diff options
Diffstat (limited to 'libvirt.spec')
| -rw-r--r-- | libvirt.spec | 3009 |
1 files changed, 3009 insertions, 0 deletions
diff --git a/libvirt.spec b/libvirt.spec new file mode 100644 index 0000000..c938168 --- /dev/null +++ b/libvirt.spec @@ -0,0 +1,3009 @@ +# -*- rpm-spec -*- + +# This spec file assumes you are building on a Fedora or RHEL version +# that's still supported by the vendor. It may work on other distros +# or versions, but no effort will be made to ensure that going forward. +%define min_rhel 8 +%define min_fedora 33 + +%define arches_qemu_kvm %{ix86} x86_64 %{power64} %{arm} aarch64 s390x +%if 0%{?rhel} + %if 0%{?rhel} > 8 + %define arches_qemu_kvm x86_64 aarch64 s390x + %else + %define arches_qemu_kvm x86_64 %{power64} aarch64 s390x + %endif +%endif + +%define arches_64bit x86_64 %{power64} aarch64 s390x riscv64 +%define arches_x86 %{ix86} x86_64 + +%define arches_systemtap_64bit %{arches_64bit} +%define arches_dmidecode %{arches_x86} +%define arches_xen %{arches_x86} aarch64 +%define arches_vbox %{arches_x86} +%define arches_ceph %{arches_64bit} +%define arches_zfs %{arches_x86} %{power64} %{arm} +%define arches_numactl %{arches_x86} %{power64} aarch64 s390x +%define arches_numad %{arches_x86} %{power64} aarch64 + +# The hypervisor drivers that run in libvirtd +%define with_qemu 0%{!?_without_qemu:1} +%define with_lxc 0%{!?_without_lxc:1} +%define with_libxl 0%{!?_without_libxl:1} +%define with_vbox 0%{!?_without_vbox:1} + +%ifarch %{arches_qemu_kvm} + %define with_qemu_kvm %{with_qemu} +%else + %define with_qemu_kvm 0 +%endif + +%define with_qemu_tcg %{with_qemu} + +# RHEL disables TCG on all architectures +%if 0%{?rhel} + %define with_qemu_tcg 0 +%endif + +%if ! %{with_qemu_tcg} && ! %{with_qemu_kvm} + %define with_qemu 0 +%endif + +# Then the hypervisor drivers that run outside libvirtd, in libvirt.so +%define with_openvz 0%{!?_without_openvz:1} +%define with_vmware 0%{!?_without_vmware:1} +%define with_esx 0%{!?_without_esx:1} +%define with_hyperv 0%{!?_without_hyperv:1} + +# Then the secondary host drivers, which run inside libvirtd +%define with_storage_rbd 0%{!?_without_storage_rbd:1} +%if 0%{?fedora} + %define with_storage_sheepdog 0%{!?_without_storage_sheepdog:1} +%else + %define with_storage_sheepdog 0 +%endif + +%define with_storage_gluster 0%{!?_without_storage_gluster:1} +%if 0%{?rhel} + # Glusterfs has been dropped in RHEL-9, and before that + # was only enabled on arches where KVM exists + %if 0%{?rhel} > 8 + %define with_storage_gluster 0 + %else + %ifnarch %{arches_qemu_kvm} + %define with_storage_gluster 0 + %endif + %endif +%endif + +# Fedora has zfs-fuse +%if 0%{?fedora} + %define with_storage_zfs 0%{!?_without_storage_zfs:1} +%else + %define with_storage_zfs 0 +%endif + +%define with_storage_iscsi_direct 0%{!?_without_storage_iscsi_direct:1} +# libiscsi has been dropped in RHEL-9 +%if 0%{?rhel} > 8 + %define with_storage_iscsi_direct 0 +%endif + +# Other optional features +%define with_numactl 0%{!?_without_numactl:1} + +# A few optional bits off by default, we enable later +%define with_fuse 0 +%define with_sanlock 0 +%define with_numad 0 +%define with_firewalld_zone 0 +%define with_netcf 0 +%define with_libssh2 0 +%define with_wireshark 0 +%define with_libssh 0 +%define with_dmidecode 0 + +# Finally set the OS / architecture specific special cases + +# Architecture-dependent features +%ifnarch %{arches_xen} + %define with_libxl 0 +%endif +%ifnarch %{arches_vbox} + %define with_vbox 0 +%endif +%ifnarch %{arches_numactl} + %define with_numactl 0 +%endif +%ifnarch %{arches_zfs} + %define with_storage_zfs 0 +%endif +%ifnarch %{arches_ceph} + %define with_storage_rbd 0 +%endif + +# RHEL doesn't ship many hypervisor drivers +%if 0%{?rhel} + %define with_openvz 0 + %define with_vbox 0 + %define with_vmware 0 + %define with_libxl 0 + %define with_hyperv 0 + %define with_vz 0 + %define with_lxc 0 +%endif + +%define with_firewalld_zone 0%{!?_without_firewalld_zone:1} + +%if (0%{?fedora} && 0%{?fedora} < 34) || (0%{?rhel} && 0%{?rhel} < 9) + %define with_netcf 0%{!?_without_netcf:1} +%endif + + +# fuse is used to provide virtualized /proc for LXC +%if %{with_lxc} + %define with_fuse 0%{!?_without_fuse:1} +%endif + +# Enable sanlock library for lock management with QEMU +# Sanlock is available only on arches where kvm is available for RHEL +%if 0%{?fedora} + %define with_sanlock 0%{!?_without_sanlock:1} +%endif +%if 0%{?rhel} + %ifarch %{arches_qemu_kvm} + %define with_sanlock 0%{!?_without_sanlock:1} + %endif +%endif + +# Enable libssh2 transport for new enough distros +%if 0%{?fedora} + %define with_libssh2 0%{!?_without_libssh2:1} +%endif + +# Enable wireshark plugins for all distros +%define with_wireshark 0%{!?_without_wireshark:1} +%define wireshark_plugindir %(pkg-config --variable plugindir wireshark)/epan + +# Enable libssh transport for all distros +%define with_libssh 0%{!?_without_libssh:1} + +%if %{with_qemu} || %{with_lxc} +# numad is used to manage the CPU and memory placement dynamically, +# it's not available on many non-x86 architectures. + %ifarch %{arches_numad} + %define with_numad 0%{!?_without_numad:1} + %endif +%endif + +%ifarch %{arches_dmidecode} + %define with_dmidecode 0%{!?_without_dmidecode:1} +%endif + +%define with_modular_daemons 0 +%if 0%{?fedora} >= 35 || 0%{?rhel} >= 9 + %define with_modular_daemons 1 +%endif + +# Force QEMU to run as non-root +%define qemu_user qemu +%define qemu_group qemu + + +# RHEL releases provide stable tool chains and so it is safe to turn +# compiler warning into errors without being worried about frequent +# changes in reported warnings +%if 0%{?rhel} + %define enable_werror -Dwerror=true +%else + %define enable_werror -Dwerror=false -Dgit_werror=disabled +%endif + +%define tls_priority "@LIBVIRT,SYSTEM" + + +Summary: Library providing a simple virtualization API +Name: libvirt +Version: 7.9.0 +Release: 1%{?dist}%{?extra_release} +License: LGPLv2+ +URL: https://libvirt.org/ + +%if %(echo %{version} | grep -q "\.0$"; echo $?) == 1 + %define mainturl stable_updates/ +%endif +Source: https://libvirt.org/sources/%{?mainturl}libvirt-%{version}.tar.xz +Source1: symlinks + +Patch1: libvirt-RHEL-Hack-around-changed-Broadwell-Haswell-CPUs.patch +Patch2: libvirt-RHEL-Add-rhel-machine-types-to-qemuDomainMachineNeedsFDC.patch +Patch3: libvirt-RHEL-Fix-virConnectGetMaxVcpus-output.patch +Patch4: libvirt-RHEL-qemu-Add-ability-to-set-sgio-values-for-hostdev.patch +Patch5: libvirt-RHEL-qemu-Add-check-for-unpriv-sgio-for-SCSI-generic-host-device.patch +Patch6: libvirt-RHEL-virscsi-Check-device-type-before-getting-it-s-dev-node-name.patch +Patch7: libvirt-RHEL-virscsi-Support-TAPEs-in-virSCSIDeviceGetDevName.patch +Patch8: libvirt-RHEL-virscsi-Introduce-and-use-virSCSIDeviceGetUnprivSGIOSysfsPath.patch +Patch9: libvirt-RHEL-virutil-Accept-non-block-devices-in-virGetDeviceID.patch +Patch10: libvirt-RHEL-Enable-usage-of-x-blockdev-reopen.patch + +Requires: libvirt-daemon = %{version}-%{release} +Requires: libvirt-daemon-config-network = %{version}-%{release} +Requires: libvirt-daemon-config-nwfilter = %{version}-%{release} +%if %{with_libxl} +Requires: libvirt-daemon-driver-libxl = %{version}-%{release} +%endif +%if %{with_lxc} +Requires: libvirt-daemon-driver-lxc = %{version}-%{release} +%endif +%if %{with_qemu} +Requires: libvirt-daemon-driver-qemu = %{version}-%{release} +%endif +# We had UML driver, but we've removed it. +Obsoletes: libvirt-daemon-driver-uml <= 5.0.0 +Obsoletes: libvirt-daemon-uml <= 5.0.0 +%if %{with_vbox} +Requires: libvirt-daemon-driver-vbox = %{version}-%{release} +%endif +Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} + +Requires: libvirt-daemon-driver-interface = %{version}-%{release} +Requires: libvirt-daemon-driver-secret = %{version}-%{release} +Requires: libvirt-daemon-driver-storage = %{version}-%{release} +Requires: libvirt-daemon-driver-network = %{version}-%{release} +Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} +Requires: libvirt-client = %{version}-%{release} +Requires: libvirt-libs = %{version}-%{release} + +# All build-time requirements. Run-time requirements are +# listed against each sub-RPM +BuildRequires: python3-docutils +BuildRequires: gcc +BuildRequires: meson >= 0.54.0 +BuildRequires: ninja-build +BuildRequires: git +BuildRequires: perl-interpreter +%if 0%{?rhel} == 8 +BuildRequires: python3-devel +%else +BuildRequires: python3 +%endif +%if %{with_libxl} +BuildRequires: xen-devel +%endif +BuildRequires: glib2-devel >= 2.56 +BuildRequires: libxml2-devel +BuildRequires: libxslt +BuildRequires: readline-devel +BuildRequires: bash-completion >= 2.0 +BuildRequires: gettext +BuildRequires: libtasn1-devel +BuildRequires: gnutls-devel +BuildRequires: libattr-devel +# For pool-build probing for existing pools +BuildRequires: libblkid-devel >= 2.17 +# for augparse, optionally used in testing +BuildRequires: augeas +BuildRequires: systemd-devel >= 185 +BuildRequires: libpciaccess-devel >= 0.10.9 +BuildRequires: yajl-devel +%if %{with_sanlock} +BuildRequires: sanlock-devel >= 2.4 +%endif +BuildRequires: libpcap-devel >= 1.5.0 +BuildRequires: libnl3-devel +BuildRequires: libselinux-devel +BuildRequires: dnsmasq >= 2.41 +BuildRequires: iptables +BuildRequires: radvd +BuildRequires: ebtables +BuildRequires: module-init-tools +BuildRequires: cyrus-sasl-devel +BuildRequires: polkit >= 0.112 +# For mount/umount in FS driver +BuildRequires: util-linux +%if %{with_qemu} +# For managing ACLs +BuildRequires: libacl-devel +# From QEMU RPMs +BuildRequires: /usr/bin/qemu-img +%endif +# For LVM drivers +BuildRequires: lvm2 +# For pool type=iscsi +BuildRequires: iscsi-initiator-utils +%if %{with_storage_iscsi_direct} +# For pool type=iscsi-direct +BuildRequires: libiscsi-devel +%endif +# For disk driver +BuildRequires: parted-devel +# For Multipath support +BuildRequires: device-mapper-devel +# For XFS reflink clone support +BuildRequires: xfsprogs-devel +%if %{with_storage_rbd} +BuildRequires: librados-devel +BuildRequires: librbd-devel +%endif +%if %{with_storage_gluster} +BuildRequires: glusterfs-api-devel >= 3.4.1 +BuildRequires: glusterfs-devel >= 3.4.1 +%endif +%if %{with_storage_sheepdog} +BuildRequires: sheepdog +%endif +%if %{with_storage_zfs} +# Support any conforming implementation of zfs. On stock Fedora +# this is zfs-fuse, but could be zfsonlinux upstream RPMs +BuildRequires: /sbin/zfs +BuildRequires: /sbin/zpool +%endif +%if %{with_numactl} +# For QEMU/LXC numa info +BuildRequires: numactl-devel +%endif +BuildRequires: libcap-ng-devel >= 0.5.0 +%if %{with_fuse} +BuildRequires: fuse-devel >= 2.8.6 +%endif +%if %{with_libssh2} +BuildRequires: libssh2-devel >= 1.3.0 +%endif +%if %{with_netcf} +BuildRequires: netcf-devel >= 0.2.2 +%endif +%if %{with_esx} +BuildRequires: libcurl-devel +%endif +%if %{with_hyperv} +BuildRequires: libwsman-devel >= 2.6.3 +%endif +BuildRequires: audit-libs-devel +# we need /usr/sbin/dtrace +BuildRequires: systemtap-sdt-devel + +# For mount/umount in FS driver +BuildRequires: util-linux +# For showmount in FS driver (netfs discovery) +BuildRequires: nfs-utils + +# Fedora build root suckage +BuildRequires: gawk + +# For storage wiping with different algorithms +BuildRequires: scrub + +%if %{with_numad} +BuildRequires: numad +%endif + +%if %{with_wireshark} +BuildRequires: wireshark-devel +%endif + +%if %{with_libssh} +BuildRequires: libssh-devel >= 0.7.0 +%endif + +BuildRequires: rpcgen +BuildRequires: libtirpc-devel + +# Needed for the firewalld_reload macro +%if %{with_firewalld_zone} +BuildRequires: firewalld-filesystem +%endif + +%description +Libvirt is a C toolkit to interact with the virtualization capabilities +of recent versions of Linux (and other OSes). The main package includes +the libvirtd server exporting the virtualization support. + +%package docs +Summary: API reference and website documentation + +%description docs +Includes the API reference for the libvirt C library, and a complete +copy of the libvirt.org website documentation. + +%package daemon +Summary: Server side daemon and supporting files for libvirt library + +# All runtime requirements for the libvirt package (runtime requrements +# for subpackages are listed later in those subpackages) + +# The client side, i.e. shared libs are in a subpackage +Requires: %{name}-libs = %{version}-%{release} + +# (client invokes 'nc' against the UNIX socket on the server) +Requires: /usr/bin/nc + +# for modprobe of pci devices +Requires: module-init-tools + +# for /sbin/ip +Requires: iproute +# for /sbin/tc +Requires: iproute-tc + +Requires: polkit >= 0.112 +%if %{with_dmidecode} +# For virConnectGetSysinfo +Requires: dmidecode +%endif +# For service management +Requires(post): /usr/bin/systemctl +%if %{with_numad} +Requires: numad +%endif +# libvirtd depends on 'messagebus' service +Requires: dbus +# For uid creation during pre +Requires(pre): shadow-utils +# Needed by /usr/libexec/libvirt-guests.sh script. +Requires: gettext + +# Ensure smooth upgrades +Obsoletes: libvirt-admin < 7.3.0 +Provides: libvirt-admin = %{version}-%{release} +Obsoletes: libvirt-bash-completion < 7.3.0 + +%description daemon +Server side daemon required to manage the virtualization capabilities +of recent versions of Linux. Requires a hypervisor specific sub-RPM +for specific drivers. + +%package daemon-config-network +Summary: Default configuration files for the libvirtd daemon + +Requires: libvirt-daemon = %{version}-%{release} +Requires: libvirt-daemon-driver-network = %{version}-%{release} + +%description daemon-config-network +Default configuration files for setting up NAT based networking + +%package daemon-config-nwfilter +Summary: Network filter configuration files for the libvirtd daemon + +Requires: libvirt-daemon = %{version}-%{release} +Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} + +%description daemon-config-nwfilter +Network filter configuration files for cleaning guest traffic + +%package daemon-driver-network +Summary: Network driver plugin for the libvirtd daemon +Requires: libvirt-daemon = %{version}-%{release} +Requires: libvirt-libs = %{version}-%{release} +Requires: dnsmasq >= 2.41 +Requires: radvd +Requires: iptables + +%description daemon-driver-network +The network driver plugin for the libvirtd daemon, providing +an implementation of the virtual network APIs using the Linux +bridge capabilities. + + +%package daemon-driver-nwfilter +Summary: Nwfilter driver plugin for the libvirtd daemon +Requires: libvirt-daemon = %{version}-%{release} +Requires: libvirt-libs = %{version}-%{release} +Requires: iptables +Requires: ebtables + +%description daemon-driver-nwfilter +The nwfilter driver plugin for the libvirtd daemon, providing +an implementation of the firewall APIs using the ebtables, +iptables and ip6tables capabilities + + +%package daemon-driver-nodedev +Summary: Nodedev driver plugin for the libvirtd daemon +Requires: libvirt-daemon = %{version}-%{release} +Requires: libvirt-libs = %{version}-%{release} +# needed for device enumeration +Requires: systemd >= 185 +# For managing persistent mediated devices +Requires: mdevctl + +%description daemon-driver-nodedev +The nodedev driver plugin for the libvirtd daemon, providing +an implementation of the node device APIs using the udev +capabilities. + + +%package daemon-driver-interface +Summary: Interface driver plugin for the libvirtd daemon +Requires: libvirt-daemon = %{version}-%{release} +Requires: libvirt-libs = %{version}-%{release} +%if %{with_netcf} +Requires: netcf-libs >= 0.2.2 +%endif + +%description daemon-driver-interface +The interface driver plugin for the libvirtd daemon, providing +an implementation of the host network interface APIs. + +%package daemon-driver-secret +Summary: Secret driver plugin for the libvirtd daemon +Requires: libvirt-daemon = %{version}-%{release} +Requires: libvirt-libs = %{version}-%{release} + +%description daemon-driver-secret +The secret driver plugin for the libvirtd daemon, providing +an implementation of the secret key APIs. + +%package daemon-driver-storage-core +Summary: Storage driver plugin including base backends for the libvirtd daemon +Requires: libvirt-daemon = %{version}-%{release} +Requires: libvirt-libs = %{version}-%{release} +Requires: nfs-utils +# For mkfs +Requires: util-linux +%if %{with_qemu} +# From QEMU RPMs +Requires: /usr/bin/qemu-img +%endif +%if !