}/augeas/lenses/tests/test_virtvboxd.aug
+%{_unitdir}/virtvboxd.service
+%{_unitdir}/virtvboxd.socket
+%{_unitdir}/virtvboxd-ro.socket
+%{_unitdir}/virtvboxd-admin.socket
+%attr(0755, root, root) %{_sbindir}/virtvboxd
+%{_libdir}/%{name}/connection-driver/libvirt_driver_vbox.so
+%{_mandir}/man8/virtvboxd.8*
+%endif
+
+%if %{with_qemu_tcg}
+%files daemon-qemu
+%endif
+
+%if %{with_qemu_kvm}
+%files daemon-kvm
+%endif
+
+%if %{with_lxc}
+%files daemon-lxc
+%endif
+
+%if %{with_libxl}
+%files daemon-xen
+%endif
+
+%if %{with_vbox}
+%files daemon-vbox
+%endif
+
+%if %{with_sanlock}
+%files lock-sanlock
+    %if %{with_qemu}
+%config(noreplace) %{_sysconfdir}/libvirt/qemu-sanlock.conf
+    %endif
+    %if %{with_libxl}
+%config(noreplace) %{_sysconfdir}/libvirt/libxl-sanlock.conf
+    %endif
+%attr(0755, root, root) %{_libdir}/libvirt/lock-driver/sanlock.so
+%{_datadir}/augeas/lenses/libvirt_sanlock.aug
+%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug
+%dir %attr(0770, root, sanlock) %{_localstatedir}/lib/libvirt/sanlock
+%{_sbindir}/virt-sanlock-cleanup
+%{_mandir}/man8/virt-sanlock-cleanup.8*
+%attr(0755, root, root) %{_libexecdir}/libvirt_sanlock_helper
+%endif
+
+%files client
+%{_mandir}/man1/virsh.1*
+%{_mandir}/man1/virt-xml-validate.1*
+%{_mandir}/man1/virt-pki-validate.1*
+%{_bindir}/virsh
+%{_bindir}/virt-xml-validate
+%{_bindir}/virt-pki-validate
+
+%{_datadir}/bash-completion/completions/virsh
+
+%files libs -f %{name}.lang
+%license COPYING COPYING.LESSER
+%config(noreplace) %{_sysconfdir}/libvirt/libvirt.conf
+%config(noreplace) %{_sysconfdir}/libvirt/libvirt-admin.conf
+%{_libdir}/libvirt.so.*
+%{_libdir}/libvirt-qemu.so.*
+%{_libdir}/libvirt-lxc.so.*
+%{_libdir}/libvirt-admin.so.*
+%dir %{_datadir}/libvirt/
+%dir %{_datadir}/libvirt/schemas/
+%dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/
+
+%{_datadir}/systemtap/tapset/libvirt_probes*.stp
+%{_datadir}/systemtap/tapset/libvirt_functions.stp
+%if %{with_qemu}
+%{_datadir}/systemtap/tapset/libvirt_qemu_probes*.stp
+%endif
+
+%{_datadir}/libvirt/schemas/*.rng
+
+%{_datadir}/libvirt/cpu_map/*.xml
+
+%{_datadir}/libvirt/test-screenshot.png
+
+%if %{with_wireshark}
+%files wireshark
+%{wireshark_plugindir}/libvirt.so
+%endif
+
+%files nss
+%{_libdir}/libnss_libvirt.so.2
+%{_libdir}/libnss_libvirt_guest.so.2
+
+%if %{with_lxc}
+%files login-shell
+%attr(4750, root, virtlogin) %{_bindir}/virt-login-shell
+%{_libexecdir}/virt-login-shell-helper
+%config(noreplace) %{_sysconfdir}/libvirt/virt-login-shell.conf
+%{_mandir}/man1/virt-login-shell.1*
+%endif
+
+%files devel
+%{_libdir}/libvirt.so
+%{_libdir}/libvirt-admin.so
+%{_libdir}/libvirt-qemu.so
+%{_libdir}/libvirt-lxc.so
+%dir %{_includedir}/libvirt
+%{_includedir}/libvirt/virterror.h
+%{_includedir}/libvirt/libvirt.h
+%{_includedir}/libvirt/libvirt-admin.h
+%{_includedir}/libvirt/libvirt-common.h
+%{_includedir}/libvirt/libvirt-domain.h
+%{_includedir}/libvirt/libvirt-domain-checkpoint.h
+%{_includedir}/libvirt/libvirt-domain-snapshot.h
+%{_includedir}/libvirt/libvirt-event.h
+%{_includedir}/libvirt/libvirt-host.h
+%{_includedir}/libvirt/libvirt-interface.h
+%{_includedir}/libvirt/libvirt-network.h
+%{_includedir}/libvirt/libvirt-nodedev.h
+%{_includedir}/libvirt/libvirt-nwfilter.h
+%{_includedir}/libvirt/libvirt-secret.h
+%{_includedir}/libvirt/libvirt-storage.h
+%{_includedir}/libvirt/libvirt-stream.h
+%{_includedir}/libvirt/libvirt-qemu.h
+%{_includedir}/libvirt/libvirt-lxc.h
+%{_libdir}/pkgconfig/libvirt.pc
+%{_libdir}/pkgconfig/libvirt-admin.pc
+%{_libdir}/pkgconfig/libvirt-qemu.pc
+%{_libdir}/pkgconfig/libvirt-lxc.pc
+
+%dir %{_datadir}/libvirt/api/
+%{_datadir}/libvirt/api/libvirt-api.xml
+%{_datadir}/libvirt/api/libvirt-admin-api.xml
+%{_datadir}/libvirt/api/libvirt-qemu-api.xml
+%{_datadir}/libvirt/api/libvirt-lxc-api.xml
+
+
+%changelog
+* Wed Nov  3 2021 Jiri Denemark <jdenemar@redhat.com> - 7.9.0-1
+- Rebased to libvirt-7.9.0 (rhbz#2012802)
+- The rebase also fixes the following bugs:
+    rhbz#2011731, rhbz#2012385, rhbz#2013539
+
+* Fri Oct 15 2021 Jiri Denemark <jdenemar@redhat.com> - 7.8.0-1
+- Rebased to libvirt-7.8.0 (rhbz#2012802)
+- The rebase also fixes the following bugs:
+    rhbz#1839070, rhbz#1942275, rhbz#1995865, rhbz#1806857, rhbz#1924616
+    rhbz#1978574, rhbz#1989457, rhbz#1965589, rhbz#1677608, rhbz#1926508
+    rhbz#1810863, rhbz#1845468, rhbz#1738392, rhbz#1965140
+
+* Thu Sep 2 2021 Danilo C. L. de Paula <ddepaula@redhat.com> - 7.6.0-2.fc34
+- Resolves: bz#2000225
+  (Rebase virt:rhel module:stream based on AV-8.6)
+
+* Fri Aug  6 2021 Jiri Denemark <jdenemar@redhat.com> - 6.0.0-37
+- security: fix SELinux label generation logic (CVE-2021-3631)
+- storage_driver: Unlock object on ACL fail in storagePoolLookupByTargetPath (CVE-2021-3667)
+
+* Tue Jun  1 2021 Jiri Denemark <jdenemar@redhat.com> - 6.0.0-36
+- network: make it safe to call networkSetupPrivateChains() multiple times (rhbz#1942805)
+- network: force re-creation of iptables private chains on firewalld restart (rhbz#1942805)
+- hostdev: Update mdev pointer reference after checking device type (rhbz#1940449)
+- hostdev: mdev: Lookup mdevs by sysfs path rather than mdev struct (rhbz#1940449)
+- qemu_firmware: don't error out for unknown firmware features (rhbz#1961562)
+- docs: improve description of secure attribute for loader element (rhbz#1929357)
+- conf: introduce virDomainDefParseBootInitOptions (rhbz#1929357)
+- conf: introduce virDomainDefParseBootKernelOptions (rhbz#1929357)
+- conf: introduce virDomainDefParseBootFirmwareOptions (rhbz#1929357)
+- conf: introduce virDomainDefParseBootLoaderOptions (rhbz#1929357)
+- conf: introduce virDomainDefParseBootAcpiOptions (rhbz#1929357)
+- conf: use switch in virDomainDefParseBootOptions (rhbz#1929357)
+- conf: introduce support for firmware auto-selection feature filtering (rhbz#1929357)
+- qemu: implement support for firmware auto-selection feature filtering (rhbz#1929357)
+- domain_conf: Don't leak def->os.firmwareFeatures (rhbz#1929357)
+- conf: remove duplicated firmware type attribute (rhbz#1929357)
+
+* Thu Mar  4 2021 Jiri Denemark <jdenemar@redhat.com> - 6.0.0-35
+- vircgroupv2: properly detect placement of running VM (rhbz#1798463)
+- virsystemd: export virSystemdHasMachined (rhbz#1798463)
+- virsystemd: introduce virSystemdGetMachineByPID (rhbz#1798463)
+- virsystemd: introduce virSystemdGetMachineUnitByPID (rhbz#1798463)
+- vircgroup: use DBus call to systemd for some APIs (rhbz#1798463)
+- vircgroupv1: refactor virCgroupV1DetectPlacement (rhbz#1798463)
+- vircgroupv2: move task into cgroup before enabling controllers (rhbz#1798463)
+- vircgroup: introduce virCgroupV1Exists and virCgroupV2Exists (rhbz#1798463)
+- vircgroup: introduce nested cgroup to properly work with systemd (rhbz#1798463)
+- tests: add cgroup nested tests (rhbz#1798463)
+- vircgroup: correctly free nested virCgroupPtr (rhbz#1798463)
+- qemu: Add virtio related options to vsock (rhbz#1931548)
+- domain_validate: use defines for cpu period and quota limits (rhbz#1798463)
+- docs: use proper cpu quota value in our documentation (rhbz#1798463)
+- vircgroup: enforce range limit for cpu.shares (rhbz#1798463)
+- cgroup: use virCgroupSetCpuShares instead of virCgroupSetupCpuShares (rhbz#1798463)
+- cpumap: Add support for ibrs CPU feature (rhbz#1926864)
+- cpumap: Add support for svme-addr-check CPU feature (rhbz#1926864)
+- cpu_map: Add EPYC-Milan x86 CPU model (rhbz#1926864)
+- cpu_map: Install x86_EPYC-Milan.xml (rhbz#1926864)
+- cpu_map: Fix spelling of svme-addr-chk feature (rhbz#1926864)
+