%{with_storage_rbd} +Obsoletes: libvirt-daemon-driver-storage-rbd < %{version}-%{release} +%endif + +%description daemon-driver-storage-core +The storage driver plugin for the libvirtd daemon, providing +an implementation of the storage APIs using files, local disks, LVM, SCSI, +iSCSI, and multipath storage. + +%package daemon-driver-storage-logical +Summary: Storage driver plugin for lvm volumes +Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} +Requires: libvirt-libs = %{version}-%{release} +Requires: lvm2 + +%description daemon-driver-storage-logical +The storage driver backend adding implementation of the storage APIs for block +volumes using lvm. + + +%package daemon-driver-storage-disk +Summary: Storage driver plugin for disk +Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} +Requires: libvirt-libs = %{version}-%{release} +Requires: parted +Requires: device-mapper + +%description daemon-driver-storage-disk +The storage driver backend adding implementation of the storage APIs for block +volumes using the host disks. + + +%package daemon-driver-storage-scsi +Summary: Storage driver plugin for local scsi devices +Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} +Requires: libvirt-libs = %{version}-%{release} + +%description daemon-driver-storage-scsi +The storage driver backend adding implementation of the storage APIs for scsi +host devices. + + +%package daemon-driver-storage-iscsi +Summary: Storage driver plugin for iscsi +Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} +Requires: libvirt-libs = %{version}-%{release} +Requires: iscsi-initiator-utils + +%description daemon-driver-storage-iscsi +The storage driver backend adding implementation of the storage APIs for iscsi +volumes using the host iscsi stack. + + +%if %{with_storage_iscsi_direct} +%package daemon-driver-storage-iscsi-direct +Summary: Storage driver plugin for iscsi-direct +Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} +Requires: libvirt-libs = %{version}-%{release} + +%description daemon-driver-storage-iscsi-direct +The storage driver backend adding implementation of the storage APIs for iscsi +volumes using libiscsi direct connection. +%endif + + +%package daemon-driver-storage-mpath +Summary: Storage driver plugin for multipath volumes +Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} +Requires: libvirt-libs = %{version}-%{release} +Requires: device-mapper + +%description daemon-driver-storage-mpath +The storage driver backend adding implementation of the storage APIs for +multipath storage using device mapper. + + +%if %{with_storage_gluster} +%package daemon-driver-storage-gluster +Summary: Storage driver plugin for gluster +Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} +Requires: libvirt-libs = %{version}-%{release} + %if 0%{?fedora} +Requires: glusterfs-client >= 2.0.1 + %endif + %if (0%{?fedora} || 0%{?with_storage_gluster}) +Requires: /usr/sbin/gluster + %endif + +%description daemon-driver-storage-gluster +The storage driver backend adding implementation of the storage APIs for gluster +volumes using libgfapi. +%endif + + +%if %{with_storage_rbd} +%package daemon-driver-storage-rbd +Summary: Storage driver plugin for rbd +Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} +Requires: libvirt-libs = %{version}-%{release} + +%description daemon-driver-storage-rbd +The storage driver backend adding implementation of the storage APIs for rbd +volumes using the ceph protocol. +%endif + + +%if %{with_storage_sheepdog} +%package daemon-driver-storage-sheepdog +Summary: Storage driver plugin for sheepdog +Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} +Requires: libvirt-libs = %{version}-%{release} +Requires: sheepdog + +%description daemon-driver-storage-sheepdog +The storage driver backend adding implementation of the storage APIs for +sheepdog volumes using. +%endif + + +%if %{with_storage_zfs} +%package daemon-driver-storage-zfs +Summary: Storage driver plugin for ZFS +Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} +Requires: libvirt-libs = %{version}-%{release} +# Support any conforming implementation of zfs +Requires: /sbin/zfs +Requires: /sbin/zpool + +%description daemon-driver-storage-zfs +The storage driver backend adding implementation of the storage APIs for +ZFS volumes. +%endif + + +%package daemon-driver-storage +Summary: Storage driver plugin including all backends for the libvirtd daemon +Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} +Requires: libvirt-daemon-driver-storage-disk = %{version}-%{release} +Requires: libvirt-daemon-driver-storage-logical = %{version}-%{release} +Requires: libvirt-daemon-driver-storage-scsi = %{version}-%{release} +Requires: libvirt-daemon-driver-storage-iscsi = %{version}-%{release} +Requires: libvirt-daemon-driver-storage-mpath = %{version}-%{release} +%if %{with_storage_iscsi_direct} +Requires: libvirt-daemon-driver-storage-iscsi-direct = %{version}-%{release} +%endif +%if %{with_storage_gluster} +Requires: libvirt-daemon-driver-storage-gluster = %{version}-%{release} +%endif +%if %{with_storage_rbd} +Requires: libvirt-daemon-driver-storage-rbd = %{version}-%{release} +%endif +%if %{with_storage_sheepdog} +Requires: libvirt-daemon-driver-storage-sheepdog = %{version}-%{release} +%endif +%if %{with_storage_zfs} +Requires: libvirt-daemon-driver-storage-zfs = %{version}-%{release} +%endif + +%description daemon-driver-storage +The storage driver plugin for the libvirtd daemon, providing +an implementation of the storage APIs using LVM, iSCSI, +parted and more. + + +%if %{with_qemu} +%package daemon-driver-qemu +Summary: QEMU driver plugin for the libvirtd daemon +Requires: libvirt-daemon = %{version}-%{release} +Requires: libvirt-libs = %{version}-%{release} +Requires: /usr/bin/qemu-img +# For image compression +Requires: gzip +Requires: bzip2 +Requires: lzop +Requires: xz +Requires: systemd-container +Requires: swtpm-tools + +%description daemon-driver-qemu +The qemu driver plugin for the libvirtd daemon, providing +an implementation of the hypervisor driver APIs using +QEMU +%endif + + +%if %{with_lxc} +%package daemon-driver-lxc +Summary: LXC driver plugin for the libvirtd daemon +Requires: libvirt-daemon = %{version}-%{release} +Requires: libvirt-libs = %{version}-%{release} +# There really is a hard cross-driver dependency here +Requires: libvirt-daemon-driver-network = %{version}-%{release} +Requires: systemd-container + +%description daemon-driver-lxc +The LXC driver plugin for the libvirtd daemon, providing +an implementation of the hypervisor driver APIs using +the Linux kernel +%endif + + +%if %{with_vbox} +%package daemon-driver-vbox +Summary: VirtualBox driver plugin for the libvirtd daemon +Requires: libvirt-daemon = %{version}-%{release} +Requires: libvirt-libs = %{version}-%{release} + +%description daemon-driver-vbox +The vbox driver plugin for the libvirtd daemon, providing +an implementation of the hypervisor driver APIs using +VirtualBox +%endif + + +%if %{with_libxl} +%package daemon-driver-libxl +Summary: Libxl driver plugin for the libvirtd daemon +Requires: libvirt-daemon = %{version}-%{release} +Requires: libvirt-libs = %{version}-%{release} +Obsoletes: libvirt-daemon-driver-xen < 4.3.0 + +%description daemon-driver-libxl +The Libxl driver plugin for the libvirtd daemon, providing +an implementation of the hypervisor driver APIs using +Libxl +%endif + + + +%if %{with_qemu_tcg} +%package daemon-qemu +Summary: Server side daemon & driver required to run QEMU guests + +Requires: libvirt-daemon = %{version}-%{release} +Requires: libvirt-daemon-driver-qemu = %{version}-%{release} +Requires: libvirt-daemon-driver-interface = %{version}-%{release} +Requires: libvirt-daemon-driver-network = %{version}-%{release} +Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} +Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} +Requires: libvirt-daemon-driver-secret = %{version}-%{release} +Requires: libvirt-daemon-driver-storage = %{version}-%{release} +Requires: qemu + +%description daemon-qemu +Server side daemon and driver required to manage the virtualization +capabilities of the QEMU TCG emulators +%endif + + +%if %{with_qemu_kvm} +%package daemon-kvm +Summary: Server side daemon & driver required to run KVM guests + +Requires: libvirt-daemon = %{version}-%{release} +Requires: libvirt-daemon-driver-qemu = %{version}-%{release} +Requires: libvirt-daemon-driver-interface = %{version}-%{release} +Requires: libvirt-daemon-driver-network = %{version}-%{release} +Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} +Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} +Requires: libvirt-daemon-driver-secret = %{version}-%{release} +Requires: libvirt-daemon-driver-storage = %{version}-%{release} +Requires: qemu-kvm + +%description daemon-kvm +Server side daemon and driver required to manage the virtualization +capabilities of the KVM hypervisor +%endif + + +%if %{with_lxc} +%package daemon-lxc +Summary: Server side daemon & driver required to run LXC guests + +Requires: libvirt-daemon = %{version}-%{release} +Requires: libvirt-daemon-driver-lxc = %{version}-%{release} +Requires: libvirt-daemon-driver-interface = %{version}-%{release} +Requires: libvirt-daemon-driver-network = %{version}-%{release} +Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} +Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} +Requires: libvirt-daemon-driver-secret = %{version}-%{release} +Requires: libvirt-daemon-driver-storage = %{version}-%{release} + +%description daemon-lxc +Server side daemon and driver required to manage the virtualization +capabilities of LXC +%endif + + +%if %{with_libxl} +%package daemon-xen +Summary: Server side daemon & driver required to run XEN guests + +Requires: libvirt-daemon = %{version}-%{release} + %if %{with_libxl} +Requires: libvirt-daemon-driver-libxl = %{version}-%{release} + %endif +Requires: libvirt-daemon-driver-interface = %{version}-%{release} +Requires: libvirt-daemon-driver-network = %{version}-%{release} +Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} +Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} +Requires: libvirt-daemon-driver-secret = %{version}-%{release} +Requires: libvirt-daemon-driver-storage = %{version}-%{release} +Requires: xen + +%description daemon-xen +Server side daemon and driver required to manage the virtualization +capabilities of XEN +%endif + +%if %{with_vbox} +%package daemon-vbox +Summary: Server side daemon & driver required to run VirtualBox guests + +Requires: libvirt-daemon = %{version}-%{release} +Requires: libvirt-daemon-driver-vbox = %{version}-%{release} +Requires: libvirt-daemon-driver-interface = %{version}-%{release} +Requires: libvirt-daemon-driver-network = %{version}-%{release} +Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} +Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} +Requires: libvirt-daemon-driver-secret = %{version}-%{release} +Requires: libvirt-daemon-driver-storage = %{version}-%{release} + +%description daemon-vbox +Server side daemon and driver required to manage the virtualization +capabilities of VirtualBox +%endif + +%package client +Summary: Client side utilities of the libvirt library +Requires: %{name}-libs = %{version}-%{release} +# Needed by virt-pki-validate script. +Requires: gnutls-utils + +# Ensure smooth upgrades +Obsoletes: libvirt-bash-completion < 7.3.0 + +%description client +The client binaries needed to access the virtualization +capabilities of recent versions of Linux (and other OSes). + +%package libs +Summary: Client side libraries +# So remote clients can access libvirt over SSH tunnel +Requires: cyrus-sasl +# Needed by default sasl.conf - no onerous extra deps, since +# 100's of other things on a system already pull in krb5-libs +Requires: cyrus-sasl-gssapi + +%description libs +Shared libraries for accessing the libvirt daemon. + +%if %{with_wireshark} +%package wireshark +Summary: Wireshark dissector plugin for libvirt RPC transactions +Requires: wireshark +Requires: %{name}-libs = %{version}-%{release} + +%description wireshark +Wireshark dissector plugin for better analysis of libvirt RPC traffic. +%endif + +%if %{with_lxc} +%package login-shell +Summary: Login shell for connecting users to an LXC container +Requires: %{name}-libs = %{version}-%{release} + +%description login-shell +Provides the set-uid virt-login-shell binary that is used to +connect a user to an LXC container when they login, by switching +namespaces. +%endif + +%package devel +Summary: Libraries, includes, etc. to compile with the libvirt library +Requires: %{name}-libs = %{version}-%{release} +Requires: pkgconfig + +%description devel +Include header files & development libraries for the libvirt C library. + +%if %{with_sanlock} +%package lock-sanlock +Summary: Sanlock lock manager plugin for QEMU driver +Requires: sanlock >= 2.4 +#for virt-sanlock-cleanup require augeas +Requires: augeas +Requires: %{name}-daemon = %{version}-%{release} +Requires: %{name}-libs = %{version}-%{release} + +%description lock-sanlock +Includes the Sanlock lock manager plugin for the QEMU +driver +%endif + +%package nss +Summary: Libvirt plugin for Name Service Switch +Requires: libvirt-daemon-driver-network = %{version}-%{release} + +%description nss +Libvirt plugin for NSS for translating domain names into IP addresses. + + +%prep + +%autosetup -S git_am -N + +# "make dist" replaces all symlinks with a copy of the linked files; +# we need to replace all of them with the original symlinks +echo "Restoring symlinks" +while read lnk target; do + if [ -e $lnk ]; then + rm -rf $lnk + ln -s $target $lnk + fi +done <%{_sourcedir}/symlinks || exit 1 +git add . +git commit -q -a --allow-empty --author 'rpm-build <rpm-build>' -m symlinks + + +git config gc.auto 0 + +%autopatch + +%build +%if 0%{?fedora} >= %{min_fedora} || 0%{?rhel} >= %{min_rhel} + %define supported_platform 1 +%else + %define supported_platform 0 +%endif + +%if ! %{supported_platform} +echo "This RPM requires either Fedora >= %{min_fedora} or RHEL >= %{min_rhel}" +exit 1 +%endif + +%if %{with_qemu} + %define arg_qemu -Ddriver_qemu=enabled +%else + %define arg_qemu -Ddriver_qemu=disabled +%endif + +%if %{with_openvz} + %define arg_openvz -Ddriver_openvz=enabled +%else + %define arg_openvz -Ddriver_openvz=disabled +%endif + +%if %{with_lxc} + %define arg_lxc -Ddriver_lxc=enabled + %define arg_login_shell -Dlogin_shell=enabled +%else + %define arg_lxc -Ddriver_lxc=disabled + %define arg_login_shell -Dlogin_shell=disabled +%endif + +%if %{with_vbox} + %define arg_vbox -Ddriver_vbox=enabled +%else + %define arg_vbox -Ddriver_vbox=disabled +%endif + +%if %{with_libxl} + %define arg_libxl -Ddriver_libxl=enabled +%else + %define arg_libxl -Ddriver_libxl=disabled +%endif + +%if %{with_esx} + %define arg_esx -Ddriver_esx=enabled -Dcurl=enabled +%else + %define arg_esx -Ddriver_esx=disabled -Dcurl=disabled +%endif + +%if %{with_hyperv} + %define arg_hyperv -Ddriver_hyperv=enabled -Dopenwsman=enabled +%else + %define arg_hyperv -Ddriver_hyperv=disabled -Dopenwsman=disabled +%endif + +%if %{with_vmware} + %define arg_vmware -Ddriver_vmware=enabled +%else + %define arg_vmware -Ddriver_vmware=disabled +%endif + +%if %{with_storage_rbd} + %define arg_storage_rbd -Dstorage_rbd=enabled +%else + %define arg_storage_rbd -Dstorage_rbd=disabled +%endif + +%if %{with_storage_sheepdog} + %define arg_storage_sheepdog -Dstorage_sheepdog=enabled +%else + %define arg_storage_sheepdog -Dstorage_sheepdog=disabled +%endif + +%if %{with_storage_gluster} + %define arg_storage_gluster -Dstorage_gluster=enabled -Dglusterfs=enabled +%else + %define arg_storage_gluster -Dstorage_gluster=disabled -Dglusterfs=disabled +%endif + +%if %{with_storage_zfs} + %define arg_storage_zfs -Dstorage_zfs=enabled +%else + %define arg_storage_zfs -Dstorage_zfs=disabled +%endif + +%if %{with_numactl} + %define arg_numactl -Dnumactl=enabled +%else + %define arg_numactl -Dnumactl=disabled +%endif + +%if %{with_numad} + %define arg_numad -Dnumad=enabled +%else + %define arg_numad -Dnumad=disabled +%endif + +%if %{with_fuse} + %define arg_fuse -Dfuse=enabled +%else + %define arg_fuse -Dfuse=disabled +%endif + +%if %{with_sanlock} + %define arg_sanlock -Dsanlock=enabled +%else + %define arg_sanlock -Dsanlock=disabled +%endif + +%if %{with_firewalld_zone} + %define arg_firewalld_zone -Dfirewalld_zone=enabled +%else + %define arg_firewalld_zone -Dfirewalld_zone=disabled +%endif + +%if %{with_netcf} + %define arg_netcf -Dnetcf=enabled +%else + %define arg_netcf -Dnetcf=disabled +%endif + +%if %{with_wireshark} + %define arg_wireshark -Dwireshark_dissector=enabled +%else + %define arg_wireshark -Dwireshark_dissector=disabled +%endif + +%if %{with_storage_iscsi_direct} + %define arg_storage_iscsi_direct -Dstorage_iscsi_direct=enabled -Dlibiscsi=enabled +%else + %define arg_storage_iscsi_direct -Dstorage_iscsi_direct=disabled -Dlibiscsi=disabled +%endif + +%if %{with_libssh} + %define arg_libssh -Dlibssh=enabled +%else + %define arg_libssh -Dlibssh=disabled +%endif + +%if %{with_libssh2} + %define arg_libssh2 -Dlibssh2=enabled +%else + %define arg_libssh2 -Dlibssh2=disabled +%endif + +%if %{with_modular_daemons} + %define arg_remote_mode -Dremote_default_mode=direct +%else + %define arg_remote_mode -Dremote_default_mode=legacy +%endif + +%define when %(date +"%%F-%%T") +%define where %(hostname) +%define who %{?packager}%{!?packager:Unknown} +%define arg_packager -Dpackager="%{who}, %{when}, %{where}" +%define arg_packager_version -Dpackager_version="%{release}" + +%define arg_selinux_mount -Dselinux_mount="/sys/fs/selinux" + +# place macros above and build commands below this comment + +export SOURCE_DATE_EPOCH=$(stat --printf='%Y' %{_specdir}/%{name}.spec) + +%meson \ + -Drunstatedir=%{_rundir} \ + %{?arg_qemu} \ + %{?arg_openvz} \ + %{?arg_lxc} \ + %{?arg_vbox} \ + %{?arg_libxl} \ + -Dsasl=enabled \ + -Dpolkit=enabled \ + -Ddriver_libvirtd=enabled \ + -Ddriver_remote=enabled \ + -Ddriver_test=enabled \ + %{?arg_esx} \ + %{?arg_hyperv} \ + %{?arg_vmware} \ + -Ddriver_vz=disabled \ + -Ddriver_bhyve=disabled \ + -Ddriver_ch=disabled \ + %{?arg_remote_mode} \ + -Ddriver_interface=enabled \ + -Ddriver_network=enabled \ + -Dstorage_fs=enabled \ + -Dstorage_lvm=enabled \ + -Dstorage_iscsi=enabled \ + %{?arg_storage_iscsi_direct} \ + -Dstorage_scsi=enabled \ + -Dstorage_disk=enabled \ + -Dstorage_mpath=enabled \ + %{?arg_storage_rbd} \ + %{?arg_storage_sheepdog} \ + %{?arg_storage_gluster} \ + %{?arg_storage_zfs} \ + -Dstorage_vstorage=disabled \ + %{?arg_numactl} \ + %{?arg_numad} \ + -Dcapng=enabled \ + %{?arg_fuse} \ + %{?arg_netcf} \ + -Dselinux=enabled \ + %{?arg_selinux_mount} \ + -Dapparmor=disabled \ + -Dapparmor_profiles=disabled \ + -Dsecdriver_apparmor=disabled \ + -Dudev=enabled \ + -Dyajl=enabled \ + %{?arg_sanlock} \ + -Dlibpcap=enabled \ + -Dlibnl=enabled \ + -Daudit=enabled \ + -Ddtrace=enabled \ + -Dfirewalld=enabled \ + %{?arg_firewalld_zone} \ + %{?arg_wireshark} \ + %{?arg_libssh} \ + %{?arg_libssh2} \ + -Dpm_utils=disabled \ + -Dnss=enabled \ + %{arg_packager} \ + %{arg_packager_version} \ + -Dqemu_user=%{qemu_user} \ + -Dqemu_group=%{qemu_group} \ + -Dtls_priority=%{tls_priority} \ + %{?enable_werror} \ + -Dexpensive_tests=enabled \ + -Dinit_script=systemd \ + -Ddocs=enabled \ + -Dtests=enabled \ + -Drpath=disabled \ + %{?arg_login_shell} + +%meson_build + +%install +rm -fr %{buildroot} + +export SOURCE_DATE_EPOCH=$(stat --printf='%Y' %{_specdir}/%{name}.spec) + +%meson_install + +rm -f $RPM_BUILD_ROOT%{_libdir}/*.la +rm -f $RPM_BUILD_ROOT%{_libdir}/*.a +rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.la +rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.a +rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.la +rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.a +rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-backend/*.la +rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-backend/*.a +rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-file/*.la +rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-file/*.a +%if %{with_wireshark} +rm -f $RPM_BUILD_ROOT%{wireshark_plugindir}/libvirt.la +%endif + +install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/lib/libvirt/dnsmasq/ +# We don't want to install /etc/libvirt/qemu/networks in the main %%files list +# because if the admin wants to delete the default network completely, we don't +# want to end up re-incarnating it on every RPM upgrade. +install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/ +cp $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml \ + $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml +# libvirt saves this file with mode 0600 +chmod 0600 $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml + +# nwfilter files are installed in /usr/share/libvirt and copied to /etc in %%post +# to avoid verification errors on changed files in /etc +install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/nwfilter/ +cp -a $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter/*.xml \ + $RPM_BUILD_ROOT%{_datadir}/libvirt/nwfilter/ +# libvirt saves these files with mode 600 +chmod 600 $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter/*.xml + +%if ! %{with_qemu} +rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_qemu.aug +rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug +%endif +%find_lang %{name} + +%if ! %{with_sanlock} +rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirt_sanlock.aug +rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug +%endif + +%if ! %{with_lxc} +rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_lxc.aug +rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug +%endif + +%if ! %{with_qemu} +rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf +rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu +%endif +%if ! %{with_lxc} +rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/lxc.conf +rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.lxc +%endif +%if ! %{with_libxl} +rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/libxl.conf +rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.libxl +rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_libxl.aug +rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug +%endif + +# Copied into libvirt-docs subpackage eventually +mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt libvirt-docs + +%ifarch %{arches_systemtap_64bit} +mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes.stp \ + $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes-64.stp + + %if %{with_qemu} +mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes.stp \ + $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes-64.stp + %endif +%endif + +%check +# Building on slow archs, like emulated s390x in Fedora copr, requires +# raising the test timeout +VIR_TEST_DEBUG=1 %meson_test --no-suite syntax-check --timeout-multiplier 10 + +%define libvirt_daemon_schedule_restart() mkdir -p %{_localstatedir}/lib/rpm-state/libvirt || : \ +/bin/systemctl is-active %1.service 1>/dev/null 2>&1 && \ + touch %{_localstatedir}/lib/rpm-state/libvirt/restart-%1 || : + +%define libvirt_daemon_finish_restart() rm -f %{_localstatedir}/lib/rpm-state/libvirt/restart-%1 \ +rmdir %{_localstatedir}/lib/rpm-state/libvirt 2>/dev/null || : + +%define libvirt_daemon_needs_restart() -f %{_localstatedir}/lib/rpm-state/libvirt/restart-%1 + +%define libvirt_daemon_perform_restart() if test %libvirt_daemon_needs_restart %1 \ +then \ + /bin/systemctl try-restart %1.service >/dev/null 2>&1 || : \ +fi \ +%libvirt_daemon_finish_restart %1 + +%define libvirt_daemon_systemd_post() %systemd_post %1.socket %1-ro.socket %1-admin.socket %1.service + +%define libvirt_daemon_systemd_post_inet() %systemd_post %1.socket %1-ro.socket %1-admin.socket %1-tls.socket %1-tcp.socket %1.service + +%define libvirt_daemon_systemd_preun() %systemd_preun %1.service %1-ro.socket %1-admin.socket %1.socket + +%define libvirt_daemon_systemd_preun_inet() %systemd_preun %1.service %1-ro.socket %1-admin.socket %1-tls.socket %1-tcp.socket %1.socket + +%pre daemon +# 'libvirt' group is just to allow password-less polkit access to +# libvirtd. The uid number is irrelevant, so we use dynamic allocation +# described at the above link. +getent group libvirt >/dev/null || groupadd -r libvirt + +exit 0 + +%post daemon +%libvirt_daemon_systemd_post virtlogd +%libvirt_daemon_systemd_post virtlockdd +%if %{with_modular_daemons} +%libvirt_daemon_systemd_post_inet virtproxyd +%else +%libvirt_daemon_systemd_post_inet libvirtd +%endif + +%systemd_post libvirt-guests.service + +%libvirt_daemon_schedule_restart libvirtd + +%preun daemon +%systemd_preun libvirt-guests.service + +%libvirt_daemon_systemd_preun_inet libvirtd +%libvirt_daemon_systemd_preun_inet virtproxyd +%libvirt_daemon_systemd_preun virtlogd +%libvirt_daemon_systemd_preun virtlockdd + +%postun daemon +/bin/systemctl daemon-reload >/dev/null 2>&1 || : +if [ $1 -ge 1 ] ; then + /bin/systemctl reload-or-try-restart virtlockd.service virtlogd.service >/dev/null 2>&1 || : +fi +%systemd_postun libvirt-guests.service + +# In upgrade scenario we must explicitly enable virtlockd/virtlogd +# sockets, if libvirtd is already enabled and start them if +# libvirtd is running, otherwise you'll get failures to start +# guests +%triggerpostun daemon -- libvirt-daemon < 1.3.0 +if [ $1 -ge 1 ] ; then + /bin/systemctl is-enabled libvirtd.service 1>/dev/null 2>&1 && + /bin/systemctl enable virtlogd.socket virtlogd-admin.socket || : + /bin/systemctl is-active libvirtd.service 1>/dev/null 2>&1 && + /bin/systemctl start virtlogd.socket virtlogd-admin.socket || : +fi + +%posttrans daemon +if test %libvirt_daemon_needs_restart libvirtd +then + # See if user has previously modified their install to + # tell libvirtd to use --listen + grep -E '^LIBVIRTD_ARGS=.*--listen' /etc/sysconfig/libvirtd 1>/dev/null 2>&1 + if test $? = 0 + then + # Then lets keep honouring --listen and *not* use + # systemd socket activation, because switching things + # might confuse mgmt tool like puppet/ansible that + # expect the old style libvirtd + /bin/systemctl mask \ + libvirtd.socket \ + libvirtd-ro.socket \ + libvirtd-admin.socket \ + libvirtd-tls.socket \ + libvirtd-tcp.socket >/dev/null 2>&1 || : + else + # Old libvirtd owns the sockets and will delete them on + # shutdown. Can't use a try-restart as libvirtd will simply + # own the sockets again when it comes back up. Thus we must + # do this particular ordering, so that we get libvirtd + # running with socket activation in use + /bin/systemctl is-active libvirtd.service 1>/dev/null 2>&1 + if test $? = 0 + then + /bin/systemctl stop libvirtd.service >/dev/null 2>&1 || : + + /bin/systemctl try-restart \ + libvirtd.socket \ + libvirtd-ro.socket \ + libvirtd-admin.socket >/dev/null 2>&1 || : + + /bin/systemctl start libvirtd.service >/dev/null 2>&1 || : + fi + fi +fi + +%libvirt_daemon_finish_restart libvirtd + +%post daemon-driver-network +%if %{with_firewalld_zone} + %firewalld_reload +%endif + +%if %{with_modular_daemons} +%libvirt_daemon_systemd_post virtnetworkd +%endif +%libvirt_daemon_schedule_restart virtnetworkd + +%preun +%libvirt_daemon_systemd_preun virtnetworkd + +%postun daemon-driver-network +%if %{with_firewalld_zone} + %firewalld_reload +%endif + +%posttrans daemon-driver-network +%libvirt_daemon_perform_restart virtnetworkd + + +%post daemon-driver-nwfilter +%if %{with_modular_daemons} +%libvirt_daemon_systemd_post virtnwfilterd +%endif +%libvirt_daemon_schedule_restart virtnwfilterd + +%preun daemon-driver-nwfilter +%libvirt_daemon_systemd_preun virtnwfilterd + +%posttrans daemon-driver-nwfilter +%libvirt_daemon_perform_restart virtnwfilterd + + +%post daemon-driver-nodedev +%if %{with_modular_daemons} +%libvirt_daemon_systemd_post virtnodedevd +%endif +%libvirt_daemon_schedule_restart virtnodedevd + +%preun daemon-driver-nodedev +%libvirt_daemon_systemd_preun virtnodedevd + +%posttrans daemon-driver-nodedev +%libvirt_daemon_perform_restart virtnodedevd + + +%post daemon-driver-interface +%if %{with_modular_daemons} +%libvirt_daemon_systemd_post virtinterfaced +%endif +%libvirt_daemon_schedule_restart virtinterfaced + +%preun daemon-driver-interface +%libvirt_daemon_systemd_preun virtinterfaced + +%posttrans daemon-driver-interface +%libvirt_daemon_perform_restart virtinterfaced + + +%post daemon-driver-secret +%if %{with_modular_daemons} +%libvirt_daemon_systemd_post virtsecretd +%endif +%libvirt_daemon_schedule_restart virtsecretd + +%preun daemon-driver-secret +%libvirt_daemon_systemd_preun virtsecretd + +%posttrans daemon-driver-secret +%libvirt_daemon_perform_restart virtsecretd + + +%post daemon-driver-storage +%if %{with_modular_daemons} +%libvirt_daemon_systemd_post virtstoraged +%endif +%libvirt_daemon_schedule_restart virtstoraged + +%preun daemon-driver-storage +%libvirt_daemon_systemd_preun virtstoraged + +%posttrans daemon-driver-storage +%libvirt_daemon_perform_restart virtstoraged + + +%if %{with_qemu} +%post daemon-driver-qemu + %if %{with_modular_daemons} +%libvirt_daemon_systemd_post virtqemud + %endif +%libvirt_daemon_schedule_restart virtqemud + +%preun daemon-driver-qemu +%libvirt_daemon_systemd_preun virtqemud + +%posttrans daemon-driver-qemu +%libvirt_daemon_perform_restart virtqemud +%endif + + +%if %{with_lxc} +%post daemon-driver-lxc + %if %{with_modular_daemons} +%libvirt_daemon_systemd_post virtlxcd + %endif +%libvirt_daemon_schedule_restart virtlxcd + +%preun daemon-driver-lxc +%libvirt_daemon_systemd_preun virtlxcd + +%posttrans daemon-driver-lxc +%libvirt_daemon_perform_restart virtlxcd +%endif + + +%if %{with_vbox} +%post daemon-driver-vbox + %if %{with_modular_daemons} +%libvirt_daemon_systemd_post virtvboxd + %endif +%libvirt_daemon_schedule_restart virtvboxd + +%preun daemon-driver-vbox +%libvirt_daemon_systemd_preun virtvboxd + +%posttrans daemon-driver-vbox +%libvirt_daemon_perform_restart virtvboxd +%endif + + +%if %{with_libxl} +%post daemon-driver-libxl + %if %{with_modular_daemons} +%libvirt_daemon_systemd_post virtxend + %endif +%libvirt_daemon_schedule_restart virtxend + +%preun daemon-driver-libxl +%libvirt_daemon_systemd_preun virtxend + +%posttrans daemon-driver-libxl +%libvirt_daemon_perform_restart virtxend +%endif + + +%post daemon-config-network +if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ; then + # see if the network used by default network creates a conflict, + # and try to resolve it + # NB: 192.168.122.0/24 is used in the default.xml template file; + # do not modify any of those values here without also modifying + # them in the template. + orig_sub=122 + sub=${orig_sub} + nl=' +' + routes="${nl}$(ip route show | cut -d' ' -f1)${nl}" + case ${routes} in + *"${nl}192.168.