+* Mon Feb  1 2021 Jiri Denemark <jdenemar@redhat.com> - 6.0.0-34
+- qemu: move cgroup cpu period and quota defines to vircgroup.h (rhbz#1915733)
+- vircgroupv1: use defines for cpu period and quota limits (rhbz#1915733)
+- vircgroupv2: use defines for cpu period and quota limits (rhbz#1915733)
+- vircgroup: fix cpu quota maximum limit (rhbz#1915733)
+- util: add virNetDevGetPhysPortName (rhbz#1918708)
+- util: avoid manual VIR_FREE of a g_autofree pointer in virPCIGetName() (rhbz#1918708)
+- util: Add phys_port_name support on virPCIGetNetName (rhbz#1918708)
+
+* Thu Jan 21 2021 Jiri Denemark <jdenemar@redhat.com> - 6.0.0-33
+- cpu_map: Fix Icelake Server model number (rhbz#1537734)
+- cputestdata: Add test data for Snowridge (rhbz#1537734)
+- cpu_map: Add support for fsrm CPU feature (rhbz#1537734)
+- cpu_map: Add support for core-capability CPU feature (rhbz#1537734)
+- cpu_map: Add support for split-lock-detect CPU feature (rhbz#1537734)
+- cpu_map: Define and enable Snowridge model (rhbz#1537734)
+- util: fix typo in VIR_MOCK_WRAP_RET_ARGS() (rhbz#1607929)
+- util/tests: enable locking on iptables/ebtables commandlines in unit tests (rhbz#1607929)
+- util/tests: enable locking on iptables/ebtables commandlines by default (rhbz#1607929)
+- tests: fix iptables test case commandline options in virfirewalltest.c (rhbz#1607929)
+- network: be more verbose about the reason for a firewall reload (rhbz#1607929)
+- util: always check for ebtables/iptables binaries, even when using firewalld (rhbz#1607929)
+- util: synchronize with firewalld before we start calling iptables directly (rhbz#1607929)
+- util: call iptables directly rather than via firewalld (rhbz#1607929)
+- util: virhostcpu: Fail when fetching CPU Stats for invalid cpu (rhbz#1915183)
+
+* Tue Dec 15 2020 Jiri Denemark <jdenemar@redhat.com> - 6.0.0-32
+- util: replace macvtap name reservation bitmap with a simple counter (rhbz#1874304)
+- util: assign tap device names using a monotonically increasing integer (rhbz#1874304)
+- util: virNetDevTapCreate: initialize fd to -1 (rhbz#1874304)
+
+* Thu Dec 10 2020 Jiri Denemark <jdenemar@redhat.com> - 6.0.0-31
+- conf: properly clear out autogenerated macvtap names when formatting/parsing (rhbz#1872610)
+- qemu: format 'ramfb' attribute for mediated devices (rhbz#1876297)
+
+* Mon Nov  9 2020 Jiri Denemark <jdenemar@redhat.com> - 6.0.0-30
+- cpu_map: Add missing x86 features in 0x7 CPUID leaf (rhbz#1861506)
+- cpu_map: Add missing x86 features in 0x80000008 CPUID leaf (rhbz#1861506)
+- cpu_map: Add missing AMD SVM features (rhbz#1861506)
+- Add testdata for AMD EPYC 7502 (rhbz#1861506)
+- cpu_map: Defined and enable EPYC-Rome model (rhbz#1861506)
+- cpu_map: Remove monitor feature from EPYC-Rome (rhbz#1861506)
+- tests: qemuxml2argv: Use existing machine type for 'numatune-distances' case (rhbz#1749518)
+- qemuxml2xmltest: Add "numatune-distance" test case (rhbz#1749518)
+- conf: Move and rename virDomainParseScaledValue() (rhbz#1749518)
+- numa_conf: Drop CPU from name of two functions (rhbz#1749518)
+- qemu_command: Rename qemuBuildNumaArgStr() (rhbz#1749518)
+- qemuBuildMachineCommandLine: Drop needless check (rhbz#1749518)
+- numa_conf: Make virDomainNumaSetNodeCpumask() return void (rhbz#1749518)
+- Allow NUMA nodes without vCPUs (rhbz#1749518)
+- conf: Parse and format HMAT (rhbz#1749518)
+- conf: Validate NUMA HMAT configuration (rhbz#1749518)
+- numa: expose HMAT APIs (rhbz#1749518)
+- qemu: Introduce QEMU_CAPS_NUMA_HMAT capability (rhbz#1749518)
+- qemu: Build HMAT command line (rhbz#1749518)
+- qemuBuildNumaCommandLine: Fix @masterInitiator check (rhbz#1749518)
+- numa_conf: Properly check for caches in virDomainNumaDefValidate() (rhbz#1749518)
+- RNG: Allow interleaving of /domain/cpu/numa/cell children (rhbz#1749518)
+
+* Fri Oct  9 2020 Jiri Denemark <jdenemar@redhat.com> - 6.0.0-29
+- qemu: substitute missing model name for host-passthrough (rhbz#1850680)
+- rpc: gendispatch: handle empty flags (CVE-2020-25637)
+- rpc: add support for filtering @acls by uint params (CVE-2020-25637)
+- rpc: require write acl for guest agent in virDomainInterfaceAddresses (CVE-2020-25637)
+- qemu: agent: set ifname to NULL after freeing (CVE-2020-25637)
+- qemu: Fix domfsinfo for non-PCI device information from guest agent (rhbz#1858771)
+- virDomainNetFindIdx: add support for CCW addresses (rhbz#1837495)
+- check for NULL before calling g_regex_unref (rhbz#1861176)
+- virhostcpu.c: fix 'die_id' parsing for Power hosts (rhbz#1876742)
+- qemuFirmwareFillDomain: Fill NVRAM template on migration too (rhbz#1880418)
+- node_device: refactor udevProcessCCW (rhbz#1853289, rhbz#1865932)
+- node_device: detect CSS devices (rhbz#1853289, rhbz#1865932)
+- virsh: nodedev: ability to filter CSS capabilities (rhbz#1853289, rhbz#1865932)
+- node_device: detect DASD devices (rhbz#1853289, rhbz#1865932)
+- udevProcessCSS: Check if def->driver is non-NULL (rhbz#1853289, rhbz#1865932)
+
+* Wed Aug 26 2020 Jiri Denemark <jdenemar@redhat.com> - 6.0.0-28
+- virdevmapper: Don't cache device-mapper major (rhbz#1860421)
+- virdevmapper: Handle kernel without device-mapper support (rhbz#1860421)
+- virdevmapper: Ignore all errors when opening /dev/mapper/control (rhbz#1860421)
+
+* Fri Aug  7 2020 Jiri Denemark <jdenemar@redhat.com> - 6.0.0-27
+- src: assume sys/sysmacros.h always exists on Linux (rhbz#1860421)
+- virdevmapper.c: Join two WITH_DEVMAPPER sections together (rhbz#1860421)
+- virDevMapperGetTargetsImpl: Use VIR_AUTOSTRINGLIST (rhbz#1860421)
+- virdevmapper: Don't use libdevmapper to obtain dependencies (CVE-2020-14339, rhbz#1860421)
+- virDevMapperGetTargets: Don't ignore EBADF (rhbz#1860421)
+
+* Fri Jul 24 2020 Jiri Denemark <jdenemar@redhat.com> - 6.0.0-26
+- qemu: blockjob: Don't base bitmap handling of active-layer block commit on QEMU_CAPS_BLOCKDEV_REOPEN (rhbz#1857779)
+- qemu: blockjob: Actually delete temporary bitmap on failed active commit (rhbz#1857779)
+- qemu: block: Remove 'active-write' bitmap even if there are no bitmaps to merge (rhbz#1857779)
+- qemuDomainBlockPivot: Rename 'actions' to 'bitmapactions' (rhbz#1857779)
+- qemuDomainBlockPivot: Ignore failures of creating active layer bitmap (rhbz#1857779)
+
+* Wed Jun 24 2020 Jiri Denemark <jdenemar@redhat.com> - 6.0.0-25
+- Upgrade components in virt:rhel module:stream for RHEL-8.3 release (rhbz#1828317)
+- conf: Don't format http cookies unless VIR_DOMAIN_DEF_FORMAT_SECURE is used (CVE-2020-14301)
+- util: Introduce a parser for kernel cmdline arguments (rhbz#1848997)
+- qemu: Check if s390 secure guest support is enabled (rhbz#1848997)
+- qemu: Check if AMD secure guest support is enabled (rhbz#1848997)
+- tools: Secure guest check on s390 in virt-host-validate (rhbz#1848997)
+- tools: Secure guest check for AMD in virt-host-validate (rhbz#1848997)
+- docs: Update AMD launch secure description (rhbz#1848997)
+- docs: Describe protected virtualization guest setup (rhbz#1848997)
+
+* Fri Jun 19 2020 Danilo C. L. de Paula <ddepaula@redhat.com> - 6.0.0
+- Resolves: bz#1828317
+(Upgrade components in virt:rhel module:stream for RHEL-8.3 release)
+
+* Tue Jun 09 2020 Danilo C. L. de Paula <ddepaula@redhat.com> - 6.0.0
+- Resolves: bz#1810193
+(Upgrade components in virt:rhel module:stream for RHEL-8.3 release)
+
+* Fri Jun 05 2020 Danilo C. L. de Paula <ddepaula@redhat.com> - 6.0.0
+- Resolves: bz#1810193
+(Upgrade components in virt:rhel module:stream for RHEL-8.3 release)
+
+* Mon Apr 27 2020 Danilo C. L. de Paula <ddepaula@redhat.com> - 6.0.0
+- Resolves: bz#1810193
+  (Upgrade components in virt:rhel module:stream for RHEL-8.3 release)
+
+* Mon Mar 16 2020 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-42
+- RHEL: virscsi: Check device type before getting it's /dev node name (rhbz#1808388)
+- RHEL: virscsi: Support TAPEs in virSCSIDeviceGetDevName() (rhbz#1808388)
+- RHEL: virscsi: Introduce and use virSCSIDeviceGetUnprivSGIOSysfsPath() (rhbz#1808388)
+- RHEL: virutil: Accept non-block devices in virGetDeviceID() (rhbz#1808388)
+- RHEL: qemuSetUnprivSGIO: Actually use calculated @sysfs_path to set unpriv_sgio (rhbz#1808388)
+- RHEL: qemuCheckUnprivSGIO: use @sysfs_path to get unpriv_sgio (rhbz#1808399)
+
+* Wed Mar  4 2020 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-41
+- qemu: Translate features in virQEMUCapsGetCPUFeatures (rhbz#1804224)
+
+* Mon Feb 17 2020 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-40
+- process: wait longer on kill per assigned Hostdev (rhbz#1785338)
+- process: wait longer 5->30s on hard shutdown (rhbz#1785338)
+
+* Mon Feb 10 2020 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-39
+- selinux: Do not report an error when not returning -1 (rhbz#1788096)
+- qemu: Fix hyperv features with QEMU 4.1 (rhbz#1794868)
+- qemu: Prefer dashes for hyperv features (rhbz#1794868)
+- cpu: Drop KVM_ from hyperv feature macros (rhbz#1794868)
+- cpu: Drop unused KVM features (rhbz#1794868)
+- qemu: Fix KVM features with QEMU 4.1 (rhbz#1794868)
+- cpu: Drop CPUID definition for hv-spinlocks (rhbz#1794868)
+
+* Tue Jan 14 2020 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-38
+- cpu_map/x86: Add support for BFLOAT16 data type (rhbz#1749516)
+
+* Fri Dec 13 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-37
+- cpu_map: Add TAA_NO bit for IA32_ARCH_CAPABILITIES MSR (CVE-2019-11135)
+- cpu_map: Add TSX_CTRL bit for IA32_ARCH_CAPABILITIES MSR (CVE-2019-11135)
+
+* Thu Nov 21 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-36
+- cpu_conf: Pass policy to CPU feature filtering callbacks (rhbz#1749672, rhbz#1756156, rhbz#1721608)
+- qemuxml2*test: Add tests for Icelake-Server, -pconfig (rhbz#1749672, rhbz#1756156, rhbz#1721608)
+- qemu: Drop disabled CPU features unknown to QEMU (rhbz#1749672, rhbz#1756156, rhbz#1721608)
+- cputest: Add data for Ice Lake Server CPU (rhbz#1749672, rhbz#1756156, rhbz#1721608)
+- cpu_map: Drop pconfig from Icelake-Server CPU model (rhbz#1749672, rhbz#1756156, rhbz#1721608)
+- qemu: Fix NULL ptr dereference caused by qemuDomainDefFormatBufInternal (rhbz#1749672, rhbz#1756156, rhbz#1721608)
+
+* Mon Sep 16 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-35
+- vircgroupv2: fix setting cpu.max period (rhbz#1749227)
+
+* Wed Sep  4 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-34
+- vircgroupv2: fix abort in VIR_AUTOFREE (rhbz#1747440)
+
+* Mon Aug 26 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-33
+- vircgroupv2: fix parsing multiple values in single file (rhbz#1741825)
+- vircgroupv2: fix virCgroupV2GetCpuCfsQuota for "max" value (rhbz#1741837)
+
+* Mon Aug 19 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-32
+- virDomainObjListAddLocked: Produce better error message than 'Duplicate key' (rhbz#1737790)
+- virdbus: Grab a ref as long as the while loop is executed (rhbz#1741900)
+
+* Tue Jul 30 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-31
+- virDomainObjListAddLocked: fix double free (rhbz#1728530)
+- docs: schemas: Decouple the virtio options from each other (rhbz#1729675)
+- util: command: use VIR_AUTOFREE instead of VIR_FREE for scalar types (rhbz#1721434)
+- util: command: define cleanup function using VIR_DEFINE_AUTOPTR_FUNC (rhbz#1721434)
+- util: netdevopenvswitch: use VIR_AUTOFREE instead of VIR_FREE for scalar types (rhbz#1721434)
+- util: virnetdevopenvswitch: Drop an unused variable @ovs_timeout (rhbz#1721434)
+- util: netdevopenvswitch: use VIR_AUTOPTR for aggregate types (rhbz#1721434)
+- util: suppress unimportant ovs-vsctl errors when getting interface stats (rhbz#1721434)
+- virNetDevOpenvswitchInterfaceStats: Optimize for speed (rhbz#1721434)
+- test: Introduce virnetdevopenvswitchtest (rhbz#1721434)
+- vircommand: Separate mass FD closing into a function (rhbz#1721434)
+- virCommand: use procfs to learn opened FDs (rhbz#1721434)
+- util: command: Ignore bitmap errors when enumerating file descriptors to close (rhbz#1721434)
+- util: Avoid possible error in virCommandMassClose (rhbz#1721434)
+- vircgroup: fix cgroups v2 controllers detection (rhbz#1689297)
+- vircgroupv2: store enabled controllers (rhbz#1689297)
+
+* Wed Jul  3 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-30
+- virWaitForDevices: Drop confusing part of comment (rhbz#1710575)
+- lib: Drop UDEVSETTLE (rhbz#1710575)
+- m4: Provide default value fore UDEVADM (rhbz#1710575)
+- m4: Drop needless string checks (rhbz#1710575)
+- util: vircgroup: introduce virCgroup(Get|Set)ValueRaw (rhbz#1658890)
+- util: vircgroup: move virCgroupGetValueStr out of virCgroupGetValueForBlkDev (rhbz#1658890)
+- util: vircgroupv1: add support for BFQ blkio files (rhbz#1658890)
+- util: vircgroupv2: add support for BFQ files (rhbz#1658890)
+- Handle copying bitmaps to larger data buffers (rhbz#1703160)
+
+* Tue Jul  2 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-29
+- cpu: allow include files for CPU definition (rhbz#1686895)
+- cpu: fix cleanup when signature parsing fails (rhbz#1686895)
+- cpu: push more parsing logic into common code (rhbz#1686895)
+- cpu: simplify failure cleanup paths (rhbz#1686895)
+- cpu_map: Add support for arch-capabilities feature (rhbz#1693433)
+- cputest: Add data for Intel(R) Xeon(R) CPU E5-2630 v4 (rhbz#1686895)
+- cputest: Add data for Intel(R) Core(TM) i7-7600U (rhbz#1686895)
+- cputest: Add data for Intel(R) Xeon(R) CPU E7540 (rhbz#1686895)
+- cputest: Add data for Intel(R) Xeon(R) CPU E5-2650 (rhbz#1686895)
+- cputest: Add data for Intel(R) Core(TM) i7-8700 (rhbz#1686895)
+- cpu_x86: Separate ancestor model parsing from x86ModelParse (rhbz#1686895)
+- cpu_x86: Separate signature parsing from x86ModelParse (rhbz#1686895)
+- cpu_x86: Separate vendor parsing from x86ModelParse (rhbz#1686895)
+- cpu_x86: Separate feature list parsing from x86ModelParse (rhbz#1686895)
+- cpu_x86: Make sure CPU model names are unique in cpu_map (rhbz#1686895)
+- cpu_x86: Add x86ModelCopySignatures helper (rhbz#1686895)
+- cpu_x86: Store CPU signature in an array (rhbz#1686895)
+- cpu_x86: Allow multiple signatures for a CPU model (rhbz#1686895)
+- cpu_x86: Log decoded CPU model and signatures (rhbz#1686895)
+- qemu_capabilities: Inroduce virQEMUCapsGetCPUModelX86Data (rhbz#1686895)
+- qemu_capabilities: Introduce virQEMUCapsGetCPUModelInfo (rhbz#1686895)
+- qemu_capabilities: Use virQEMUCapsGetCPUModelInfo (rhbz#1686895)
+- cpu_x86: Add virCPUx86DataGetSignature for tests (rhbz#1686895)
+- cpu_map: Add hex representation of signatures (rhbz#1686895)
+- cputest: Test CPU signatures (rhbz#1686895)
+- cpu_map: Add more signatures for Conroe CPU model (rhbz#1686895)
+- cpu_map: Add more signatures for Penryn CPU model (rhbz#1686895)
+- cpu_map: Add more signatures for Nehalem CPU models (rhbz#1686895)
+- cpu_map: Add more signatures for Westmere CPU model (rhbz#1686895)
+- cpu_map: Add more signatures for SandyBridge CPU models (rhbz#1686895)
+- cpu_map: Add more signatures for IvyBridge CPU models (rhbz#1686895)
+- cpu_map: Add more signatures for Haswell CPU models (rhbz#1686895)
+- cpu_map: Add more signatures for Broadwell CPU models (rhbz#1686895)
+- cpu_map: Add more signatures for Skylake-Client CPU models (rhbz#1686895)