${orig_sub}.0/24${nl}"*) + # there was a match, so we need to look for an unused subnet + for new_sub in $(seq 124 254); do + case ${routes} in + *"${nl}192.168.${new_sub}.0/24${nl}"*) + ;; + *) + sub=$new_sub + break; + ;; + esac + done + ;; + *) + ;; + esac + + sed -e "s/${orig_sub}/${sub}/g" \ + < %{_datadir}/libvirt/networks/default.xml \ + > %{_sysconfdir}/libvirt/qemu/networks/default.xml + ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml + # libvirt saves this file with mode 0600 + chmod 0600 %{_sysconfdir}/libvirt/qemu/networks/default.xml + + # Make sure libvirt picks up the new network defininiton + %libvirt_daemon_schedule_restart libvirtd + %libvirt_daemon_schedule_restart virtnetworkd +fi + +%posttrans daemon-config-network +%libvirt_daemon_perform_restart libvirtd +%libvirt_daemon_perform_restart virtnetworkd + +%post daemon-config-nwfilter +for datadir_file in %{_datadir}/libvirt/nwfilter/*.xml; do + sysconfdir_file=%{_sysconfdir}/libvirt/nwfilter/$(basename "$datadir_file") + if [ ! -f "$sysconfdir_file" ]; then + # libvirt saves these files with mode 600 + install -m 0600 "$datadir_file" "$sysconfdir_file" + fi +done +# Make sure libvirt picks up the new nwfilter defininitons +%libvirt_daemon_schedule_restart libvirtd +%libvirt_daemon_schedule_restart virtnwfilterd + +%posttrans daemon-config-nwfilter +%libvirt_daemon_perform_restart libvirtd +%libvirt_daemon_perform_restart virtnwfilterd + +%if %{with_qemu} +%pre daemon-driver-qemu +# We want soft static allocation of well-known ids, as disk images +# are commonly shared across NFS mounts by id rather than name; see +# https://fedoraproject.org/wiki/Packaging:UsersAndGroups +getent group kvm >/dev/null || groupadd -f -g 36 -r kvm +getent group qemu >/dev/null || groupadd -f -g 107 -r qemu +if ! getent passwd qemu >/dev/null; then + if ! getent passwd 107 >/dev/null; then + useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu + else + useradd -r -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu + fi +fi +exit 0 +%endif + +%if %{with_lxc} +%pre login-shell +getent group virtlogin >/dev/null || groupadd -r virtlogin +exit 0 +%endif + +%files + +%files docs +%doc AUTHORS.rst NEWS.rst README.rst +%doc libvirt-docs/* + +%files daemon + +%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/ + +%{_unitdir}/libvirtd.service +%{_unitdir}/libvirtd.socket +%{_unitdir}/libvirtd-ro.socket +%{_unitdir}/libvirtd-admin.socket +%{_unitdir}/libvirtd-tcp.socket +%{_unitdir}/libvirtd-tls.socket +%{_unitdir}/virtproxyd.service +%{_unitdir}/virtproxyd.socket +%{_unitdir}/virtproxyd-ro.socket +%{_unitdir}/virtproxyd-admin.socket +%{_unitdir}/virtproxyd-tcp.socket +%{_unitdir}/virtproxyd-tls.socket +%{_unitdir}/virt-guest-shutdown.target +%{_unitdir}/virtlogd.service +%{_unitdir}/virtlogd.socket +%{_unitdir}/virtlogd-admin.socket +%{_unitdir}/virtlockd.service +%{_unitdir}/virtlockd.socket +%{_unitdir}/virtlockd-admin.socket +%{_unitdir}/libvirt-guests.service +%config(noreplace) %{_sysconfdir}/sysconfig/libvirtd +%config(noreplace) %{_sysconfdir}/sysconfig/virtproxyd +%config(noreplace) %{_sysconfdir}/sysconfig/virtlogd +%config(noreplace) %{_sysconfdir}/sysconfig/virtlockd +%config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf +%config(noreplace) %{_sysconfdir}/libvirt/virtproxyd.conf +%config(noreplace) %{_sysconfdir}/libvirt/virtlogd.conf +%config(noreplace) %{_sysconfdir}/libvirt/virtlockd.conf +%config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf +%config(noreplace) %{_sysconfdir}/sysconfig/libvirt-guests +%config(noreplace) %{_prefix}/lib/sysctl.d/60-libvirtd.conf + +%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd +%dir %{_datadir}/libvirt/ + +%ghost %dir %{_rundir}/libvirt/ + +%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/images/ +%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/filesystems/ +%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/boot/ +%dir %attr(0711, root, root) %{_localstatedir}/cache/libvirt/ + + +%dir %attr(0755, root, root) %{_libdir}/libvirt/ +%dir %attr(0755, root, root) %{_libdir}/libvirt/connection-driver/ +%dir %attr(0755, root, root) %{_libdir}/libvirt/lock-driver +%attr(0755, root, root) %{_libdir}/libvirt/lock-driver/lockd.so + +%{_datadir}/augeas/lenses/libvirtd.aug +%{_datadir}/augeas/lenses/tests/test_libvirtd.aug +%{_datadir}/augeas/lenses/virtlogd.aug +%{_datadir}/augeas/lenses/tests/test_virtlogd.aug +%{_datadir}/augeas/lenses/virtlockd.aug +%{_datadir}/augeas/lenses/tests/test_virtlockd.aug +%{_datadir}/augeas/lenses/virtproxyd.aug +%{_datadir}/augeas/lenses/tests/test_virtproxyd.aug +%{_datadir}/augeas/lenses/libvirt_lockd.aug +%if %{with_qemu} +%{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug +%endif + +%{_datadir}/polkit-1/actions/org.libvirt.unix.policy +%{_datadir}/polkit-1/actions/org.libvirt.api.policy +%{_datadir}/polkit-1/rules.d/50-libvirt.rules + +%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/ + +%attr(0755, root, root) %{_libexecdir}/libvirt_iohelper + +%attr(0755, root, root) %{_bindir}/virt-ssh-helper + +%attr(0755, root, root) %{_sbindir}/libvirtd +%attr(0755, root, root) %{_sbindir}/virtproxyd +%attr(0755, root, root) %{_sbindir}/virtlogd +%attr(0755, root, root) %{_sbindir}/virtlockd +%attr(0755, root, root) %{_libexecdir}/libvirt-guests.sh + +%{_mandir}/man1/virt-admin.1* +%{_mandir}/man1/virt-host-validate.1* +%{_mandir}/man8/libvirtd.8* +%{_mandir}/man8/virtlogd.8* +%{_mandir}/man8/virtlockd.8* +%{_mandir}/man8/virtproxyd.8* +%{_mandir}/man7/virkey*.7* + +%{_bindir}/virt-host-validate +%{_bindir}/virt-admin +%{_datadir}/bash-completion/completions/virt-admin + +%files daemon-config-network +%dir %{_datadir}/libvirt/networks/ +%{_datadir}/libvirt/networks/default.xml +%ghost %{_sysconfdir}/libvirt/qemu/networks/default.xml +%ghost %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml + +%files daemon-config-nwfilter +%dir %{_datadir}/libvirt/nwfilter/ +%{_datadir}/libvirt/nwfilter/*.xml +%ghost %{_sysconfdir}/libvirt/nwfilter/*.xml + +%files daemon-driver-interface +%config(noreplace) %{_sysconfdir}/sysconfig/virtinterfaced +%config(noreplace) %{_sysconfdir}/libvirt/virtinterfaced.conf +%{_datadir}/augeas/lenses/virtinterfaced.aug +%{_datadir}/augeas/lenses/tests/test_virtinterfaced.aug +%{_unitdir}/virtinterfaced.service +%{_unitdir}/virtinterfaced.socket +%{_unitdir}/virtinterfaced-ro.socket +%{_unitdir}/virtinterfaced-admin.socket +%attr(0755, root, root) %{_sbindir}/virtinterfaced +%{_libdir}/%{name}/connection-driver/libvirt_driver_interface.so +%{_mandir}/man8/virtinterfaced.8* + +%files daemon-driver-network +%config(noreplace) %{_sysconfdir}/sysconfig/virtnetworkd +%config(noreplace) %{_sysconfdir}/libvirt/virtnetworkd.conf +%{_datadir}/augeas/lenses/virtnetworkd.aug +%{_datadir}/augeas/lenses/tests/test_virtnetworkd.aug +%{_unitdir}/virtnetworkd.service +%{_unitdir}/virtnetworkd.socket +%{_unitdir}/virtnetworkd-ro.socket +%{_unitdir}/virtnetworkd-admin.socket +%attr(0755, root, root) %{_sbindir}/virtnetworkd +%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/ +%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/ +%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart +%ghost %dir %{_rundir}/libvirt/network/ +%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/ +%dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/ +%attr(0755, root, root) %{_libexecdir}/libvirt_leaseshelper +%{_libdir}/%{name}/connection-driver/libvirt_driver_network.so +%{_mandir}/man8/virtnetworkd.8* + +%if %{with_firewalld_zone} +%{_prefix}/lib/firewalld/zones/libvirt.xml +%endif + +%files daemon-driver-nodedev +%config(noreplace) %{_sysconfdir}/sysconfig/virtnodedevd +%config(noreplace) %{_sysconfdir}/libvirt/virtnodedevd.conf +%{_datadir}/augeas/lenses/virtnodedevd.aug +%{_datadir}/augeas/lenses/tests/test_virtnodedevd.aug +%{_unitdir}/virtnodedevd.service +%{_unitdir}/virtnodedevd.socket +%{_unitdir}/virtnodedevd-ro.socket +%{_unitdir}/virtnodedevd-admin.socket +%attr(0755, root, root) %{_sbindir}/virtnodedevd +%{_libdir}/%{name}/connection-driver/libvirt_driver_nodedev.so +%{_mandir}/man8/virtnodedevd.8* + +%files daemon-driver-nwfilter +%config(noreplace) %{_sysconfdir}/sysconfig/virtnwfilterd +%config(noreplace) %{_sysconfdir}/libvirt/virtnwfilterd.conf +%{_datadir}/augeas/lenses/virtnwfilterd.aug +%{_datadir}/augeas/lenses/tests/test_virtnwfilterd.aug +%{_unitdir}/virtnwfilterd.service +%{_unitdir}/virtnwfilterd.socket +%{_unitdir}/virtnwfilterd-ro.socket +%{_unitdir}/virtnwfilterd-admin.socket +%attr(0755, root, root) %{_sbindir}/virtnwfilterd +%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/ +%ghost %dir %{_rundir}/libvirt/network/ +%{_libdir}/%{name}/connection-driver/libvirt_driver_nwfilter.so +%{_mandir}/man8/virtnwfilterd.8* + +%files daemon-driver-secret +%config(noreplace) %{_sysconfdir}/sysconfig/virtsecretd +%config(noreplace) %{_sysconfdir}/libvirt/virtsecretd.conf +%{_datadir}/augeas/lenses/virtsecretd.aug +%{_datadir}/augeas/lenses/tests/test_virtsecretd.aug +%{_unitdir}/virtsecretd.service +%{_unitdir}/virtsecretd.socket +%{_unitdir}/virtsecretd-ro.socket +%{_unitdir}/virtsecretd-admin.socket +%attr(0755, root, root) %{_sbindir}/virtsecretd +%{_libdir}/%{name}/connection-driver/libvirt_driver_secret.so +%{_mandir}/man8/virtsecretd.8* + +%files daemon-driver-storage + +%files daemon-driver-storage-core +%config(noreplace) %{_sysconfdir}/sysconfig/virtstoraged +%config(noreplace) %{_sysconfdir}/libvirt/virtstoraged.conf +%{_datadir}/augeas/lenses/virtstoraged.aug +%{_datadir}/augeas/lenses/tests/test_virtstoraged.aug +%{_unitdir}/virtstoraged.service +%{_unitdir}/virtstoraged.socket +%{_unitdir}/virtstoraged-ro.socket +%{_unitdir}/virtstoraged-admin.socket +%attr(0755, root, root) %{_sbindir}/virtstoraged +%attr(0755, root, root) %{_libexecdir}/libvirt_parthelper +%{_libdir}/%{name}/connection-driver/libvirt_driver_storage.so +%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_fs.so +%{_libdir}/%{name}/storage-file/libvirt_storage_file_fs.so +%{_mandir}/man8/virtstoraged.8* + +%files daemon-driver-storage-disk +%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_disk.so + +%files daemon-driver-storage-logical +%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_logical.so + +%files daemon-driver-storage-scsi +%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_scsi.so + +%files daemon-driver-storage-iscsi +%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_iscsi.so + +%if %{with_storage_iscsi_direct} +%files daemon-driver-storage-iscsi-direct +%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_iscsi-direct.so +%endif + +%files daemon-driver-storage-mpath +%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_mpath.so + +%if %{with_storage_gluster} +%files daemon-driver-storage-gluster +%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_gluster.so +%{_libdir}/%{name}/storage-file/libvirt_storage_file_gluster.so +%endif + +%if %{with_storage_rbd} +%files daemon-driver-storage-rbd +%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_rbd.so +%endif + +%if %{with_storage_sheepdog} +%files daemon-driver-storage-sheepdog +%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_sheepdog.so +%endif + +%if %{with_storage_zfs} +%files daemon-driver-storage-zfs +%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_zfs.so +%endif + +%if %{with_qemu} +%files daemon-driver-qemu +%config(noreplace) %{_sysconfdir}/sysconfig/virtqemud +%config(noreplace) %{_sysconfdir}/libvirt/virtqemud.conf +%{_datadir}/augeas/lenses/virtqemud.aug +%{_datadir}/augeas/lenses/tests/test_virtqemud.aug +%{_unitdir}/virtqemud.service +%{_unitdir}/virtqemud.socket +%{_unitdir}/virtqemud-ro.socket +%{_unitdir}/virtqemud-admin.socket +%attr(0755, root, root) %{_sbindir}/virtqemud +%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/ +%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/ +%config(noreplace) %{_sysconfdir}/libvirt/qemu.conf +%config(noreplace) %{_sysconfdir}/libvirt/qemu-lockd.conf +%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu +%ghost %dir %{_rundir}/libvirt/qemu/ +%dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/ +%dir %attr(0750, root, root) %{_localstatedir}/cache/libvirt/qemu/ +%{_datadir}/augeas/lenses/libvirtd_qemu.aug +%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug +%{_libdir}/%{name}/connection-driver/libvirt_driver_qemu.so +%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/swtpm/ +%dir %attr(0730, tss, tss) %{_localstatedir}/log/swtpm/libvirt/qemu/ +%{_bindir}/virt-qemu-run +%{_mandir}/man1/virt-qemu-run.1* +%{_mandir}/man8/virtqemud.8* +%endif + +%if %{with_lxc} +%files daemon-driver-lxc +%config(noreplace) %{_sysconfdir}/sysconfig/virtlxcd +%config(noreplace) %{_sysconfdir}/libvirt/virtlxcd.conf +%{_datadir}/augeas/lenses/virtlxcd.aug +%{_datadir}/augeas/lenses/tests/test_virtlxcd.aug +%{_unitdir}/virtlxcd.service +%{_unitdir}/virtlxcd.socket +%{_unitdir}/virtlxcd-ro.socket +%{_unitdir}/virtlxcd-admin.socket +%attr(0755, root, root) %{_sbindir}/virtlxcd +%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/ +%config(noreplace) %{_sysconfdir}/libvirt/lxc.conf +%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc +%ghost %dir %{_rundir}/libvirt/lxc/ +%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/ +%{_datadir}/augeas/lenses/libvirtd_lxc.aug +%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug +%attr(0755, root, root) %{_libexecdir}/libvirt_lxc +%{_libdir}/%{name}/connection-driver/libvirt_driver_lxc.so +%{_mandir}/man8/virtlxcd.8* +%endif + +%if %{with_libxl} +%files daemon-driver-libxl +%config(noreplace) %{_sysconfdir}/sysconfig/virtxend +%config(noreplace) %{_sysconfdir}/libvirt/virtxend.conf +%{_datadir}/augeas/lenses/virtxend.aug +%{_datadir}/augeas/lenses/tests/test_virtxend.aug +%{_unitdir}/virtxend.service +%{_unitdir}/virtxend.socket +%{_unitdir}/virtxend-ro.socket +%{_unitdir}/virtxend-admin.socket +%attr(0755, root, root) %{_sbindir}/virtxend +%config(noreplace) %{_sysconfdir}/libvirt/libxl.conf +%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.libxl +%config(noreplace) %{_sysconfdir}/libvirt/libxl-lockd.conf +%{_datadir}/augeas/lenses/libvirtd_libxl.aug +%{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug +%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/ +%ghost %dir %{_rundir}/libvirt/libxl/ +%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/ +%{_libdir}/%{name}/connection-driver/libvirt_driver_libxl.so +%{_mandir}/man8/virtxend.8* +%endif + +%if %{with_vbox} +%files daemon-driver-vbox +%config(noreplace) %{_sysconfdir}/sysconfig/virtvboxd +%config(noreplace) %{_sysconfdir}/libvirt/virtvboxd.conf +%{_datadir}/augeas/lenses/virtvboxd.aug +%{_datadir}/augeas/lenses/tests/test_virtvboxd.aug +%{_unitdir}/virtvboxd.service +%{_unitdir}/virtvboxd.socket +%{_unitdir}/virtvboxd-ro.socket +%{_unitdir}/virtvboxd-admin.socket +%attr(0755, root, root) %{_sbindir}/virtvboxd +%{_libdir}/%{name}/connection-driver/libvirt_driver_vbox.so +%{_mandir}/man8/virtvboxd.8* +%endif + +%if %{with_qemu_tcg} +%files daemon-qemu +%endif + +%if %{with_qemu_kvm} +%files daemon-kvm +%endif + +%if %{with_lxc} +%files daemon-lxc +%endif + +%if %{with_libxl} +%files daemon-xen +%endif + +%if %{with_vbox} +%files daemon-vbox +%endif + +%if %{with_sanlock} +%files lock-sanlock + %if %{with_qemu} +%config(noreplace) %{_sysconfdir}/libvirt/qemu-sanlock.conf + %endif + %if %{with_libxl} +%config(noreplace) %{_sysconfdir}/libvirt/libxl-sanlock.conf + %endif +%attr(0755, root, root) %{_libdir}/libvirt/lock-driver/sanlock.so +%{_datadir}/augeas/lenses/libvirt_sanlock.aug +%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug +%dir %attr(0770, root, sanlock) %{_localstatedir}/lib/libvirt/sanlock +%{_sbindir}/virt-sanlock-cleanup +%{_mandir}/man8/virt-sanlock-cleanup.8* +%attr(0755, root, root) %{_libexecdir}/libvirt_sanlock_helper +%endif + +%files client +%{_mandir}/man1/virsh.1* +%{_mandir}/man1/virt-xml-validate.1* +%{_mandir}/man1/virt-pki-validate.1* +%{_bindir}/virsh +%{_bindir}/virt-xml-validate +%{_bindir}/virt-pki-validate + +%{_datadir}/bash-completion/completions/virsh + +%files libs -f %{name}.lang +%license COPYING COPYING.LESSER +%config(noreplace) %{_sysconfdir}/libvirt/libvirt.conf +%config(noreplace) %{_sysconfdir}/libvirt/libvirt-admin.conf +%{_libdir}/libvirt.so.* +%{_libdir}/libvirt-qemu.so.* +%{_libdir}/libvirt-lxc.so.* +%{_libdir}/libvirt-admin.so.* +%dir %{_datadir}/libvirt/ +%dir %{_datadir}/libvirt/schemas/ +%dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/ + +%{_datadir}/systemtap/tapset/libvirt_probes*.stp +%{_datadir}/systemtap/tapset/libvirt_functions.stp +%if %{with_qemu} +%{_datadir}/systemtap/tapset/libvirt_qemu_probes*.stp +%endif + +%{_datadir}/libvirt/schemas/*.rng + +%{_datadir}/libvirt/cpu_map/*.xml + +%{_datadir}/libvirt/test-screenshot.png + +%if %{with_wireshark} +%files wireshark +%{wireshark_plugindir}/libvirt.so +%endif + +%files nss +%{_libdir}/libnss_libvirt.so.2 +%{_libdir}/libnss_libvirt_guest.so.2 + +%if %{with_lxc} +%files login-shell +%attr(4750, root, virtlogin) %{_bindir}/virt-login-shell +%{_libexecdir}/virt-login-shell-helper +%config(noreplace) %{_sysconfdir}/libvirt/virt-login-shell.conf +%{_mandir}/man1/virt-login-shell.1* +%endif + +%files devel +%{_libdir}/libvirt.so +%{_libdir}/libvirt-admin.so +%{_libdir}/libvirt-qemu.so +%{_libdir}/libvirt-lxc.so +%dir %{_includedir}/libvirt +%{_includedir}/libvirt/virterror.h +%{_includedir}/libvirt/libvirt.h +%{_includedir}/libvirt/libvirt-admin.h +%{_includedir}/libvirt/libvirt-common.h +%{_includedir}/libvirt/libvirt-domain.h +%{_includedir}/libvirt/libvirt-domain-checkpoint.h +%{_includedir}/libvirt/libvirt-domain-snapshot.h +%{_includedir}/libvirt/libvirt-event.h +%{_includedir}/libvirt/libvirt-host.h +%{_includedir}/libvirt/libvirt-interface.h +%{_includedir}/libvirt/libvirt-network.h +%{_includedir}/libvirt/libvirt-nodedev.h +%{_includedir}/libvirt/libvirt-nwfilter.h +%{_includedir}/libvirt/libvirt-secret.h +%{_includedir}/libvirt/libvirt-storage.h +%{_includedir}/libvirt/libvirt-stream.h +%{_includedir}/libvirt/libvirt-qemu.h +%{_includedir}/libvirt/libvirt-lxc.h +%{_libdir}/pkgconfig/libvirt.pc +%{_libdir}/pkgconfig/libvirt-admin.pc +%{_libdir}/pkgconfig/libvirt-qemu.pc +%{_libdir}/pkgconfig/libvirt-lxc.pc + +%dir %{_datadir}/libvirt/api/ +%{_datadir}/libvirt/api/libvirt-api.xml +%{_datadir}/libvirt/api/libvirt-admin-api.xml +%{_datadir}/libvirt/api/libvirt-qemu-api.xml +%{_datadir}/libvirt/api/libvirt-lxc-api.xml + + +%changelog +* Wed Nov 3 2021 Jiri Denemark <jdenemar@redhat.com> - 7.9.0-1 +- Rebased to libvirt-7.9.0 (rhbz#2012802) +- The rebase also fixes the following bugs: + rhbz#2011731, rhbz#2012385, rhbz#2013539 + +* Fri Oct 15 2021 Jiri Denemark <jdenemar@redhat.com> - 7.8.0-1 +- Rebased to libvirt-7.8.0 (rhbz#2012802) +- The rebase also fixes the following bugs: + rhbz#1839070, rhbz#1942275, rhbz#1995865, rhbz#1806857, rhbz#1924616 + rhbz#1978574, rhbz#1989457, rhbz#1965589, rhbz#1677608, rhbz#1926508 + rhbz#1810863, rhbz#1845468, rhbz#1738392, rhbz#1965140 + +* Thu Sep 2 2021 Danilo C. L. de Paula <ddepaula@redhat.com> - 7.6.0-2.fc34 +- Resolves: bz#2000225 + (Rebase virt:rhel module:stream based on AV-8.6) + +* Fri Aug 6 2021 Jiri Denemark <jdenemar@redhat.com> - 6.0.0-37 +- security: fix SELinux label generation logic (CVE-2021-3631) +- storage_driver: Unlock object on ACL fail in storagePoolLookupByTargetPath (CVE-2021-3667) + +* Tue Jun 1 2021 Jiri Denemark <jdenemar@redhat.com> - 6.0.0-36 +- network: make it safe to call networkSetupPrivateChains() multiple times (rhbz#1942805) +- network: force re-creation of iptables private chains on firewalld restart (rhbz#1942805) +- hostdev: Update mdev pointer reference after checking device type (rhbz#1940449) +- hostdev: mdev: Lookup mdevs by sysfs path rather than mdev struct (rhbz#1940449) +- qemu_firmware: don't error out for unknown firmware features (rhbz#1961562) +- docs: improve description of secure attribute for loader element (rhbz#1929357) +- conf: introduce virDomainDefParseBootInitOptions (rhbz#1929357) +- conf: introduce virDomainDefParseBootKernelOptions (rhbz#1929357) +- conf: introduce virDomainDefParseBootFirmwareOptions (rhbz#1929357) +- conf: introduce virDomainDefParseBootLoaderOptions (rhbz#1929357) +- conf: introduce virDomainDefParseBootAcpiOptions (rhbz#1929357) +- conf: use switch in virDomainDefParseBootOptions (rhbz#1929357) +- conf: introduce support for firmware auto-selection feature filtering (rhbz#1929357) +- qemu: implement support for firmware auto-selection feature filtering (rhbz#1929357) +- domain_conf: Don't leak def->os.firmwareFeatures (rhbz#1929357) +- conf: remove duplicated firmware type attribute (rhbz#1929357) + +* Thu Mar 4 2021 Jiri Denemark <jdenemar@redhat.com> - 6.0.0-35 +- vircgroupv2: properly detect placement of running VM (rhbz#1798463) +- virsystemd: export virSystemdHasMachined (rhbz#1798463) +- virsystemd: introduce virSystemdGetMachineByPID (rhbz#1798463) +- virsystemd: introduce virSystemdGetMachineUnitByPID (rhbz#1798463) +- vircgroup: use DBus call to systemd for some APIs (rhbz#1798463) +- vircgroupv1: refactor virCgroupV1DetectPlacement (rhbz#1798463) +- vircgroupv2: move task into cgroup before enabling controllers (rhbz#1798463) +- vircgroup: introduce virCgroupV1Exists and virCgroupV2Exists (rhbz#1798463) +- vircgroup: introduce nested cgroup to properly work with systemd (rhbz#1798463) +- tests: add cgroup nested tests (rhbz#1798463) +- vircgroup: correctly free nested virCgroupPtr (rhbz#1798463) +- qemu: Add virtio related options to vsock (rhbz#1931548) +- domain_validate: use defines for cpu period and quota limits (rhbz#1798463) +- docs: use proper cpu quota value in our documentation (rhbz#1798463) +- vircgroup: enforce range limit for cpu.shares (rhbz#1798463) +- cgroup: use virCgroupSetCpuShares instead of virCgroupSetupCpuShares (rhbz#1798463) +- cpumap: Add support for ibrs CPU feature (rhbz#1926864) +- cpumap: Add support for svme-addr-check CPU feature (rhbz#1926864) +- cpu_map: Add EPYC-Milan x86 CPU model (rhbz#1926864) +- cpu_map: Install x86_EPYC-Milan.xml (rhbz#1926864) +- cpu_map: Fix spelling of svme-addr-chk feature (rhbz#1926864) + +* Mon Feb 1 2021 Jiri Denemark <jdenemar@redhat.com> - 6.0.0-34 +- qemu: move cgroup cpu period and quota defines to vircgroup.h (rhbz#1915733) +- vircgroupv1: use defines for cpu period and quota limits (rhbz#1915733) +- vircgroupv2: use defines for cpu period and quota limits (rhbz#1915733) +- vircgroup: fix cpu quota maximum limit (rhbz#1915733) +- util: add virNetDevGetPhysPortName (rhbz#1918708) +- util: avoid manual VIR_FREE of a g_autofree pointer in virPCIGetName() (rhbz#1918708) +- util: Add phys_port_name support on virPCIGetNetName (rhbz#1918708) + +* Thu Jan 21 2021 Jiri Denemark <jdenemar@redhat.com> - 6.0.0-33 +- cpu_map: Fix Icelake Server model number (rhbz#1537734) +- cputestdata: Add test data for Snowridge (rhbz#1537734) +- cpu_map: Add support for fsrm CPU feature (rhbz#1537734) +- cpu_map: Add support for core-capability CPU feature (rhbz#1537734) +- cpu_map: Add support for split-lock-detect CPU feature (rhbz#1537734) +- cpu_map: Define and enable Snowridge model (rhbz#1537734) +- util: fix typo in VIR_MOCK_WRAP_RET_ARGS() (rhbz#1607929) +- util/tests: enable locking on iptables/ebtables commandlines in unit tests (rhbz#1607929) +- util/tests: enable locking on iptables/ebtables commandlines by default (rhbz#1607929) +- tests: fix iptables test case commandline options in virfirewalltest.c (rhbz#1607929) +- network: be more verbose about the reason for a firewall reload (rhbz#1607929) +- util: always check for ebtables/iptables binaries, even when using firewalld (rhbz#1607929) +- util: synchronize with firewalld before we start calling iptables directly (rhbz#1607929) +- util: call iptables directly rather than via firewalld (rhbz#1607929) +- util: virhostcpu: Fail when fetching CPU Stats for invalid cpu (rhbz#1915183) + +* Tue Dec 15 2020 Jiri Denemark <jdenemar@redhat.com> - 6.0.0-32 +- util: replace macvtap name reservation bitmap with a simple counter (rhbz#1874304) +- util: assign tap device names using a monotonically increasing integer (rhbz#1874304) +- util: virNetDevTapCreate: initialize fd to -1 (rhbz#1874304) + +* Thu Dec 10 2020 Jiri Denemark <jdenemar@redhat.com> - 6.0.0-31 +- conf: properly clear out autogenerated macvtap names when formatting/parsing (rhbz#1872610) +- qemu: format 'ramfb' attribute for mediated devices (rhbz#1876297) + +* Mon Nov 9 2020 Jiri Denemark <jdenemar@redhat.com> - 6.0.0-30 +- cpu_map: Add missing x86 features in 0x7 CPUID leaf (rhbz#1861506) +- cpu_map: Add missing x86 features in 0x80000008 CPUID leaf (rhbz#1861506) +- cpu_map: Add missing AMD SVM features (rhbz#1861506) +- Add testdata for AMD EPYC 7502 (rhbz#1861506) +- cpu_map: Defined and enable EPYC-Rome model (rhbz#1861506) +- cpu_map: Remove monitor feature from EPYC-Rome (rhbz#1861506) +- tests: qemuxml2argv: Use existing machine type for 'numatune-distances' case (rhbz#1749518) +- qemuxml2xmltest: Add "numatune-distance" test case (rhbz#1749518) +- conf: Move and rename virDomainParseScaledValue() (rhbz#1749518) +- numa_conf: Drop CPU from name of two functions (rhbz#1749518) +- qemu_command: Rename qemuBuildNumaArgStr() (rhbz#1749518) +- qemuBuildMachineCommandLine: Drop needless check (rhbz#1749518) +- numa_conf: Make virDomainNumaSetNodeCpumask() return void (rhbz#1749518) +- Allow NUMA nodes without vCPUs (rhbz#1749518) +- conf: Parse and format HMAT (rhbz#1749518) +- conf: Validate NUMA HMAT configuration (rhbz#1749518) +- numa: expose HMAT APIs (rhbz#1749518) +- qemu: Introduce QEMU_CAPS_NUMA_HMAT capability (rhbz#1749518) +- qemu: Build HMAT command line (rhbz#1749518) +- qemuBuildNumaCommandLine: Fix @masterInitiator check (rhbz#1749518) +- numa_conf: Properly check for caches in virDomainNumaDefValidate() (rhbz#1749518) +- RNG: Allow interleaving of /domain/cpu/numa/cell children (rhbz#1749518) + +* Fri Oct 9 2020 Jiri Denemark <jdenemar@redhat.com> - 6.0.0-29 +- qemu: substitute missing model name for host-passthrough (rhbz#1850680) +- rpc: gendispatch: handle empty flags (CVE-2020-25637) +- rpc: add support for filtering @acls by uint params (CVE-2020-25637) +- rpc: require write acl for guest agent in virDomainInterfaceAddresses (CVE-2020-25637) +- qemu: agent: set ifname to NULL after freeing (CVE-2020-25637) +- qemu: Fix domfsinfo for non-PCI device information from guest agent (rhbz#1858771) +- virDomainNetFindIdx: add support for CCW addresses (rhbz#1837495) +- check for NULL before calling g_regex_unref (rhbz#1861176) +- virhostcpu.c: fix 'die_id' parsing for Power hosts (rhbz#1876742) +- qemuFirmwareFillDomain: Fill NVRAM template on migration too (rhbz#1880418) +- node_device: refactor udevProcessCCW (rhbz#1853289, rhbz#1865932) +- node_device: detect CSS devices (rhbz#1853289, rhbz#1865932) +- virsh: nodedev: ability to filter CSS capabilities (rhbz#1853289, rhbz#1865932) +- node_device: detect DASD devices (rhbz#1853289, rhbz#1865932) +- udevProcessCSS: Check if def->driver is non-NULL (rhbz#1853289, rhbz#1865932) + +* Wed Aug 26 2020 Jiri Denemark <jdenemar@redhat.com> - 6.0.0-28 +- virdevmapper: Don't cache device-mapper major (rhbz#1860421) +- virdevmapper: Handle kernel without device-mapper support (rhbz#1860421) +- virdevmapper: Ignore all errors when opening /dev/mapper/control (rhbz#1860421) + +* Fri Aug 7 2020 Jiri Denemark <jdenemar@redhat.com> - 6.0.0-27 +- src: assume sys/sysmacros.h always exists on Linux (rhbz#1860421) +- virdevmapper.c: Join two WITH_DEVMAPPER sections together (rhbz#1860421) +- virDevMapperGetTargetsImpl: Use VIR_AUTOSTRINGLIST (rhbz#1860421) +- virdevmapper: Don't use libdevmapper to obtain dependencies (CVE-2020-14339, rhbz#1860421) +- virDevMapperGetTargets: Don't ignore EBADF (rhbz#1860421) + +* Fri Jul 24 2020 Jiri Denemark <jdenemar@redhat.com> - 6.0.0-26 +- qemu: blockjob: Don't base bitmap handling of active-layer block commit on QEMU_CAPS_BLOCKDEV_REOPEN (rhbz#1857779) +- qemu: blockjob: Actually delete temporary bitmap on failed active commit (rhbz#1857779) +- qemu: block: Remove 'active-write' bitmap even if there are no bitmaps to merge (rhbz#1857779) +- qemuDomainBlockPivot: Rename 'actions' to 'bitmapactions' (rhbz#1857779) +- qemuDomainBlockPivot: Ignore failures of creating active layer bitmap (rhbz#1857779) + +* Wed Jun 24 2020 Jiri Denemark <jdenemar@redhat.com> - 6.0.0-25 +- Upgrade components in virt:rhel module:stream for RHEL-8.3 release (rhbz#1828317) +- conf: Don't format http cookies unless VIR_DOMAIN_DEF_FORMAT_SECURE is used (CVE-2020-14301) +- util: Introduce a parser for kernel cmdline arguments (rhbz#1848997) +- qemu: Check if s390 secure guest support is enabled (rhbz#1848997) +- qemu: Check if AMD secure guest support is enabled (rhbz#1848997) +- tools: Secure guest check on s390 in virt-host-validate (rhbz#1848997) +- tools: Secure guest check for AMD in virt-host-validate (rhbz#1848997) +- docs: Update AMD launch secure description (rhbz#1848997) +- docs: Describe protected virtualization guest setup (rhbz#1848997) + +* Fri Jun 19 2020 Danilo C. L. de Paula <ddepaula@redhat.com> - 6.0.0 +- Resolves: bz#1828317 +(Upgrade components in virt:rhel module:stream for RHEL-8.3 