+- cpu: Don't access invalid memory in virCPUx86Translate (rhbz#1686895)
+- cpu_x86: Require <cpuid> within <feature> in CPU map (rhbz#1697627)
+- cputest: Add data for Intel(R) Xeon(R) Platinum 8268 CPU (rhbz#1693433)
+- cpu_map: Add Cascadelake-Server CPU model (rhbz#1693433)
+- cpu_x86: Introduce virCPUx86DataItem container struct (rhbz#1697627)
+- cpu_x86: Rename virCPUx86Vendor.cpuid (rhbz#1697627)
+- cpu_x86: Rename virCPUx86DataItem variables (rhbz#1697627)
+- cpu_x86: Rename x86DataCpuidNext function (rhbz#1697627)
+- cpu_x86: Rename x86DataCpuid (rhbz#1697627)
+- cpu_x86: Rename virCPUx86CPUIDSorter (rhbz#1697627)
+- cpu_x86: Rename virCPUx86DataAddCPUIDInt (rhbz#1697627)
+- cpu_x86: Rename virCPUx86DataAddCPUID (rhbz#1697627)
+- cpu_x86: Rename virCPUx86VendorToCPUID (rhbz#1697627)
+- cpu_x86: Simplify x86DataAdd (rhbz#1697627)
+- cpu_x86: Introduce virCPUx86DataCmp (rhbz#1697627)
+- cpu_x86: Make x86cpuidSetBits more general (rhbz#1697627)
+- cpu_x86: Make x86cpuidClearBits more general (rhbz#1697627)
+- cpu_x86: Make x86cpuidAndBits more general (rhbz#1697627)
+- cpu_x86: Make x86cpuidMatchMasked more general (rhbz#1697627)
+- cpu_x86: Make x86cpuidMatch more general (rhbz#1697627)
+- cpu_x86: Store virCPUx86DataItem content in union (rhbz#1697627)
+- cpu_x86: Add support for storing MSR features in CPU map (rhbz#1697627)
+- cpu_x86: Move *CheckFeature functions (rhbz#1697627)
+- cputest: Add support for MSR features to cpu-parse.sh (rhbz#1697627)
+- util: file: introduce VIR_AUTOCLOSE macro to close fd of the file automatically (rhbz#1697627)
+- vircpuhost: Add support for reading MSRs (rhbz#1697627)
+- virhostcpu: Make virHostCPUGetMSR() work only on x86 (rhbz#1697627)
+- cpu_x86: Fix placement of *CheckFeature functions (rhbz#1697627)
+- cpu_conf: Introduce virCPUDefFilterFeatures (rhbz#1697627)
+- qemu_command: Use consistent syntax for CPU features (rhbz#1697627)
+- tests: Add QEMU caps data for future 4.1.0 (rhbz#1697627)
+- tests: Add domain capabilities case for QEMU 4.1.0 (rhbz#1697627)
+- qemuxml2argvtest: Add test for CPU features translation (rhbz#1697627)
+- qemu: Add APIs for translating CPU features (rhbz#1697627)
+- qemu: Probe for max-x86_64-cpu type (rhbz#1697627)
+- qemu: Probe for "unavailable-features" CPU property (rhbz#1697627)
+- qemu: Probe host CPU after capabilities (rhbz#1697627)
+- qemu_command: Use canonical names of CPU features (rhbz#1697627)
+- qemu: Translate feature names from query-cpu-model-expansion (rhbz#1697627)
+- qemu: Don't use full CPU model expansion (rhbz#1697627)
+- qemu: Make qemuMonitorGetGuestCPU usable on x86 only (rhbz#1697627)
+- cpu: Introduce virCPUDataAddFeature (rhbz#1697627)
+- qemu: Add type filter to qemuMonitorJSONParsePropsList (rhbz#1697627)
+- util: string: Introduce macro for automatic string lists (rhbz#1697627)
+- util: json: define cleanup function using VIR_DEFINE_AUTOPTR_FUNC (rhbz#1697627)
+- qemu: Introduce generic qemuMonitorGetGuestCPU (rhbz#1697627)
+- qemu_process: Prefer generic qemuMonitorGetGuestCPU (rhbz#1697627)
+- util: Rework virStringListAdd (rhbz#1697627)
+- conf: Introduce virCPUDefCheckFeatures (rhbz#1697627)
+- cpu_x86: Turn virCPUx86DataIteratorInit into a function (rhbz#1697627)
+- cpu_x86: Introduce virCPUx86FeatureFilter*MSR (rhbz#1697627)
+- cpu_x86: Read CPU features from IA32_ARCH_CAPABILITIES MSR (rhbz#1697627)
+- cpu_map: Introduce IA32_ARCH_CAPABILITIES MSR features (rhbz#1697627)
+- qemu: Forbid MSR features with old QEMU (rhbz#1697627)
+- qemu: Drop MSR features from host-model with old QEMU (rhbz#1697627)
+- cpu_x86: Fix memory leak - virCPUx86GetHost (rhbz#1697627)
+- qemu: Use @tmpChr in qemuDomainDetachChrDevice to build device string (rhbz#1624204)
+- qemu: Drop "user-" prefix for guestfwd netdev (rhbz#1624204)
+- qemu_hotplug: Attach guestfwd using netdev_add (rhbz#1624204)
+- qemu_hotplug: Detach guestfwd using netdev_del (rhbz#1624204)
+- qemuhotplugtest: Test guestfwd attach and detach (rhbz#1624204)
+- daemon: Register secret driver before storage driver (rhbz#1685151)
+- bhyve: Move autostarting of domains into bhyveStateInitialize (rhbz#1685151)
+- Revert "virStateDriver - Separate AutoStart from Initialize" (rhbz#1685151)
+- Revert "Separate out StateAutoStart from StateInitialize" (rhbz#1685151)
+- util: moving 'type' argument to avoid issues with mount() syscall. (rhbz#1689297)
+- util: cgroup: use VIR_AUTOFREE instead of VIR_FREE for scalar types (rhbz#1689297)
+- vircgroup: Rename structs to start with underscore (rhbz#1689297)
+- vircgroup: Introduce standard set of typedefs and use them (rhbz#1689297)
+- vircgroup: Extract file link resolving into separate function (rhbz#1689297)
+- vircgroup: Remove unused function virCgroupKill() (rhbz#1689297)
+- vircgroup: Unexport unused function virCgroupAddTaskController() (rhbz#1689297)
+- vircgroup: Unexport unused function virCgroupRemoveRecursively (rhbz#1689297)
+- vircgroup: Move function used in tests into vircgrouppriv.h (rhbz#1689297)
+- vircgroup: Remove pointless bool parameter (rhbz#1689297)
+- vircgroup: Extract mount options matching into function (rhbz#1689297)
+- vircgroup: Use virCgroupMountOptsMatchController in virCgroupDetectPlacement (rhbz#1689297)
+- vircgroup: Introduce virCgroupEnableMissingControllers (rhbz#1689297)
+- vircgroup: machinename will never be NULL (rhbz#1689297)
+- vircgroup: Remove virCgroupAddTaskController (rhbz#1689297)
+- vircgroup: Introduce virCgroupGetMemoryStat (rhbz#1689297)
+- lxc: Use virCgroupGetMemoryStat (rhbz#1689297)
+- vircgroup: fix MinGW build (rhbz#1689297)
+- vircgroup: Duplicate string before modifying (rhbz#1689297)
+- vircgroup: Extract controller detection into function (rhbz#1689297)
+- vircgroup: Extract placement validation into function (rhbz#1689297)
+- vircgroup: Split virCgroupPathOfController into two functions (rhbz#1689297)
+- vircgroup: Call virCgroupRemove inside virCgroupMakeGroup (rhbz#1689297)
+- vircgroup: Simplify if conditions in virCgroupMakeGroup (rhbz#1689297)
+- vircgroup: Remove obsolete sa_assert (rhbz#1689297)
+- tests: Resolve possible overrun (rhbz#1689297)
+- vircgroup: cleanup controllers not managed by systemd on error (rhbz#1689297)
+- vircgroup: fix bug in virCgroupEnableMissingControllers (rhbz#1689297)
+- vircgroup: rename virCgroupAdd.*Task to virCgroupAdd.*Process (rhbz#1689297)
+- vircgroup: introduce virCgroupTaskFlags (rhbz#1689297)
+- vircgroup: introduce virCgroupAddThread (rhbz#1689297)
+- vircgroupmock: cleanup unused cgroup files (rhbz#1689297)
+- vircgroupmock: rewrite cgroup fopen mocking (rhbz#1689297)
+- vircgrouptest: call virCgroupDetectMounts directly (rhbz#1689297)
+- vircgrouptest: call virCgroupNewSelf instead virCgroupDetectMounts (rhbz#1689297)
+- util: introduce vircgroupbackend files (rhbz#1689297)
+- vircgroup: introduce cgroup v1 backend files (rhbz#1689297)
+- vircgroup: extract virCgroupV1Available (rhbz#1689297)
+- vircgroup: detect available backend for cgroup (rhbz#1689297)
+- vircgroup: extract virCgroupV1ValidateMachineGroup (rhbz#1689297)
+- vircgroup: extract virCgroupV1CopyMounts (rhbz#1689297)
+- vircgroup: extract v1 detect functions (rhbz#1689297)
+- vircgroup: extract virCgroupV1CopyPlacement (rhbz#1689297)
+- vircgroup: extract virCgroupV1ValidatePlacement (rhbz#1689297)
+- vircgroup: extract virCgroupV1StealPlacement (rhbz#1689297)
+- vircgroup: extract virCgroupV1DetectControllers (rhbz#1689297)
+- vircgroup: extract virCgroupV1HasController (rhbz#1689297)
+- vircgroup: extract virCgroupV1GetAnyController (rhbz#1689297)
+- vircgroup: extract virCgroupV1PathOfController (rhbz#1689297)