release) + +* Tue Jun 09 2020 Danilo C. L. de Paula <ddepaula@redhat.com> - 6.0.0 +- Resolves: bz#1810193 +(Upgrade components in virt:rhel module:stream for RHEL-8.3 release) + +* Fri Jun 05 2020 Danilo C. L. de Paula <ddepaula@redhat.com> - 6.0.0 +- Resolves: bz#1810193 +(Upgrade components in virt:rhel module:stream for RHEL-8.3 release) + +* Mon Apr 27 2020 Danilo C. L. de Paula <ddepaula@redhat.com> - 6.0.0 +- Resolves: bz#1810193 + (Upgrade components in virt:rhel module:stream for RHEL-8.3 release) + +* Mon Mar 16 2020 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-42 +- RHEL: virscsi: Check device type before getting it's /dev node name (rhbz#1808388) +- RHEL: virscsi: Support TAPEs in virSCSIDeviceGetDevName() (rhbz#1808388) +- RHEL: virscsi: Introduce and use virSCSIDeviceGetUnprivSGIOSysfsPath() (rhbz#1808388) +- RHEL: virutil: Accept non-block devices in virGetDeviceID() (rhbz#1808388) +- RHEL: qemuSetUnprivSGIO: Actually use calculated @sysfs_path to set unpriv_sgio (rhbz#1808388) +- RHEL: qemuCheckUnprivSGIO: use @sysfs_path to get unpriv_sgio (rhbz#1808399) + +* Wed Mar 4 2020 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-41 +- qemu: Translate features in virQEMUCapsGetCPUFeatures (rhbz#1804224) + +* Mon Feb 17 2020 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-40 +- process: wait longer on kill per assigned Hostdev (rhbz#1785338) +- process: wait longer 5->30s on hard shutdown (rhbz#1785338) + +* Mon Feb 10 2020 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-39 +- selinux: Do not report an error when not returning -1 (rhbz#1788096) +- qemu: Fix hyperv features with QEMU 4.1 (rhbz#1794868) +- qemu: Prefer dashes for hyperv features (rhbz#1794868) +- cpu: Drop KVM_ from hyperv feature macros (rhbz#1794868) +- cpu: Drop unused KVM features (rhbz#1794868) +- qemu: Fix KVM features with QEMU 4.1 (rhbz#1794868) +- cpu: Drop CPUID definition for hv-spinlocks (rhbz#1794868) + +* Tue Jan 14 2020 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-38 +- cpu_map/x86: Add support for BFLOAT16 data type (rhbz#1749516) + +* Fri Dec 13 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-37 +- cpu_map: Add TAA_NO bit for IA32_ARCH_CAPABILITIES MSR (CVE-2019-11135) +- cpu_map: Add TSX_CTRL bit for IA32_ARCH_CAPABILITIES MSR (CVE-2019-11135) + +* Thu Nov 21 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-36 +- cpu_conf: Pass policy to CPU feature filtering callbacks (rhbz#1749672, rhbz#1756156, rhbz#1721608) +- qemuxml2*test: Add tests for Icelake-Server, -pconfig (rhbz#1749672, rhbz#1756156, rhbz#1721608) +- qemu: Drop disabled CPU features unknown to QEMU (rhbz#1749672, rhbz#1756156, rhbz#1721608) +- cputest: Add data for Ice Lake Server CPU (rhbz#1749672, rhbz#1756156, rhbz#1721608) +- cpu_map: Drop pconfig from Icelake-Server CPU model (rhbz#1749672, rhbz#1756156, rhbz#1721608) +- qemu: Fix NULL ptr dereference caused by qemuDomainDefFormatBufInternal (rhbz#1749672, rhbz#1756156, rhbz#1721608) + +* Mon Sep 16 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-35 +- vircgroupv2: fix setting cpu.max period (rhbz#1749227) + +* Wed Sep 4 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-34 +- vircgroupv2: fix abort in VIR_AUTOFREE (rhbz#1747440) + +* Mon Aug 26 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-33 +- vircgroupv2: fix parsing multiple values in single file (rhbz#1741825) +- vircgroupv2: fix virCgroupV2GetCpuCfsQuota for "max" value (rhbz#1741837) + +* Mon Aug 19 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-32 +- virDomainObjListAddLocked: Produce better error message than 'Duplicate key' (rhbz#1737790) +- virdbus: Grab a ref as long as the while loop is executed (rhbz#1741900) + +* Tue Jul 30 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-31 +- virDomainObjListAddLocked: fix double free (rhbz#1728530) +- docs: schemas: Decouple the virtio options from each other (rhbz#1729675) +- util: command: use VIR_AUTOFREE instead of VIR_FREE for scalar types (rhbz#1721434) +- util: command: define cleanup function using VIR_DEFINE_AUTOPTR_FUNC (rhbz#1721434) +- util: netdevopenvswitch: use VIR_AUTOFREE instead of VIR_FREE for scalar types (rhbz#1721434) +- util: virnetdevopenvswitch: Drop an unused variable @ovs_timeout (rhbz#1721434) +- util: netdevopenvswitch: use VIR_AUTOPTR for aggregate types (rhbz#1721434) +- util: suppress unimportant ovs-vsctl errors when getting interface stats (rhbz#1721434) +- virNetDevOpenvswitchInterfaceStats: Optimize for speed (rhbz#1721434) +- test: Introduce virnetdevopenvswitchtest (rhbz#1721434) +- vircommand: Separate mass FD closing into a function (rhbz#1721434) +- virCommand: use procfs to learn opened FDs (rhbz#1721434) +- util: command: Ignore bitmap errors when enumerating file descriptors to close (rhbz#1721434) +- util: Avoid possible error in virCommandMassClose (rhbz#1721434) +- vircgroup: fix cgroups v2 controllers detection (rhbz#1689297) +- vircgroupv2: store enabled controllers (rhbz#1689297) + +* Wed Jul 3 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-30 +- virWaitForDevices: Drop confusing part of comment (rhbz#1710575) +- lib: Drop UDEVSETTLE (rhbz#1710575) +- m4: Provide default value fore UDEVADM (rhbz#1710575) +- m4: Drop needless string checks (rhbz#1710575) +- util: vircgroup: introduce virCgroup(Get|Set)ValueRaw (rhbz#1658890) +- util: vircgroup: move virCgroupGetValueStr out of virCgroupGetValueForBlkDev (rhbz#1658890) +- util: vircgroupv1: add support for BFQ blkio files (rhbz#1658890) +- util: vircgroupv2: add support for BFQ files (rhbz#1658890) +- Handle copying bitmaps to larger data buffers (rhbz#1703160) + +* Tue Jul 2 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-29 +- cpu: allow include files for CPU definition (rhbz#1686895) +- cpu: fix cleanup when signature parsing fails (rhbz#1686895) +- cpu: push more parsing logic into common code (rhbz#1686895) +- cpu: simplify failure cleanup paths (rhbz#1686895) +- cpu_map: Add support for arch-capabilities feature (rhbz#1693433) +- cputest: Add data for Intel(R) Xeon(R) CPU E5-2630 v4 (rhbz#1686895) +- cputest: Add data for Intel(R) Core(TM) i7-7600U (rhbz#1686895) +- cputest: Add data for Intel(R) Xeon(R) CPU E7540 (rhbz#1686895) +- cputest: Add data for Intel(R) Xeon(R) CPU E5-2650 (rhbz#1686895) +- cputest: Add data for Intel(R) Core(TM) i7-8700 (rhbz#1686895) +- cpu_x86: Separate ancestor model parsing from x86ModelParse (rhbz#1686895) +- cpu_x86: Separate signature parsing from x86ModelParse (rhbz#1686895) +- cpu_x86: Separate vendor parsing from x86ModelParse (rhbz#1686895) +- cpu_x86: Separate feature list parsing from x86ModelParse (rhbz#1686895) +- cpu_x86: Make sure CPU model names are unique in cpu_map (rhbz#1686895) +- cpu_x86: Add x86ModelCopySignatures helper (rhbz#1686895) +- cpu_x86: Store CPU signature in an array (rhbz#1686895) +- cpu_x86: Allow multiple signatures for a CPU model (rhbz#1686895) +- cpu_x86: Log decoded CPU model and signatures (rhbz#1686895) +- qemu_capabilities: Inroduce virQEMUCapsGetCPUModelX86Data (rhbz#1686895) +- qemu_capabilities: Introduce virQEMUCapsGetCPUModelInfo (rhbz#1686895) +- qemu_capabilities: Use virQEMUCapsGetCPUModelInfo (rhbz#1686895) +- cpu_x86: Add virCPUx86DataGetSignature for tests (rhbz#1686895) +- cpu_map: Add hex representation of signatures (rhbz#1686895) +- cputest: Test CPU signatures (rhbz#1686895) +- cpu_map: Add more signatures for Conroe CPU model (rhbz#1686895) +- cpu_map: Add more signatures for Penryn CPU model (rhbz#1686895) +- cpu_map: Add more signatures for Nehalem CPU models (rhbz#1686895) +- cpu_map: Add more signatures for Westmere CPU model (rhbz#1686895) +- cpu_map: Add more signatures for SandyBridge CPU models (rhbz#1686895) +- cpu_map: Add more signatures for IvyBridge CPU models (rhbz#1686895) +- cpu_map: Add more signatures for Haswell CPU models (rhbz#1686895) +- cpu_map: Add more signatures for Broadwell CPU models (rhbz#1686895) +- cpu_map: Add more signatures for Skylake-Client CPU models (rhbz#1686895) +- cpu: Don't access invalid memory in virCPUx86Translate (rhbz#1686895) +- cpu_x86: Require <cpuid> within <feature> in CPU map (rhbz#1697627) +- cputest: Add data for Intel(R) Xeon(R) Platinum 8268 CPU (rhbz#1693433) +- cpu_map: Add Cascadelake-Server CPU model (rhbz#1693433) +- cpu_x86: Introduce virCPUx86DataItem container struct (rhbz#1697627) +- cpu_x86: Rename virCPUx86Vendor.cpuid (rhbz#1697627) +- cpu_x86: Rename virCPUx86DataItem variables (rhbz#1697627) +- cpu_x86: Rename x86DataCpuidNext function (rhbz#1697627) +- cpu_x86: Rename x86DataCpuid (rhbz#1697627) +- cpu_x86: Rename virCPUx86CPUIDSorter (rhbz#1697627) +- cpu_x86: Rename virCPUx86DataAddCPUIDInt (rhbz#1697627) +- cpu_x86: Rename virCPUx86DataAddCPUID (rhbz#1697627) +- cpu_x86: Rename virCPUx86VendorToCPUID (rhbz#1697627) +- cpu_x86: Simplify x86DataAdd (rhbz#1697627) +- cpu_x86: Introduce virCPUx86DataCmp (rhbz#1697627) +- cpu_x86: Make x86cpuidSetBits more general (rhbz#1697627) +- cpu_x86: Make x86cpuidClearBits more general (rhbz#1697627) +- cpu_x86: Make x86cpuidAndBits more general (rhbz#1697627) +- cpu_x86: Make x86cpuidMatchMasked more general (rhbz#1697627) +- cpu_x86: Make x86cpuidMatch more general (rhbz#1697627) +- cpu_x86: Store virCPUx86DataItem content in union (rhbz#1697627) +- cpu_x86: Add support for storing MSR features in CPU map (rhbz#1697627) +- cpu_x86: Move *CheckFeature functions (rhbz#1697627) +- cputest: Add support for MSR features to cpu-parse.sh (rhbz#1697627) +- util: file: introduce VIR_AUTOCLOSE macro to close fd of the file automatically (rhbz#1697627) +- vircpuhost: Add support for reading MSRs (rhbz#1697627) +- virhostcpu: Make virHostCPUGetMSR() work only on x86 (rhbz#1697627) +- cpu_x86: Fix placement of *CheckFeature functions (rhbz#1697627) +- cpu_conf: Introduce virCPUDefFilterFeatures (rhbz#1697627) +- qemu_command: Use consistent syntax for CPU features (rhbz#1697627) +- tests: Add QEMU caps data for future 4.1.0 (rhbz#1697627) +- tests: Add domain capabilities case for QEMU 4.1.0 (rhbz#1697627) +- qemuxml2argvtest: Add test for CPU features translation (rhbz#1697627) +- qemu: Add APIs for translating CPU features (rhbz#1697627) +- qemu: Probe for max-x86_64-cpu type (rhbz#1697627) +- qemu: Probe for "unavailable-features" CPU property (rhbz#1697627) +- qemu: Probe host CPU after capabilities (rhbz#1697627) +- qemu_command: Use canonical names of CPU features (rhbz#1697627) +- qemu: Translate feature names from query-cpu-model-expansion (rhbz#1697627) +- qemu: Don't use full CPU model expansion (rhbz#1697627) +- qemu: Make qemuMonitorGetGuestCPU usable on x86 only (rhbz#1697627) +- cpu: Introduce virCPUDataAddFeature (rhbz#1697627) +- qemu: Add type filter to qemuMonitorJSONParsePropsList (rhbz#1697627) +- util: string: Introduce macro for automatic string lists (rhbz#1697627) +- util: json: define cleanup function using VIR_DEFINE_AUTOPTR_FUNC (rhbz#1697627) +- qemu: Introduce generic qemuMonitorGetGuestCPU (rhbz#1697627) +- qemu_process: Prefer generic qemuMonitorGetGuestCPU (rhbz#1697627) +- util: Rework virStringListAdd (rhbz#1697627) +- conf: Introduce virCPUDefCheckFeatures (rhbz#1697627) +- cpu_x86: Turn virCPUx86DataIteratorInit into a function (rhbz#1697627) +- cpu_x86: Introduce virCPUx86FeatureFilter*MSR (rhbz#1697627) +- cpu_x86: Read CPU features from IA32_ARCH_CAPABILITIES MSR (rhbz#1697627) +- cpu_map: Introduce IA32_ARCH_CAPABILITIES MSR features (rhbz#1697627) +- qemu: Forbid MSR features with old QEMU (rhbz#1697627) +- qemu: Drop MSR features from host-model with old QEMU (rhbz#1697627) +- cpu_x86: Fix memory leak - virCPUx86GetHost (rhbz#1697627) +- qemu: Use @tmpChr in qemuDomainDetachChrDevice to build device string (rhbz#1624204) +- qemu: Drop "user-" prefix for guestfwd netdev (rhbz#1624204) +- qemu_hotplug: Attach guestfwd using netdev_add (rhbz#1624204) +- qemu_hotplug: Detach guestfwd using netdev_del (rhbz#1624204) +- qemuhotplugtest: Test guestfwd attach and detach (rhbz#1624204) +- daemon: Register secret driver before storage driver (rhbz#1685151) +- bhyve: Move autostarting of domains into bhyveStateInitialize (rhbz#1685151) +- Revert "virStateDriver - Separate AutoStart from Initialize" (rhbz#1685151) +- Revert "Separate out StateAutoStart from StateInitialize" (rhbz#1685151) +- util: moving 'type' argument to avoid issues with mount() syscall. (rhbz#1689297) +- util: cgroup: use VIR_AUTOFREE instead of VIR_FREE for scalar types (rhbz#1689297) +- vircgroup: Rename structs to start with underscore (rhbz#1689297) +- vircgroup: Introduce standard set of typedefs and use them (rhbz#1689297) +- vircgroup: Extract file link resolving into separate function (rhbz#1689297) +- vircgroup: Remove unused function virCgroupKill() (rhbz#1689297) +- vircgroup: Unexport unused function virCgroupAddTaskController() (rhbz#1689297) +- vircgroup: Unexport unused function virCgroupRemoveRecursively (rhbz#1689297) +- vircgroup: Move function used in tests into vircgrouppriv.h (rhbz#1689297) +- vircgroup: Remove pointless bool parameter (rhbz#1689297) +- vircgroup: Extract mount options matching into function (rhbz#1689297) +- vircgroup: Use virCgroupMountOptsMatchController in virCgroupDetectPlacement (rhbz#1689297) +- vircgroup: Introduce virCgroupEnableMissingControllers (rhbz#1689297) +- vircgroup: machinename will never be NULL (rhbz#1689297) +- vircgroup: Remove virCgroupAddTaskController (rhbz#1689297) +- vircgroup: Introduce virCgroupGetMemoryStat (rhbz#1689297) +- lxc: Use virCgroupGetMemoryStat (rhbz#1689297) +- vircgroup: fix MinGW build (rhbz#1689297) +- vircgroup: Duplicate string before modifying (rhbz#1689297) +- vircgroup: Extract controller detection into function (rhbz#1689297) +- vircgroup: Extract placement validation into function (rhbz#1689297) +- vircgroup: Split virCgroupPathOfController into two functions (rhbz#1689297) +- vircgroup: Call virCgroupRemove inside virCgroupMakeGroup (rhbz#1689297) +- vircgroup: Simplify if conditions in virCgroupMakeGroup (rhbz#1689297) +- vircgroup: Remove obsolete sa_assert (rhbz#1689297) +- tests: Resolve possible overrun (rhbz#1689297) +- vircgroup: cleanup controllers not managed by systemd on error (rhbz#1689297) +- vircgroup: fix bug in virCgroupEnableMissingControllers (rhbz#1689297) +- vircgroup: rename virCgroupAdd.*Task to virCgroupAdd.*Process (rhbz#1689297) +- vircgroup: introduce virCgroupTaskFlags (rhbz#1689297) +- vircgroup: introduce virCgroupAddThread (rhbz#1689297) +- vircgroupmock: cleanup unused cgroup files (rhbz#1689297) +- vircgroupmock: rewrite cgroup fopen mocking (rhbz#1689297) +- vircgrouptest: call virCgroupDetectMounts directly (rhbz#1689297) +- vircgrouptest: call virCgroupNewSelf instead virCgroupDetectMounts (rhbz#1689297) +- util: introduce vircgroupbackend files (rhbz#1689297) +- vircgroup: introduce cgroup v1 backend files (rhbz#1689297) +- vircgroup: extract virCgroupV1Available (rhbz#1689297) +- vircgroup: detect available backend for cgroup (rhbz#1689297) +- vircgroup: extract virCgroupV1ValidateMachineGroup (rhbz#1689297) +- vircgroup: extract virCgroupV1CopyMounts (rhbz#1689297) +- vircgroup: extract v1 detect functions (rhbz#1689297) +- vircgroup: extract virCgroupV1CopyPlacement (rhbz#1689297) +- vircgroup: extract virCgroupV1ValidatePlacement (rhbz#1689297) +- vircgroup: extract virCgroupV1StealPlacement (rhbz#1689297) +- vircgroup: extract virCgroupV1DetectControllers (rhbz#1689297) +- vircgroup: extract virCgroupV1HasController (rhbz#1689297) +- vircgroup: extract virCgroupV1GetAnyController (rhbz#1689297) +- vircgroup: extract virCgroupV1PathOfController (rhbz#1689297) +- vircgroup: extract virCgroupV1MakeGroup (rhbz#1689297) +- vircgroup: extract virCgroupV1Remove (rhbz#1689297) +- vircgroup: extract virCgroupV1AddTask (rhbz#1689297) +- vircgroup: extract virCgroupV1HasEmptyTasks (rhbz#1689297) +- vircgroup: extract virCgroupV1BindMount (rhbz#1689297) +- vircgroup: extract virCgroupV1SetOwner (rhbz#1689297) +- vircgroup: extract virCgroupV1(Set|Get)BlkioWeight (rhbz#1689297) +- vircgroup: extract virCgroupV1GetBlkioIoServiced (rhbz#1689297) +- vircgroup: extract virCgroupV1GetBlkioIoDeviceServiced (rhbz#1689297) +- vircgroup: extract virCgroupV1(Set|Get)BlkioDeviceWeight (rhbz#1689297) +- vircgroup: extract virCgroupV1(Set|Get)BlkioDeviceReadIops (rhbz#1689297) +- vircgroup: extract virCgroupV1(Set|Get)BlkioDeviceWriteIops (rhbz#1689297) +- vircgroup: extract virCgroupV1(Set|Get)BlkioDeviceReadBps (rhbz#1689297) +- vircgroup: extract virCgroupV1(Set|Get)BlkioDeviceWriteBps (rhbz#1689297) +- vircgroup: extract virCgroupV1SetMemory (rhbz#1689297) +- vircgroup: extract virCgroupV1GetMemoryStat (rhbz#1689297) +- vircgroup: extract virCgroupV1GetMemoryUsage (rhbz#1689297) +- vircgroup: extract virCgroupV1(Set|Get)Memory*Limit (rhbz#1689297) +- vircgroup: extract virCgroupV1GetMemSwapUsage (rhbz#1689297) +- vircgroup: extract virCgroupV1(Allow|Deny)Device (rhbz#1689297) +- vircgroup: extract virCgroupV1(Allow|Deny)AllDevices (rhbz#1689297) +- vircgroup: extract virCgroupV1(Set|Get)CpuShares (rhbz#1689297) +- vircgroup: extract virCgroupV1(Set|Get)CpuCfsPeriod (rhbz#1689297) +- vircgroup: extract virCgroupV1(Set|Get)CpuCfsQuota (rhbz#1689297) +- vircgroup: extract virCgroupV1SupportsCpuBW (rhbz#1689297) +- vircgroup: extract virCgroupV1GetCpuacct*Usage (rhbz#1689297) +- vircgroup: extract virCgroupV1GetCpuacctStat (rhbz#1689297) +- vircgroup: extract virCgroupV1(Set|Get)FreezerState (rhbz#1689297) +- vircgroup: extract virCgroupV1(Set|Get)CpusetMems (rhbz#1689297) +- vircgroup: extract virCgroupV1(Set|Get)CpusetMemoryMigrate (rhbz#1689297) +- vircgroup: extract virCgroupV1(Set|Get)CpusetCpus (rhbz#1689297) +- vircgroup: rename virCgroupController into virCgroupV1Controller (rhbz#1689297) +- vircgroup: rename controllers to legacy (rhbz#1689297) +- vircgroup: remove VIR_CGROUP_SUPPORTED (rhbz#1689297) +- vircgroup: include system headers only on linux (rhbz#1689297) +- vircgroupv1: fix build on non-linux OSes (rhbz#1689297) +- Revert "vircgroup: cleanup controllers not managed by systemd on error" (rhbz#1689297) +- util: introduce cgroup v2 files (rhbz#1689297) +- vircgroup: introduce virCgroupV2Available (rhbz#1689297) +- vircgroup: introduce virCgroupV2ValidateMachineGroup (rhbz#1689297) +- vircgroup: introduce virCgroupV2CopyMounts (rhbz#1689297) +- vircgroup: introduce virCgroupV2CopyPlacement (rhbz#1689297) +- vircgroup: introduce virCgroupV2DetectMounts (rhbz#1689297) +- vircgroup: introduce virCgroupV2DetectPlacement (rhbz#1689297) +- vircgroup: introduce virCgroupV2ValidatePlacement (rhbz#1689297) +- vircgroup: introduce virCgroupV2StealPlacement (rhbz#1689297) +- vircgroup: introduce virCgroupV2DetectControllers (rhbz#1689297) +- vircgroup: introduce virCgroupV2HasController (rhbz#1689297) +- vircgroup: introduce virCgroupV2GetAnyController (rhbz#1689297) +- vircgroup: introduce virCgroupV2PathOfController (rhbz#1689297) +- vircgroup: introduce virCgroupV2MakeGroup (rhbz#1689297) +- vircgroup: introduce virCgroupV2Remove (rhbz#1689297) +- vircgroup: introduce virCgroupV2AddTask (rhbz#1689297) +- vircgroup: introduce virCgroupV2HasEmptyTasks (rhbz#1689297) +- vircgroup: introduce virCgroupV2BindMount (rhbz#1689297) +- vircgroup: introduce virCgroupV2SetOwner (rhbz#1689297) +- vircgroup: introduce virCgroupV2(Set|Get)BlkioWeight (rhbz#1689297) +- vircgroup: introduce virCgroupV2GetBlkioIoServiced (rhbz#1689297) +- vircgroup: introduce virCgroupV2GetBlkioIoDeviceServiced (rhbz#1689297) +- vircgroup: introduce virCgroupV2(Set|Get)BlkioDeviceWeight (rhbz#1689297) +- vircgroup: introduce virCgroupV2(Set|Get)BlkioDeviceReadIops (rhbz#1689297) +- vircgroup: introduce virCgroupV2(Set|Get)BlkioDeviceWriteIops (rhbz#1689297) +- vircgroup: introduce virCgroupV2(Set|Get)BlkioDeviceReadBps (rhbz#1689297) +- vircgroup: introduce virCgroupV2(Set|Get)BlkioDeviceWriteBps (rhbz#1689297) +- vircgroup: introduce virCgroupV2SetMemory (rhbz#1689297) +- vircgroup: introduce virCgroupV2GetMemoryStat (rhbz#1689297) +- vircgroup: introduce virCgroupV2GetMemoryUsage (rhbz#1689297) +- vircgroup: introduce virCgroupV2(Set|Get)MemoryHardLimit (rhbz#1689297) +- vircgroup: introduce virCgroupV2(Set|Get)MemorySoftLimit (rhbz#1689297) +- vircgroup: introduce virCgroupV2(Set|Get)MemSwapHardLimit (rhbz#1689297) +- vircgroup: introduce virCgroupV2GetMemSwapUsage (rhbz#1689297) +- vircgroup: introduce virCgroupV2(Set|Get)CpuShares (rhbz#1689297) +- vircgroup: introduce virCgroupV2(Set|Get)CpuCfsPeriod (rhbz#1689297) +- vircgroup: introduce virCgroupV2(Set|Get)CpuCfsQuota (rhbz#1689297) +- vircgroup: introduce virCgroupV2SupportsCpuBW (rhbz#1689297) +- vircgroup: introduce virCgroupV2GetCpuacctUsage (rhbz#1689297) +- vircgroup: introduce virCgroupV2GetCpuacctStat (rhbz#1689297) +- vircgroup: register cgroup v2 backend (rhbz#1689297) +- vircgroup: add support for hybrid configuration (rhbz#1689297) +- vircgroupmock: change cgroup prefix (rhbz#1689297) +- vircgroupmock: add support to test cgroup v2 (rhbz#1689297) +- vircgrouptest: introduce initFakeFS and cleanupFakeFS helpers (rhbz#1689297) +- vircgrouptest: prepare testCgroupDetectMounts for cgroup v2 (rhbz#1689297) +- vircgrouptest: add detect mounts test for cgroup v2 (rhbz#1689297) +- vircgrouptest: add detect mounts test for hybrid cgroups (rhbz#1689297) +- vircgrouptest: prepare validateCgroup for cgroupv2 (rhbz#1689297) +- vircgrouptest: add cgroup v2 tests (rhbz#1689297) +- vircgrouptest: add hybrid tests (rhbz#1689297) +- virt-host-validate: rewrite cgroup detection to use util/vircgroup (rhbz#1689297) +- virt-host-validate: require freezer for LXC (rhbz#1689297) +- virt-host-validate: Fix build on non-Linux (rhbz#1689297) +- tests: Use correct function name in error path (rhbz#1689297) +- util: Fix virCgroupGetMemoryStat (rhbz#1689297) +- tests: Augment vcgrouptest to add virCgroupGetMemoryStat (rhbz#1689297) +- vircgroup: introduce virCgroupKillRecursiveCB (rhbz#1689297) +- vircgroupv2: fix virCgroupV2ValidateMachineGroup (rhbz#1689297) +- util: implement virCgroupV2(Set|Get)CpusetMems (rhbz#1689297) +- util: implement virCgroupV2(Set|Get)CpusetMemoryMigrate (rhbz#1689297) +- util: implement virCgroupV2(Set|Get)CpusetCpus (rhbz#1689297) +- util: enable cgroups v2 cpuset controller for threads (rhbz#1689297) +- util: vircgroup: pass parent cgroup into virCgroupDetectControllersCB (rhbz#1689297) +- internal: introduce a family of NULLSTR macros (rhbz#1689297) +- util: vircgroup: improve controller detection (rhbz#1689297) +- util: vircgroupv2: use any controller to create thread directory (rhbz#1689297) +- util: vircgroupv2: enable CPU controller only if it's available (rhbz#1689297) +- util: vircgroupv2: separate return values of virCgroupV2EnableController (rhbz#1689297) +- util: vircgroupv2: don't error out if enabling controller fails (rhbz#1689297) +- util: vircgroupv2: mark only requested controllers as available (rhbz#1689297) +- Revert "util: vircgroup: pass parent cgroup into virCgroupDetectControllersCB" (rhbz#1689297) +- util: vircgroupv2: stop enabling missing controllers with systemd (rhbz#1689297) + +* Fri Jun 28 2019 Danilo de Paula <ddepaula@redhat.com> - 4.5.0-28 +- Rebuild all virt packages to fix RHEL's upgrade path +- Resolves: rhbz#1695587 + (Ensure modular RPM upgrade path) + +* Fri Jun 21 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-27 +- RHEL: spec: Disable gluster on i686 (rhbz#1722668) +- rpc: virnetlibsshsession: update deprecated functions (rhbz#1722735) + +* Thu Jun 20 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-26 +- api: disallow virDomainSaveImageGetXMLDesc on read-only connections (CVE-2019-10161) +- api: disallow virDomainManagedSaveDefineXML on read-only connections (CVE-2019-10166) +- api: disallow virConnectGetDomainCapabilities on read-only connections (CVE-2019-10167) +- api: disallow virConnect*HypervisorCPU on read-only connections (CVE-2019-10168) + +* Fri Jun 14 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-25 +- admin: reject clients unless their UID matches the current UID (CVE-2019-10132) +- locking: restrict sockets to mode 0600 (CVE-2019-10132) +- logging: restrict sockets to mode 0600 (CVE-2019-10132) +- util: skip RDMA detection for non-PCI network devices (rhbz#1693299) +- virfile: Detect ceph as shared FS (rhbz#1698133) +- virfile: added GPFS as shared fs (rhbz#1698133) +- util: bitmap: define cleanup function using VIR_DEFINE_AUTOPTR_FUNC (rhbz#1716943) +- qemu: Rework setting process affinity (rhbz#1716943) +- qemu: Set up EMULATOR thread and cpuset.mems before exec()-ing qemu (rhbz#1716943) +- conf: Add definitions for 'uid' and 'fid' PCI address attributes (rhbz#1508149) +- qemu: Introduce zPCI capability (rhbz#1508149) +- qemu: Enable PCI multi bus for S390 guests (rhbz#1508149) +- conf: Introduce extension flag and zPCI member for PCI address (rhbz#1508149) +- conf: Introduce address caching for PCI extensions (rhbz#1508149) +- qemu: Auto add pci-root for s390/s390x guests (rhbz#1508149) +- conf: use virXMLFormatElement() in virDomainDeviceInfoFormat() (rhbz#1508149) +- conf: Introduce parser, formatter for uid and fid (rhbz#1508149) +- qemu: Add zPCI address definition check (rhbz#1508149) +- conf: Allocate/release 'uid' and 'fid' in PCI address (rhbz#1508149) +- qemu: Generate and use zPCI device in QEMU command line (rhbz#1508149) +- qemu: Add hotpluging support for PCI devices on S390 guests (rhbz#1508149) +- qemuDomainRemoveRNGDevice: Remove associated chardev too (rhbz#1508149) +- qemu_hotplug: remove erroneous call to qemuDomainDetachExtensionDevice() (rhbz#1508149) +- qemu_hotplug: remove another erroneous qemuDomainDetachExtensionDevice() call (rhbz#1508149) +- util: Propagate numad failures correctly (rhbz#1716907) +- util: Introduce virBitmapUnion() (rhbz#1716908) +- util: Introduce virNumaNodesetToCPUset() (rhbz#1716908) +- qemu: Fix qemuProcessInitCpuAffinity() (rhbz#1716908) +- qemu: Fix leak in qemuProcessInitCpuAffinity() (rhbz#1716908) +- qemu: Drop cleanup label from qemuProcessInitCpuAffinity() (rhbz#1716908) +- qemu: Fix NULL pointer access in qemuProcessInitCpuAffinity() (rhbz#1716908) +- qemuBuildMemoryBackendProps: Pass @priv instead of its individual members (rhbz#1624223) +- qemu: Don't use -mem-prealloc among with .prealloc=yes (rhbz#1624223) +- nwfilter: fix adding std MAC and IP values to filter binding (rhbz#1691356) +- qemuProcessBuildDestroyMemoryPathsImpl: Don't overwrite error (rhbz#1658112) +- qemu_security: Fully implement qemuSecurityDomainSetPathLabel (rhbz#1658112) +- qemu: process: SEV: Assume libDir to be the directory to create files in (rhbz#1658112) +- qemu: process: SEV: Relabel guest owner's SEV files created before start (rhbz#1658112) + +* Tue May 14 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-24 +- tests: qemuxml2argv: add CAPS_ARCH_LATEST macro (rhbz#1698855) +- qemu: Add ccw support for vhost-vsock (rhbz#1698855) +- qemu: Allow creating ppc64 guests with graphics and no USB mouse (rhbz#1683681) +- conf: Expose virDomainSCSIDriveAddressIsUsed (rhbz#1692354) +- qemuhotplugtest: Don't plug a SCSI disk at unit 7 (rhbz#1692354) +- qemu_hotplug: Check for duplicate drive addresses (rhbz#1692354) +- cpu_map: Add support for cldemote CPU feature (rhbz#1537731) +- util: alloc: add macros for implementing automatic cleanup functionality (rhbz#1505998) +- qemu: domain: Simplify non-VFIO memLockLimit calculation for PPC64 (rhbz#1505998) +- qemu_domain: add a PPC64 memLockLimit helper (rhbz#1505998) +- qemu_domain: NVLink2 bridge detection function for PPC64 (rhbz#1505998) +- PPC64 support for NVIDIA V100 GPU with NVLink2 passthrough (rhbz#1505998) +- cpu_x86: Do not cache microcode version (CVE-2018-12127, CVE-2019-11091, CVE-2018-12126, CVE-2018-12130) +- qemu: Don't cache microcode version (CVE-2018-12127, CVE-2019-11091, CVE-2018-12126, CVE-2018-12130) +- cputest: Add data for Intel(R) Xeon(R) CPU E3-1225 v5 (CVE-2018-12127, CVE-2019-11091, CVE-2018-12126, CVE-2018-12130) +- cpu_map: Define md-clear CPUID bit (CVE-2018-12127, CVE-2019-11091, CVE-2018-12126, CVE-2018-12130) + +* Fri Feb 15 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-23 +- network: explicitly allow icmp/icmpv6 in libvirt zonefile (rhbz#1650320) + +* Fri Feb 15 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-22 +- util: fix memory leak in virFirewallDInterfaceSetZone() (rhbz#1650320) + +* Fri Feb 8 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-21 +- docs: Drop /dev/net/tun from the list of shared devices (rhbz#1665400) +- qemu: conf: Remove /dev/sev from the default cgroup device acl list (rhbz#1665400) +- qemu: cgroup: Expose /dev/sev/ only to domains that require SEV (rhbz#1665400) +- qemu: domain: Add /dev/sev into the domain mount namespace selectively (rhbz#1665400) +- security: dac: Relabel /dev/sev in the namespace (rhbz#1665400) +- qemu: caps: Use CAP_DAC_OVERRIDE for probing to avoid permission issues (rhbz#1665400) +- qemu: caps: Don't try to ask for CAP_DAC_OVERRIDE if non-root (rhbz#1665400) +- Revert "RHEL: Require firewalld-filesystem for firewalld rpm macros" (rhbz#1650320) +- Revert "RHEL: network: regain guest network connectivity after firewalld switch to nftables" (rhbz#1650320) +- configure: change HAVE_FIREWALLD to WITH_FIREWALLD (rhbz#1650320) +- util: move all firewalld-specific stuff into its own files (rhbz#1650320) +- util: new virFirewallD APIs + docs (rhbz#1650320) +- configure: selectively install a firewalld 'libvirt' zone (rhbz#1650320) +- network: set firewalld zone of bridges to "libvirt" zone when appropriate (rhbz#1650320) +- network: allow configuring firewalld zone for virtual network bridge device (rhbz#1650320) +- util: remove test code accidentally committed to virFirewallDZoneExists (rhbz#1650320) +- qemu: command: Don't skip 'readonly' and throttling info for empty drive (rhbz#1670337) + +* Mon Jan 28 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-20 +- RHEL: qemu: Fix crash trying to use iSCSI hostdev (rhbz#1669424) + +* Thu Jan 24 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-19 +- qemu: Fix logic error in qemuSetUnprivSGIO (rhbz#1666605) +- tests: qemuxml2argv: Add test case for empty CDROM with cache mode (rhbz#1553255) +- qemu: command: Don't format image properties for empty -drive (rhbz#1553255) + +* Mon Jan 14 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-18 +- conf: correct false boot order error during domain parse (rhbz#1630393) +- qemu: Remove duplicated qemuAgentCheckError (rhbz#1665000) +- qemu: require reply from guest agent in qemuAgentGetInterfaces (rhbz#1665000) +- qemu: Filter non SCSI hostdevs in qemuHostdevPrepareSCSIDevices (rhbz#1665244) +- util: remove const specifier from nlmsghdr arg to virNetlinkDumpCallback() (rhbz#1583131) +- util: add a function to insert new interfaces to IPv6CheckForwarding list (rhbz#1583131) +- util: use nlmsg_find_attr() instead of an open-coded loop (rhbz#1583131) +- util: check accept_ra for all nexthop interfaces of multipath routes (rhbz#1583131) +- util: make forgotten changes suggested during review of commit d40b820c (rhbz#1583131) + +* Mon Jan 7 2019 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-17 +- virsh: Strip XML declaration when extracting CPU XMLs (rhbz#1659048) +- RHEL: qemu: Add ability to set sgio values for hostdev (rhbz#1582424) +- RHEL: qemu: Add check for unpriv sgio for SCSI generic host device (rhbz#1582424) +- qemu: Alter @val usage in qemuSetUnprivSGIO (rhbz#1656362) +- qemu: Alter qemuSetUnprivSGIO hostdev shareable logic (rhbz#1656362) + +* Mon Dec 17 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-16 +- util: Don't overflow in virRandomBits (rhbz#1655586) +- virrandom: Avoid undefined behaviour in virRandomBits (rhbz#1655586) +- spec: remove libcgroup and cgconfig (rhbz#1602407) +- qemu: Drop duplicated code from qemuDomainDefValidateFeatures() (rhbz#1647822) +- tests: Add capabilities data for QEMU 3.1.0 on ppc64 (rhbz#1647822) +- qemu: Introduce QEMU_CAPS_MACHINE_PSERIES_CAP_NESTED_HV (rhbz#1647822) +- conf: Parse and format nested-hv feature (rhbz#1647822) +- qemu: Format nested-hv feature on the command line (rhbz#1647822) +- qemu: Add check for whether KVM nesting is enabled (rhbz#1645139) +- secret: Add check/validation for correct usage when LookupByUUID (rhbz#1656255) +- cpu: Add support for "stibp" x86_64 feature (rhbz#1655032) + +* Mon Dec 3 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-15 +- virfile: Take symlink into account in virFileIsSharedFixFUSE (rhbz#1634782) +- qemu: Ignore nwfilter binding instantiation issues during reconnect (rhbz#1648544) +- qemu: Set identity for the reconnect all thread (rhbz#1648546) +- Revert "access: Modify the VIR_ERR_ACCESS_DENIED to include driverName" (rhbz#1631608) +- access: Modify the VIR_ERR_ACCESS_DENIED to include driverName (rhbz#1631608) +- qemu: add vfio-ap capability (rhbz#1508146) +- qemu: vfio-ap device support (rhbz#1508146) +- qemu: Extract MDEV VFIO PCI validation code into a separate helper (rhbz#1508146) +- conf: Move VFIO AP validation from post parse to QEMU validation code (rhbz#1508146) +- qemu: Fix post-copy migration on the source (rhbz#1649169) + +* Fri Nov 9 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-14 +- storage: Remove secretPath from _virStorageBackendQemuImgInfo (rhbz#1645459) +- storage: Allow for inputvol to have any format for encryption (rhbz#1645459) +- storage: Allow inputvol to be encrypted (rhbz#1645459) +- access: Modify the VIR_ERR_ACCESS_DENIED to include driverName (rhbz#1631608) +- docs: Enhance polkit documentation to describe secondary connection (rhbz#1631608) +- qemu: Don't ignore resume events (rhbz#1634758, rhbz#1643338) + +* Thu Nov 1 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-13 +- Revert "spec: Temporarily drop gluster support" (rhbz#1599339) + +* Wed Oct 17 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-12 +- RHEL: Require firewalld-filesystem for firewalld rpm macros (rhbz#1639932) + +* Tue Oct 16 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-11 +- virfile: fix cast-align error (rhbz#1634782) +- virfiletest: Fix test name prefix for virFileInData test (rhbz#1634782) +- virfiletst: Test virFileIsSharedFS (rhbz#1634782) +- virFileIsSharedFSType: Detect direct mount points (rhbz#1634782) +- virfile: Rework virFileIsSharedFixFUSE (rhbz#1634782) +- RHEL: network: regain guest network connectivity after firewalld switch to nftables (rhbz#1638864) + +* Mon Oct 8 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-10 +- conf: Fix check for chardev source path (rhbz#1609723) +- tests: Reuse qemucapabilities data for qemucaps2xml (rhbz#1629862) +- tests: Add more tests to qemucaps2xml (rhbz#1629862) +- qemu: Drop QEMU_CAPS_ENABLE_KVM (rhbz#1629862) +- qemu: Avoid probing non-native binaries all the time (rhbz#1629862) +- qemu: Clarify QEMU_CAPS_KVM (rhbz#1629862) +- qemu: Don't check for /dev/kvm presence (rhbz#1629862) +- tests: Follow up on qemucaps2xmldata rename (rhbz#1629862) +- security: dac: also label listen UNIX sockets (rhbz#1634775) +- spec: Set correct TLS priority (rhbz#1632269) +- spec: Build ceph and gluster support everywhere (rhbz#1599546) +- virsh: Require explicit --domain for domxml-to-native (rhbz#1634769) +- virFileIsSharedFSType: Check for fuse.glusterfs too (rhbz#1634782) +- qemu: fix up permissions for pre-created UNIX sockets (rhbz#1634775) +- cpu_map: Add features for Icelake CPUs (rhbz#1527657, rhbz#1526625) +- cpu_map: Add Icelake CPU models (rhbz#1526625) +- qemu: Properly report VIR_DOMAIN_EVENT_RESUMED_FROM_SNAPSHOT (rhbz#1634758) +- qemu: Report more appropriate running reasons (rhbz#1634758) +- qemu: Pass running reason to RESUME event handler (rhbz#1634758) +- qemu: Map running reason to resume event detail (rhbz#1634758) +- qemu: Avoid duplicate resume events and state changes (rhbz#1634758) +- conf: qemu: add support for Hyper-V frequency MSRs (rhbz#1589702) +- conf: qemu: add support for Hyper-V reenlightenment notifications (rhbz#1589702) +- conf: qemu: add support for Hyper-V PV TLB flush (rhbz#1589702) + +* Wed Sep 5 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-9 +- RHEL: Fix virConnectGetMaxVcpus output (rhbz#1582222) +- storage: Add --shrink to qemu-img command when shrinking vol (rhbz#1622534) +- access: Fix nwfilter-binding ACL access API name generation (rhbz#1622540) +- conf: Add validation of input devices (rhbz#1591240) +- tests: qemu: Remove disk from graphics-vnc-tls (rhbz#1598167) +- tests: qemu: test more versions for graphics-vnc-tls (rhbz#1598167) +- qemu: vnc: switch to tls-creds-x509 (rhbz#1598167) +- qemu: mdev: Use vfio-pci 'display' property only with vfio-pci mdevs (rhbz#1624740) +- virDomainDefCompatibleDevice: Relax alias change check (rhbz#1603133) +- virDomainDetachDeviceFlags: Clarify update semantics (rhbz#1603133) +- virDomainNetDefCheckABIStability: Check for MTU change too (rhbz#1623158) +- RHEL: spec: Require python3-devel on RHEL-8 (rhbz#1518446) +- qemu: monitor: Remove qemuMonitorJSONExtractCPUArchInfo wrapper (rhbz#1598829) +- qemu: monitor: Use 'target' instead of 'arch' in reply of 'query-cpus-fast' (rhbz#1598829) + +* Tue Aug 21 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-8 +- tests: Add missing thread_siblings_list files (rhbz#1608479) +- util: Rewrite virHostCPUCountThreadSiblings() (rhbz#1608479) +- utils: Remove arbitrary limit on socket_id/core_id (rhbz#1608479) +- tests: Add linux-high-ids test (rhbz#1608479) +- qemu: hotplug: Fix asynchronous unplug of 'shmem' (rhbz#1618680) +- tests: rename hugepages to hugepages-default (rhbz#1615461) +- tests: extract hugepages-numa-default-dimm out of hugepages-numa (rhbz#1615461) +- tests: rename hugepages-numa into hugepages-numa-default (rhbz#1615461) +- tests: remove unnecessary XML elements from hugepages-numa-default (rhbz#1615461) +- tests: extract pages-discard out of hugepages-pages (rhbz#1615461) +- tests: rename hugepages-pages into hugepages-numa-nodeset (rhbz#1615461) +- tests: rename hugepages-pages2 into hugepages-numa-default-2M (rhbz#1615461) +- tests: extract pages-discard-hugepages out of hugepages-pages3 (rhbz#1615461) +- tests: rename hugepages-pages3 into hugepages-numa-nodeset-part (rhbz#1615461) +- tests: rename hugepages-pages4 into hugepages-numa-nodeset-nonexist (rhbz#1615461) +- tests: rename hugepages-pages5 into hugepages-default-2M (rhbz#1615461) +- tests: rename hugepages-pages6 into hugepages-default-system-size (rhbz#1615461) +- tests: rename hugepages-pages7 into pages-dimm-discard (rhbz#1615461) +- tests: rename hugepages-pages8 into hugepages-nodeset-nonexist (rhbz#1615461) +- tests: introduce hugepages-default-1G-nodeset-2M (rhbz#1615461) +- tests: introduce hugepages-nodeset (rhbz#1615461) +- conf: Move hugepage XML validation check out of qemu_command (rhbz#1615461) +- conf: Move hugepages validation out of XML parser (rhbz#1615461) +- conf: Introduce virDomainDefPostParseMemtune (rhbz#1615461) +- tests: sev: Test launch-security with specific QEMU version (rhbz#1619150) +- qemu: Fix probing of AMD SEV support (rhbz#1619150) +- qemu: caps: Format SEV platform data into qemuCaps cache (rhbz#1619150) +- conf: Parse guestfwd channel device info again (rhbz#1610072) + +* Thu Aug 16 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-7 +- qemu_migration: Avoid writing to freed memory (rhbz#1615854) + +* Thu Aug 2 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-6 +- qemu: Exempt video model 'none' from getting a PCI address on Q35 +- conf: Fix a error msg typo in virDomainVideoDefValidate + +* Tue Jul 31 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-5 +- esx storage: Fix typo lsilogic -> lsiLogic +- networkGetDHCPLeases: Don't always report error if unable to read leases file +- nwfilter: Resolve SEGV for NWFilter Snoop processing +- qemu: Remove unused bypassSecurityDriver from qemuOpenFileAs +- qemuDomainSaveMemory: Don't enforce dynamicOwnership +- domain_nwfilter: Return early if net has no name in virDomainConfNWFilterTeardownImpl +- examples: Add clean-traffic-gateway into nwfilters + +* Mon Jul 23 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-4 +- qemu: hotplug: don't overwrite error message in qemuDomainAttachNetDevice +- qemu: hotplug: report error when changing rom enabled attr for net iface +- qemu: Fix setting global_period cputune element +- tests: qemucaps: Add test data for upcoming qemu 3.0.0 +- qemu: capabilities: Add capability for werror/rerror for 'usb-device' frontend +- qemu: command: Move graphics iteration to its own function +- qemu: address: Handle all the video devices within a single loop +- conf: Introduce virDomainVideoDefClear helper +- conf: Introduce virDomainDefPostParseVideo helper +- qemu: validate: Enforce compile time switch type checking for videos +- tests: Add capabilities data for QEMU 2.11 x86_64 +- tests: Update capabilities data for QEMU 3.0.0 x86_64 +- qemu: qemuBuildHostdevCommandLine: Use a helper variable mdevsrc +- qemu: caps: Introduce a capability for egl-headless +- qemu: Introduce a new graphics display type 'headless' +- qemu: caps: Add vfio-pci.display capability +- conf: Introduce virDomainGraphicsDefHasOpenGL helper +- conf: Replace 'error' with 'cleanup' in virDomainHostdevDefParseXMLSubsys +- conf: Introduce new <hostdev> attribute 'display' +- qemu: command: Enable formatting vfio-pci.display option onto cmdline +- docs: Rephrase the mediated devices hostdev section a bit +- conf: Introduce new video type 'none' +- virt-xml-validate: Add schema for nwfilterbinding +- tools: Fix typo generating adapter_wwpn field +- src: Fix memory leak in virNWFilterBindingDispose + +* Mon Jul 23 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-3 +- qemu: hotplug: Do not try to add secret object for TLS if it does not exist +- qemu: monitor: Make qemuMonitorAddObject more robust against programming errors +- spec: Explicitly require matching libvirt-libs +- virDomainConfNWFilterInstantiate: initialize @xml to avoid random crash +- qemuProcessStartPRDaemonHook: Try to set NS iff domain was started with one +- qemuDomainValidateStorageSource: Relax PR validation +- virStoragePRDefFormat: Suppress path formatting for migratable XML +- qemu: Wire up PR_MANAGER_STATUS_CHANGED event +- qemu_monitor: Introduce qemuMonitorJSONGetPRManagerInfo +- qemu: Fetch pr-helper process info on reconnect +- qemu: Fix ATTRIBUTE_NONNULL for qemuMonitorAddObject +- virsh.pod: Fix a command name typo in nwfilter-binding-undefine +- docs: schema: Add missing <alias> to vsock device +- virnetdevtap: Don't crash on !ifname in virNetDevTapInterfaceStats +- tests: fix TLS handshake failure with TLS 1.3 + +* Mon Jul 9 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-2 +- qemu: Add capability for the HTM pSeries feature +- conf: Parse and format the HTM pSeries feature +- qemu: Format the HTM pSeries feature +- qemu: hotplug: Don't access srcPriv when it's not allocated +- qemuDomainNestedJobAllowed: Allow QEMU_JOB_NONE +- src: Mention DEVICE_REMOVAL_FAILED event in virDomainDetachDeviceAlias docs +- virsh.pod: Drop --persistent for detach-device-alias +- qemu: don't use chardev FD passing with standalone args +- qemu: remove chardevStdioLogd param from vhostuser code path +- qemu: consolidate parameters of qemuBuildChrChardevStr into flags +- qemu: don't use chardev FD passing for vhostuser backend +- qemu: fix UNIX socket chardevs operating in client mode +- qemuDomainDeviceDefValidateNetwork: Check for range only if IP prefix set +- spec: Temporarily drop gluster support + +* Tue Jul 3 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-1 +- Rebased to libvirt-4.5.0 + +* Fri May 25 2018 Jiri Denemark <jdenemar@redhat.com> - 4.3.0-1 +- Rebased to libvirt-4.3.0 + +* Wed Mar 21 2018 Daniel P. Berrangé <berrange@redhat.com> - 4.1.0-2 +- Fix systemd macro argument with line continuations (rhbz#1558648) + +* Mon Mar 5 2018 Daniel Berrange <berrange@redhat.com> - 4.1.0-1 +- Rebase to version 4.1.0 + +* Wed Feb 07 2018 Fedora Release Engineering <releng@fedoraproject.org> - 4.0.0-2 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild + +* Fri Jan 19 2018 Daniel P. Berrange <berrange@redhat.com> - 4.0.0-1 +- Rebase to version 4.0.0 + +* Wed Dec 20 2017 Cole Robinson <crobinso@redhat.com> - 3.10.0-2 +- Rebuild for xen 4.10 + +* Tue Dec 5 2017 Daniel P. Berrange <berrange@redhat.com> - 3.10.0-1 +- Rebase to version 3.10.0 + +* Fri Nov 3 2017 Daniel P. Berrange <berrange@redhat.com> - 3.9.0-1 +- Rebase to version 3.9.0 + +* Wed Oct 4 2017 Daniel P. Berrange <berrange@redhat.com> - 3.8.0-1 +- Rebase to version 3.8.0 + +* Mon Sep 4 2017 Daniel P. Berrange <berrange@redhat.com> - 3.7.0-1 +- Rebase to version 3.7.0 + +* Wed Aug 2 2017 Daniel P. Berrange <berrange@redhat.com> - 3.6.0-1 +- Rebase to version 3.6.0 + +* Sun Jul 30 2017 Florian Weimer <fweimer@redhat.com> - 3.5.0-4 +- Rebuild with binutils fix for ppc64le (#1475636) + +* Tue Jul 25 2017 Daniel P. Berrange <berrange@redhat.com> - 3.5.0-3 +- Disabled RBD on i386, arm, ppc64 (rhbz #1474743) + +* Mon Jul 17 2017 Cole Robinson <crobinso@redhat.com> - 3.5.0-2 +- Rebuild for xen 4.9 + +* Thu Jul 6 2017 Daniel P. Berrange <berrange@redhat.com> - 3.5.0-1 +- Rebase to version 3.5.0 + +* Fri Jun 2 2017 Daniel P. Berrange <berrange@redhat.com> - 3.4.0-1 +- Rebase to version 3.4.0 + +* Mon May 8 2017 Daniel P. Berrange <berrange@redhat.com> - 3.3.0-1 +- Rebase to version 3.3.0 + +* Mon Apr 3 2017 Daniel P. Berrange <berrange@redhat.com> - 3.2.0-1 +- Rebase to version 3.2.0 + +* Fri Mar 3 2017 Daniel P. Berrange <berrange@redhat.com> - 3.1.0-1 +- Rebase to version 3.1.0 + +* Fri Feb 10 2017 Fedora Release Engineering <releng@fedoraproject.org> - 3.0.0-2 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild + +* Thu Jan 19 2017 Daniel P. Berrange <berrange@redhat.com> - 3.0.0-1 +- Rebase to version 3.0.0 |