+- vircgroup: extract virCgroupV1MakeGroup (rhbz#1689297)
+- vircgroup: extract virCgroupV1Remove (rhbz#1689297)
+- vircgroup: extract virCgroupV1AddTask (rhbz#1689297)
+- vircgroup: extract virCgroupV1HasEmptyTasks (rhbz#1689297)
+- vircgroup: extract virCgroupV1BindMount (rhbz#1689297)
+- vircgroup: extract virCgroupV1SetOwner (rhbz#1689297)
+- vircgroup: extract virCgroupV1(Set|Get)BlkioWeight (rhbz#1689297)
+- vircgroup: extract virCgroupV1GetBlkioIoServiced (rhbz#1689297)
+- vircgroup: extract virCgroupV1GetBlkioIoDeviceServiced (rhbz#1689297)
+- vircgroup: extract virCgroupV1(Set|Get)BlkioDeviceWeight (rhbz#1689297)
+- vircgroup: extract virCgroupV1(Set|Get)BlkioDeviceReadIops (rhbz#1689297)
+- vircgroup: extract virCgroupV1(Set|Get)BlkioDeviceWriteIops (rhbz#1689297)
+- vircgroup: extract virCgroupV1(Set|Get)BlkioDeviceReadBps (rhbz#1689297)
+- vircgroup: extract virCgroupV1(Set|Get)BlkioDeviceWriteBps (rhbz#1689297)
+- vircgroup: extract virCgroupV1SetMemory (rhbz#1689297)
+- vircgroup: extract virCgroupV1GetMemoryStat (rhbz#1689297)
+- vircgroup: extract virCgroupV1GetMemoryUsage (rhbz#1689297)
+- vircgroup: extract virCgroupV1(Set|Get)Memory*Limit (rhbz#1689297)
+- vircgroup: extract virCgroupV1GetMemSwapUsage (rhbz#1689297)
+- vircgroup: extract virCgroupV1(Allow|Deny)Device (rhbz#1689297)
+- vircgroup: extract virCgroupV1(Allow|Deny)AllDevices (rhbz#1689297)
+- vircgroup: extract virCgroupV1(Set|Get)CpuShares (rhbz#1689297)
+- vircgroup: extract virCgroupV1(Set|Get)CpuCfsPeriod (rhbz#1689297)
+- vircgroup: extract virCgroupV1(Set|Get)CpuCfsQuota (rhbz#1689297)
+- vircgroup: extract virCgroupV1SupportsCpuBW (rhbz#1689297)
+- vircgroup: extract virCgroupV1GetCpuacct*Usage (rhbz#1689297)
+- vircgroup: extract virCgroupV1GetCpuacctStat (rhbz#1689297)
+- vircgroup: extract virCgroupV1(Set|Get)FreezerState (rhbz#1689297)
+- vircgroup: extract virCgroupV1(Set|Get)CpusetMems (rhbz#1689297)
+- vircgroup: extract virCgroupV1(Set|Get)CpusetMemoryMigrate (rhbz#1689297)
+- vircgroup: extract virCgroupV1(Set|Get)CpusetCpus (rhbz#1689297)
+- vircgroup: rename virCgroupController into virCgroupV1Controller (rhbz#1689297)
+- vircgroup: rename controllers to legacy (rhbz#1689297)
+- vircgroup: remove VIR_CGROUP_SUPPORTED (rhbz#1689297)
+- vircgroup: include system headers only on linux (rhbz#1689297)
+- vircgroupv1: fix build on non-linux OSes (rhbz#1689297)
+- Revert "vircgroup: cleanup controllers not managed by systemd on error" (rhbz#1689297)
+- util: introduce cgroup v2 files (rhbz#1689297)
+- vircgroup: introduce virCgroupV2Available (rhbz#1689297)
+- vircgroup: introduce virCgroupV2ValidateMachineGroup (rhbz#1689297)
+- vircgroup: introduce virCgroupV2CopyMounts (rhbz#1689297)
+- vircgroup: introduce virCgroupV2CopyPlacement (rhbz#1689297)
+- vircgroup: introduce virCgroupV2DetectMounts (rhbz#1689297)
+- vircgroup: introduce virCgroupV2DetectPlacement (rhbz#1689297)
+- vircgroup: introduce virCgroupV2ValidatePlacement (rhbz#1689297)
+- vircgroup: introduce virCgroupV2StealPlacement (rhbz#1689297)
+- vircgroup: introduce virCgroupV2DetectControllers (rhbz#1689297)
+- vircgroup: introduce virCgroupV2HasController (rhbz#1689297)
+- vircgroup: introduce virCgroupV2GetAnyController (rhbz#1689297)
+- vircgroup: introduce virCgroupV2PathOfController (rhbz#1689297)
+- vircgroup: introduce virCgroupV2MakeGroup (rhbz#1689297)
+- vircgroup: introduce virCgroupV2Remove (rhbz#1689297)
+- vircgroup: introduce virCgroupV2AddTask (rhbz#1689297)
+- vircgroup: introduce virCgroupV2HasEmptyTasks (rhbz#1689297)
+- vircgroup: introduce virCgroupV2BindMount (rhbz#1689297)
+- vircgroup: introduce virCgroupV2SetOwner (rhbz#1689297)
+- vircgroup: introduce virCgroupV2(Set|Get)BlkioWeight (rhbz#1689297)
+- vircgroup: introduce virCgroupV2GetBlkioIoServiced (rhbz#1689297)
+- vircgroup: introduce virCgroupV2GetBlkioIoDeviceServiced (rhbz#1689297)
+- vircgroup: introduce virCgroupV2(Set|Get)BlkioDeviceWeight (rhbz#1689297)
+- vircgroup: introduce virCgroupV2(Set|Get)BlkioDeviceReadIops (rhbz#1689297)
+- vircgroup: introduce virCgroupV2(Set|Get)BlkioDeviceWriteIops (rhbz#1689297)
+- vircgroup: introduce virCgroupV2(Set|Get)BlkioDeviceReadBps (rhbz#1689297)
+- vircgroup: introduce virCgroupV2(Set|Get)BlkioDeviceWriteBps (rhbz#1689297)
+- vircgroup: introduce virCgroupV2SetMemory (rhbz#1689297)
+- vircgroup: introduce virCgroupV2GetMemoryStat (rhbz#1689297)
+- vircgroup: introduce virCgroupV2GetMemoryUsage (rhbz#1689297)
+- vircgroup: introduce virCgroupV2(Set|Get)MemoryHardLimit (rhbz#1689297)
+- vircgroup: introduce virCgroupV2(Set|Get)MemorySoftLimit (rhbz#1689297)
+- vircgroup: introduce virCgroupV2(Set|Get)MemSwapHardLimit (rhbz#1689297)
+- vircgroup: introduce virCgroupV2GetMemSwapUsage (rhbz#1689297)
+- vircgroup: introduce virCgroupV2(Set|Get)CpuShares (rhbz#1689297)
+- vircgroup: introduce virCgroupV2(Set|Get)CpuCfsPeriod (rhbz#1689297)
+- vircgroup: introduce virCgroupV2(Set|Get)CpuCfsQuota (rhbz#1689297)
+- vircgroup: introduce virCgroupV2SupportsCpuBW (rhbz#1689297)
+- vircgroup: introduce virCgroupV2GetCpuacctUsage (rhbz#1689297)
+- vircgroup: introduce virCgroupV2GetCpuacctStat (rhbz#1689297)
+- vircgroup: register cgroup v2 backend (rhbz#1689297)
+- vircgroup: add support for hybrid configuration (rhbz#1689297)
+- vircgroupmock: change cgroup prefix (rhbz#1689297)
+- vircgroupmock: add support to test cgroup v2 (rhbz#1689297)
+- vircgrouptest: introduce initFakeFS and cleanupFakeFS helpers (rhbz#1689297)
+- vircgrouptest: prepare testCgroupDetectMounts for cgroup v2 (rhbz#1689297)
+- vircgrouptest: add detect mounts test for cgroup v2 (rhbz#1689297)
+- vircgrouptest: add detect mounts test for hybrid cgroups (rhbz#1689297)
+- vircgrouptest: prepare validateCgroup for cgroupv2 (rhbz#1689297)
+- vircgrouptest: add cgroup v2 tests (rhbz#1689297)
+- vircgrouptest: add hybrid tests (rhbz#1689297)
+- virt-host-validate: rewrite cgroup detection to use util/vircgroup (rhbz#1689297)
+- virt-host-validate: require freezer for LXC (rhbz#1689297)
+- virt-host-validate: Fix build on non-Linux (rhbz#1689297)
+- tests: Use correct function name in error path (rhbz#1689297)
+- util: Fix virCgroupGetMemoryStat (rhbz#1689297)
+- tests: Augment vcgrouptest to add virCgroupGetMemoryStat (rhbz#1689297)
+- vircgroup: introduce virCgroupKillRecursiveCB (rhbz#1689297)
+- vircgroupv2: fix virCgroupV2ValidateMachineGroup (rhbz#1689297)
+- util: implement virCgroupV2(Set|Get)CpusetMems (rhbz#1689297)
+- util: implement virCgroupV2(Set|Get)CpusetMemoryMigrate (rhbz#1689297)
+- util: implement virCgroupV2(Set|Get)CpusetCpus (rhbz#1689297)
+- util: enable cgroups v2 cpuset controller for threads (rhbz#1689297)
+- util: vircgroup: pass parent cgroup into virCgroupDetectControllersCB (rhbz#1689297)
+- internal: introduce a family of NULLSTR macros (rhbz#1689297)
+- util: vircgroup: improve controller detection (rhbz#1689297)
+- util: vircgroupv2: use any controller to create thread directory (rhbz#1689297)
+- util: vircgroupv2: enable CPU controller only if it's available (rhbz#1689297)
+- util: vircgroupv2: separate return values of virCgroupV2EnableController (rhbz#1689297)
+- util: vircgroupv2: don't error out if enabling controller fails (rhbz#1689297)
+- util: vircgroupv2: mark only requested controllers as available (rhbz#1689297)
+- Revert "util: vircgroup: pass parent cgroup into virCgroupDetectControllersCB" (rhbz#1689297)
+- util: vircgroupv2: stop enabling missing controllers with systemd (rhbz#1689297)
+
+* Fri Jun 28 2019 Danilo de Paula <ddepaula@redhat.com> - 4.5.0-28
+- Rebuild all virt packages to fix RHEL's upgrade path
+- Resolves: rhbz#1695587
+  (Ensure modular RPM upgrade path)
+
+* Fri Jun 21 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-27
+- RHEL: spec: Disable gluster on i686 (rhbz#1722668)
+- rpc: virnetlibsshsession: update deprecated functions (rhbz#1722735)
+
+* Thu Jun 20 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-26
+- api: disallow virDomainSaveImageGetXMLDesc on read-only connections (CVE-2019-10161)
+- api: disallow virDomainManagedSaveDefineXML on read-only connections (CVE-2019-10166)
+- api: disallow virConnectGetDomainCapabilities on read-only connections (CVE-2019-10167)
+- api: disallow virConnect*HypervisorCPU on read-only connections (CVE-2019-10168)
+
+* Fri Jun 14 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-25
+- admin: reject clients unless their UID matches the current UID (CVE-2019-10132)
+- locking: restrict sockets to mode 0600 (CVE-2019-10132)
+- logging: restrict sockets to mode 0600 (CVE-2019-10132)
+- util: skip RDMA detection for non-PCI network devices (rhbz#1693299)
+- virfile: Detect ceph as shared FS (rhbz#1698133)
+- virfile: added GPFS as shared fs (rhbz#1698133)
+- util: bitmap: define cleanup function using VIR_DEFINE_AUTOPTR_FUNC (rhbz#1716943)
+- qemu: Rework setting process affinity (rhbz#1716943)
+- qemu: Set up EMULATOR thread and cpuset.mems before exec()-ing qemu (rhbz#1716943)
+- conf: Add definitions for 'uid' and 'fid' PCI address attributes (rhbz#1508149)
+- qemu: Introduce zPCI capability (rhbz#1508149)
+- qemu: Enable PCI multi bus for S390 guests (rhbz#1508149)
+- conf: Introduce extension flag and zPCI member for PCI address (rhbz#1508149)
+- conf: Introduce address caching for PCI extensions (rhbz#1508149)
+- qemu: Auto add pci-root for s390/s390x guests (rhbz#1508149)
+- conf: use virXMLFormatElement() in virDomainDeviceInfoFormat() (rhbz#1508149)
+- conf: Introduce parser, formatter for uid and fid (rhbz#1508149)
+- qemu: Add zPCI address definition check (rhbz#1508149)
+- conf: Allocate/release 'uid' and 'fid' in PCI address (rhbz#1508149)
+- qemu: Generate and use zPCI device in QEMU command line (rhbz#1508149)
+- qemu: Add hotpluging support for PCI devices on S390 guests (rhbz#1508149)
+- qemuDomainRemoveRNGDevice: Remove associated chardev too (rhbz#1508149)
+- qemu_hotplug: remove erroneous call to qemuDomainDetachExtensionDevice() (rhbz#1508149)
+- qemu_hotplug: remove another erroneous qemuDomainDetachExtensionDevice() call (rhbz#1508149)
+- util: Propagate numad failures correctly (rhbz#1716907)
+- util: Introduce virBitmapUnion() (rhbz#1716908)
+- util: Introduce virNumaNodesetToCPUset() (rhbz#1716908)
+- qemu: Fix qemuProcessInitCpuAffinity() (rhbz#1716908)
+- qemu: Fix leak in qemuProcessInitCpuAffinity() (rhbz#1716908)
+- qemu: Drop cleanup label from qemuProcessInitCpuAffinity() (rhbz#1716908)
+- qemu: Fix NULL pointer access in qemuProcessInitCpuAffinity() (rhbz#1716908)
+- qemuBuildMemoryBackendProps: Pass @priv instead of its individual members (rhbz#1624223)
+- qemu: Don't use -mem-prealloc among with .prealloc=yes (rhbz#1624223)
+- nwfilter: fix adding std MAC and IP values to filter binding (rhbz#1691356)
+- qemuProcessBuildDestroyMemoryPathsImpl: Don't overwrite error (rhbz#1658112)
+- qemu_security: Fully implement qemuSecurityDomainSetPathLabel (rhbz#1658112)
+- qemu: process: SEV: Assume libDir to be the directory to create files in (rhbz#1658112)
+- qemu: process: SEV: Relabel guest owner's SEV files created before start (rhbz#1658112)
+
+* Tue May 14 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-24
+- tests: qemuxml2argv: add CAPS_ARCH_LATEST macro (rhbz#1698855)
+- qemu: Add ccw support for vhost-vsock (rhbz#1698855)
+- qemu: Allow creating ppc64 guests with graphics and no USB mouse (rhbz#1683681)
+- conf: Expose virDomainSCSIDriveAddressIsUsed (rhbz#1692354)
+- qemuhotplugtest: Don't plug a SCSI disk at unit 7 (rhbz#1692354)
+- qemu_hotplug: Check for duplicate drive addresses (rhbz#1692354)
+- cpu_map: Add support for cldemote CPU feature (rhbz#1537731)
+- util: alloc: add macros for implementing automatic cleanup functionality (rhbz#1505998)
+- qemu: domain: Simplify non-VFIO memLockLimit calculation for PPC64 (rhbz#1505998)
+- qemu_domain: add a PPC64 memLockLimit helper (rhbz#1505998)
+- qemu_domain: NVLink2 bridge detection function for PPC64 (rhbz#1505998)
+- PPC64 support for NVIDIA V100 GPU with NVLink2 passthrough (rhbz#1505998)
+- cpu_x86: Do not cache microcode version (CVE-2018-12127, CVE-2019-11091, CVE-2018-12126, CVE-2018-12130)
+- qemu: Don't cache microcode version (CVE-2018-12127, CVE-2019-11091, CVE-2018-12126, CVE-2018-12130)
+- cputest: Add data for Intel(R) Xeon(R) CPU E3-1225 v5 (CVE-2018-12127, CVE-2019-11091, CVE-2018-12126, CVE-2018-12130)
+- cpu_map: Define md-clear CPUID bit (CVE-2018-12127, CVE-2019-11091, CVE-2018-12126, CVE-2018-12130)
+
+* Fri Feb 15 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-23
+- network: explicitly allow icmp/icmpv6 in libvirt zonefile (rhbz#1650320)
+
+* Fri Feb 15 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-22
+- util: fix memory leak in virFirewallDInterfaceSetZone() (rhbz#1650320)
+
+* Fri Feb  8 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-21
+- docs: Drop /dev/net/tun from the list of shared devices (rhbz#1665400)
+- qemu: conf: Remove /dev/sev from the default cgroup device acl list (rhbz#1665400)
+- qemu: cgroup: Expose /dev/sev/ only to domains that require SEV (rhbz#1665400)
+- qemu: domain: Add /dev/sev into the domain mount namespace selectively (rhbz#1665400)
+- security: dac: Relabel /dev/sev in the namespace (rhbz#1665400)
+- qemu: caps: Use CAP_DAC_OVERRIDE for probing to avoid permission issues (rhbz#1665400)
+- qemu: caps: Don't try to ask for CAP_DAC_OVERRIDE if non-root (rhbz#1665400)
+- Revert "RHEL: Require firewalld-filesystem for firewalld rpm macros" (rhbz#1650320)
+- Revert "RHEL: network: regain guest network connectivity after firewalld switch to nftables" (rhbz#1650320)
+- configure: change HAVE_FIREWALLD to WITH_FIREWALLD (rhbz#1650320)
+- util: move all firewalld-specific stuff into its own files (rhbz#1650320)
+- util: new virFirewallD APIs + docs (rhbz#1650320)
+- configure: selectively install a firewalld 'libvirt' zone (rhbz#1650320)
+- network: set firewalld zone of bridges to "libvirt" zone when appropriate (rhbz#1650320)
+- network: allow configuring firewalld zone for virtual network bridge device (rhbz#1650320)
+- util: remove test code accidentally committed to virFirewallDZoneExists (rhbz#1650320)
+- qemu: command: Don't skip 'readonly' and throttling info for empty drive (rhbz#1670337)
+
+* Mon Jan 28 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-20
+- RHEL: qemu: Fix crash trying to use iSCSI hostdev (rhbz#1669424)
+
+* Thu Jan 24 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-19
+- qemu: Fix logic error in qemuSetUnprivSGIO (rhbz#1666605)
+- tests: qemuxml2argv: Add test case for empty CDROM with cache mode (rhbz#1553255)
+- qemu: command: Don't format image properties for empty -drive (rhbz#1553255)
+
+* Mon Jan 14 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-18
+- conf: correct false boot order error during domain parse (rhbz#1630393)
+- qemu: Remove duplicated qemuAgentCheckError (rhbz#1665000)
+- qemu: require reply from guest agent in qemuAgentGetInterfaces (rhbz#1665000)
+- qemu: Filter non SCSI hostdevs in qemuHostdevPrepareSCSIDevices (rhbz#1665244)
+- util: remove const specifier from nlmsghdr arg to virNetlinkDumpCallback() (rhbz#1583131)
+- util: add a function to insert new interfaces to IPv6CheckForwarding list (rhbz#1583131)
+- util: use nlmsg_find_attr() instead of an open-coded loop (rhbz#1583131)
+- util: check accept_ra for all nexthop interfaces of multipath routes (rhbz#1583131)
+- util: make forgotten changes suggested during review of commit d40b820c (rhbz#1583131)
+
+* Mon Jan  7 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-17
+- virsh: Strip XML declaration when extracting CPU XMLs (rhbz#1659048)
+- RHEL: qemu: Add ability to set sgio values for hostdev (rhbz#1582424)
+- RHEL: qemu: Add check for unpriv sgio for SCSI generic host device (rhbz#1582424)
+- qemu: Alter @val usage in qemuSetUnprivSGIO (rhbz#1656362)
+- qemu: Alter qemuSetUnprivSGIO hostdev shareable logic (rhbz#1656362)
+
+* Mon Dec 17 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-16
+- util: Don't overflow in virRandomBits (rhbz#1655586)
+- virrandom: Avoid undefined behaviour in virRandomBits (rhbz#1655586)
+- spec: remove libcgroup and cgconfig (rhbz#1602407)
+- qemu: Drop duplicated code from qemuDomainDefValidateFeatures() (rhbz#1647822)
+- tests: Add capabilities data for QEMU 3.1.0 on ppc64 (rhbz#1647822)
+- qemu: Introduce QEMU_CAPS_MACHINE_PSERIES_CAP_NESTED_HV (rhbz#1647822)
+- conf: Parse and format nested-hv feature (rhbz#1647822)
+- qemu: Format nested-hv feature on the command line (rhbz#1647822)
+- qemu: Add check for whether KVM nesting is enabled (rhbz#1645139)
+- secret: Add check/validation for correct usage when LookupByUUID (rhbz#1656255)
+- cpu: Add support for "stibp" x86_64 feature (rhbz#1655032)
+
+* Mon Dec  3 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-15
+- virfile: Take symlink into account in virFileIsSharedFixFUSE (rhbz#1634782)
+- qemu: Ignore nwfilter binding instantiation issues during reconnect (rhbz#1648544)
+- qemu: Set identity for the reconnect all thread (rhbz#1648546)
+- Revert "access: Modify the VIR_ERR_ACCESS_DENIED to include driverName" (rhbz#1631608)
+- access: Modify the VIR_ERR_ACCESS_DENIED to include driverName (rhbz#1631608)
+- qemu: add vfio-ap capability (rhbz#1508146)
+- qemu: vfio-ap device support (rhbz#1508146)
+- qemu: Extract MDEV VFIO PCI validation code into a separate helper (rhbz#1508146)
+- conf: Move VFIO AP validation from post parse to QEMU validation code (rhbz#1508146)
+- qemu: Fix post-copy migration on the source (rhbz#1649169)
+
+* Fri Nov  9 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-14
+- storage: Remove secretPath from _virStorageBackendQemuImgInfo (rhbz#1645459)
+- storage: Allow for inputvol to have any format for encryption (rhbz#1645459)
+- storage: Allow inputvol to be encrypted (rhbz#1645459)
+- access: Modify the VIR_ERR_ACCESS_DENIED to include driverName (rhbz#1631608)
+- docs: Enhance polkit documentation to describe secondary connection (rhbz#1631608)
+- qemu: Don't ignore resume events (rhbz#1634758, rhbz#1643338)
+
+* Thu Nov  1 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-13
+- Revert "spec: Temporarily drop gluster support" (rhbz#1599339)
+
+* Wed Oct 17 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-12
+- RHEL: Require firewalld-filesystem for firewalld rpm macros (rhbz#1639932)
+
+* Tue Oct 16 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-11
+- virfile: fix cast-align error (rhbz#1634782)
+- virfiletest: Fix test name prefix for virFileInData test (rhbz#1634782)
+- virfiletst: Test virFileIsSharedFS (rhbz#1634782)
+- virFileIsSharedFSType: Detect direct mount points (rhbz#1634782)
+- virfile: Rework virFileIsSharedFixFUSE (rhbz#1634782)
+- RHEL: network: regain guest network connectivity after firewalld switch to nftables (rhbz#1638864)
+
+* Mon Oct  8 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-10
+- conf: Fix check for chardev source path (rhbz#1609723)
+- tests: Reuse qemucapabilities data for qemucaps2xml (rhbz#1629862)
+- tests: Add more tests to qemucaps2xml (rhbz#1629862)
+- qemu: Drop QEMU_CAPS_ENABLE_KVM (rhbz#1629862)
+- qemu: Avoid probing non-native binaries all the time (rhbz#1629862)
+- qemu: Clarify QEMU_CAPS_KVM (rhbz#1629862)
+- qemu: Don't check for /dev/kvm presence (rhbz#1629862)
+- tests: Follow up on qemucaps2xmldata rename (rhbz#1629862)
+- security: dac: also label listen UNIX sockets (rhbz#1634775)
+- spec: Set correct TLS priority (rhbz#1632269)
+- spec: Build ceph and gluster support everywhere (rhbz#1599546)
+- virsh: Require explicit --domain for domxml-to-native (rhbz#1634769)
+- virFileIsSharedFSType: Check for fuse.glusterfs too (rhbz#1634782)
+- qemu: fix up permissions for pre-created UNIX sockets (rhbz#1634775)
+- cpu_map: Add features for Icelake CPUs (rhbz#1527657, rhbz#1526625)
+- cpu_map: Add Icelake CPU models (rhbz#1526625)
+- qemu: Properly report VIR_DOMAIN_EVENT_RESUMED_FROM_SNAPSHOT (rhbz#1634758)
+- qemu: Report more appropriate running reasons (rhbz#1634758)
+- qemu: Pass running reason to RESUME event handler (rhbz#1634758)
+- qemu: Map running reason to resume event detail (rhbz#1634758)
+- qemu: Avoid duplicate resume events and state changes (rhbz#1634758)
+- conf: qemu: add support for Hyper-V frequency MSRs (rhbz#1589702)
+- conf: qemu: add support for Hyper-V reenlightenment notifications (rhbz#1589702)
+- conf: qemu: add support for Hyper-V PV TLB flush (rhbz#1589702)
+
+* Wed Sep  5 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-9
+- RHEL: Fix virConnectGetMaxVcpus output (rhbz#1582222)
+- storage: Add --shrink to qemu-img command when shrinking vol (rhbz#1622534)
+- access: Fix nwfilter-binding ACL access API name generation (rhbz#1622540)
+- conf: Add validation of input devices (rhbz#1591240)
+- tests: qemu: Remove disk from graphics-vnc-tls (rhbz#1598167)
+- tests: qemu: test more versions for graphics-vnc-tls (rhbz#1598167)
+- qemu: vnc: switch to tls-creds-x509 (rhbz#1598167)
+- qemu: mdev: Use vfio-pci 'display' property only with vfio-pci mdevs (rhbz#1624740)
+- virDomainDefCompatibleDevice: Relax alias change check (rhbz#1603133)
+- virDomainDetachDeviceFlags: Clarify update semantics (rhbz#1603133)
+- virDomainNetDefCheckABIStability: Check for MTU change too (rhbz#1623158)
+- RHEL: spec: Require python3-devel on RHEL-8 (rhbz#1518446)
+- qemu: monitor: Remove qemuMonitorJSONExtractCPUArchInfo wrapper (rhbz#1598829)
+- qemu: monitor: Use 'target' instead of 'arch' in reply of 'query-cpus-fast' (rhbz#1598829)
+
+* Tue Aug 21 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-8
+- tests: Add missing thread_siblings_list files (rhbz#1608479)
+- util: Rewrite virHostCPUCountThreadSiblings() (rhbz#1608479)
+- utils: Remove arbitrary limit on socket_id/core_id (rhbz#1608479)
+- tests: Add linux-high-ids test (rhbz#1608479)
+- qemu: hotplug: Fix asynchronous unplug of 'shmem' (rhbz#1618680)
+- tests: rename hugepages to hugepages-default (rhbz#1615461)
+- tests: extract hugepages-numa-default-dimm out of hugepages-numa (rhbz#1615461)
+- tests: rename hugepages-numa into hugepages-numa-default (rhbz#1615461)
+- tests: remove unnecessary XML elements from hugepages-numa-default (rhbz#1615461)
+- tests: extract pages-discard out of hugepages-pages (rhbz#1615461)
+- tests: rename hugepages-pages into hugepages-numa-nodeset (rhbz#1615461)
+- tests: rename hugepages-pages2 into hugepages-numa-default-2M (rhbz#1615461)
+- tests: extract pages-discard-hugepages out of hugepages-pages3 (rhbz#1615461)
+- tests: rename hugepages-pages3 into hugepages-numa-nodeset-part (rhbz#1615461)
+- tests: rename hugepages-pages4 into hugepages-numa-nodeset-nonexist (rhbz#1615461)
+- tests: rename hugepages-pages5 into hugepages-default-2M (rhbz#1615461)
+- tests: rename hugepages-pages6 into hugepages-default-system-size (rhbz#1615461)
+- tests: rename hugepages-pages7 into pages-dimm-discard (rhbz#1615461)
+- tests: rename hugepages-pages8 into hugepages-nodeset-nonexist (rhbz#1615461)
+- tests: introduce hugepages-default-1G-nodeset-2M (rhbz#1615461)
+- tests: introduce hugepages-nodeset (rhbz#1615461)
+- conf: Move hugepage XML validation check out of qemu_command (rhbz#1615461)
+- conf: Move hugepages validation out of XML parser (rhbz#1615461)
+- conf: Introduce virDomainDefPostParseMemtune (rhbz#1615461)
+- tests: sev: Test launch-security with specific QEMU version (rhbz#1619150)
+- qemu: Fix probing of AMD SEV support (rhbz#1619150)
+- qemu: caps: Format SEV platform data into qemuCaps cache (rhbz#1619150)
+- conf: Parse guestfwd channel device info again (rhbz#1610072)
+
+* Thu Aug 16 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-7
+- qemu_migration: Avoid writing to freed memory (rhbz#1615854)
+
+* Thu Aug  2 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-6
+- qemu: Exempt video model 'none' from getting a PCI address on Q35
+- conf: Fix a error msg typo in virDomainVideoDefValidate
+
+* Tue Jul 31 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-5
+- esx storage: Fix typo lsilogic -> lsiLogic
+- networkGetDHCPLeases: Don't always report error if unable to read leases file
+- nwfilter: Resolve SEGV for NWFilter Snoop processing
+- qemu: Remove unused bypassSecurityDriver from qemuOpenFileAs
+- qemuDomainSaveMemory: Don't enforce dynamicOwnership
+- domain_nwfilter: Return early if net has no name in virDomainConfNWFilterTeardownImpl
+- examples: Add clean-traffic-gateway into nwfilters
+
+* Mon Jul 23 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-4
+- qemu: hotplug: don't overwrite error message in qemuDomainAttachNetDevice
+- qemu: hotplug: report error when changing rom enabled attr for net iface
+- qemu: Fix setting global_period cputune element
+- tests: qemucaps: Add test data for upcoming qemu 3.0.0
+- qemu: capabilities: Add capability for werror/rerror for 'usb-device' frontend
+- qemu: command: Move graphics iteration to its own function
+- qemu: address: Handle all the video devices within a single loop
+- conf: Introduce virDomainVideoDefClear helper
+- conf: Introduce virDomainDefPostParseVideo helper
+- qemu: validate: Enforce compile time switch type checking for videos
+- tests: Add capabilities data for QEMU 2.11 x86_64
+- tests: Update capabilities data for QEMU 3.0.0 x86_64
+- qemu: qemuBuildHostdevCommandLine: Use a helper variable mdevsrc
+- qemu: caps: Introduce a capability for egl-headless
+- qemu: Introduce a new graphics display type 'headless'
+- qemu: caps: Add vfio-pci.display capability
+- conf: Introduce virDomainGraphicsDefHasOpenGL helper
+- conf: Replace 'error' with 'cleanup' in virDomainHostdevDefParseXMLSubsys
+- conf: Introduce new <hostdev> attribute 'display'
+- qemu: command: Enable formatting vfio-pci.display option onto cmdline
+- docs: Rephrase the mediated devices hostdev section a bit
+- conf: Introduce new video type 'none'
+- virt-xml-validate: Add schema for nwfilterbinding
+- tools: Fix typo generating adapter_wwpn field
+- src: Fix memory leak in virNWFilterBindingDispose
+
+* Mon Jul 23 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-3
+- qemu: hotplug: Do not try to add secret object for TLS if it does not exist
+- qemu: monitor: Make qemuMonitorAddObject more robust against programming errors
+- spec: Explicitly require matching libvirt-libs
+- virDomainConfNWFilterInstantiate: initialize @xml to avoid random crash
+- qemuProcessStartPRDaemonHook: Try to set NS iff domain was started with one
+- qemuDomainValidateStorageSource: Relax PR validation
+- virStoragePRDefFormat: Suppress path formatting for migratable XML
+- qemu: Wire up PR_MANAGER_STATUS_CHANGED event
+- qemu_monitor: Introduce qemuMonitorJSONGetPRManagerInfo
+- qemu: Fetch pr-helper process info on reconnect
+- qemu: Fix ATTRIBUTE_NONNULL for qemuMonitorAddObject
+- virsh.pod: Fix a command name typo in nwfilter-binding-undefine
+- docs: schema: Add missing <alias> to vsock device
+- virnetdevtap: Don't crash on !ifname in virNetDevTapInterfaceStats
+- tests: fix TLS handshake failure with TLS 1.3
+
+* Mon Jul  9 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-2
+- qemu: Add capability for the HTM pSeries feature
+- conf: Parse and format the HTM pSeries feature
+- qemu: Format the HTM pSeries feature
+- qemu: hotplug: Don't access srcPriv when it's not allocated
+- qemuDomainNestedJobAllowed: Allow QEMU_JOB_NONE
+- src: Mention DEVICE_REMOVAL_FAILED event in virDomainDetachDeviceAlias docs
+- virsh.pod: Drop --persistent for detach-device-alias
+- qemu: don't use chardev FD passing with standalone args
+- qemu: remove chardevStdioLogd param from vhostuser code path
+- qemu: consolidate parameters of qemuBuildChrChardevStr into flags
+- qemu: don't use chardev FD passing for vhostuser backend
+- qemu: fix UNIX socket chardevs operating in client mode
+- qemuDomainDeviceDefValidateNetwork: Check for range only if IP prefix set
+- spec: Temporarily drop gluster support
+
+* Tue Jul  3 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-1
+- Rebased to libvirt-4.5.0
+
+* Fri May 25 2018 Jiri Denemark <jdenemar@redhat.com> - 4.3.0-1
+- Rebased to libvirt-4.3.0
+
+* Wed Mar 21 2018 Daniel P. Berrangé <berrange@redhat.com> - 4.1.0-2
+- Fix systemd macro argument with line continuations (rhbz#1558648)
+
+* Mon Mar  5 2018 Daniel Berrange <berrange@redhat.com> - 4.1.0-1
+- Rebase to version 4.1.0
+
+* Wed Feb 07 2018 Fedora Release Engineering <releng@fedoraproject.org> - 4.0.0-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild
+
+* Fri Jan 19 2018 Daniel P. Berrange <berrange@redhat.com> - 4.0.0-1
+- Rebase to version 4.0.0
+
+* Wed Dec 20 2017 Cole Robinson <crobinso@redhat.com> - 3.10.0-2
+- Rebuild for xen 4.10
+
+* Tue Dec  5 2017 Daniel P. Berrange <berrange@redhat.com> - 3.10.0-1
+- Rebase to version 3.10.0
+
+* Fri Nov  3 2017 Daniel P. Berrange <berrange@redhat.com> - 3.9.0-1
+- Rebase to version 3.9.0
+
+* Wed Oct  4 2017 Daniel P. Berrange <berrange@redhat.com> - 3.8.0-1
+- Rebase to version 3.8.0
+
+* Mon Sep  4 2017 Daniel P. Berrange <berrange@redhat.com> - 3.7.0-1
+- Rebase to version 3.7.0
+
+* Wed Aug  2 2017 Daniel P. Berrange <berrange@redhat.com> - 3.6.0-1
+- Rebase to version 3.6.0
+
+* Sun Jul 30 2017 Florian Weimer <fweimer@redhat.com> - 3.5.0-4
+- Rebuild with binutils fix for ppc64le (#1475636)
+
+* Tue Jul 25 2017 Daniel P. Berrange <berrange@redhat.com> - 3.5.0-3
+- Disabled RBD on i386, arm, ppc64 (rhbz #1474743)
+
+* Mon Jul 17 2017 Cole Robinson <crobinso@redhat.com> - 3.5.0-2
+- Rebuild for xen 4.9
+
+* Thu Jul  6 2017 Daniel P. Berrange <berrange@redhat.com> - 3.5.0-1
+- Rebase to version 3.5.0
+
+* Fri Jun  2 2017 Daniel P. Berrange <berrange@redhat.com> - 3.4.0-1
+- Rebase to version 3.4.0
+
+* Mon May  8 2017 Daniel P. Berrange <berrange@redhat.com> - 3.3.0-1
+- Rebase to version 3.3.0
+
+* Mon Apr  3 2017 Daniel P. Berrange <berrange@redhat.com> - 3.2.0-1
+- Rebase to version 3.2.0
+
+* Fri Mar  3 2017 Daniel P. Berrange <berrange@redhat.com> - 3.1.0-1
+- Rebase to version 3.1.0
+
+* Fri Feb 10 2017 Fedora Release Engineering <releng@fedoraproject.org> - 3.0.0-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild
+
+* Thu Jan 19 2017 Daniel P. Berrange <berrange@redhat.com> - 3.0.0-1
+- Rebase to version 3.0.0