%global _empty_manifest_terminate_build 0 Name: python-OctoPrint-PiSupport Version: 2022.6.13 Release: 1 Summary: Provides additional information about your Pi in the UI License: AGPLv3 URL: https://github.com/OctoPrint/OctoPrint-PiSupport Source0: https://mirrors.nju.edu.cn/pypi/web/packages/56/e1/24d7dad04870dd0aaf0b134abec7d478ded6922090e6639aebcf5e2e87bb/OctoPrint-PiSupport-2022.6.13.tar.gz BuildArch: noarch Requires: python3-pytest Requires: python3-ddt Requires: python3-mock Requires: python3-pre-commit %description # Pi Support The Pi Support plugin provides additional information about your Pi in the UI and also alerts you about undervoltage or overheating issues observed on your Pi or if your Pi is unsupported. If you are running OctoPi, the Pi Support plugin will also provide additional information about that. OctoPrint will only load this plugin when it detects that it is being run on a Raspberry Pi. This plugin was bundled right with OctoPrint's sources until version 1.6.0. It has been extracted into a standalone project to allow for a different release cycle, but is still considered a bundled plugin. ## Setup The plugin is part of the core dependencies of OctoPrint 1.6.0+ and will be installed automatically alongside it. In case you want to manually install it into an older version for whatever reason, install via the bundled [Plugin Manager](https://docs.octoprint.org/en/master/bundledplugins/pluginmanager.html) or manually using this URL: https://github.com/OctoPrint/OctoPrint-PiSupport/archive/main.zip To install and/or rollback to a specific version ``, either use this URL in the plugin manager: https://github.com/OctoPrint/OctoPrint-PiSupport/archive/.zip or run pip install OctoPrint-PiSupport== in your OctoPrint virtual environment, substituting `` accordingly. ## Events ### plugin_pi_support_throttle_state *(as `Events.PLUGIN_PI_SUPPORT_THROTTLE_STATE`)* A change in throttle state was detected. Payload: * `raw_value`: The raw throttle state value as received from `vcgencmd get_throttled` * `current_undervolate`: Whether there is currently an undervoltage condition * `past_undervoltage`: Whether there has been an undervoltage condition since last boot * `current_overheat`: Whether there is currently an overheat condition * `past_overheat`: Whether there has been an overheat condition since last boot * `current_issue`: Whether there is currently an undervoltage or overheat condition * `past_issue`: Whether there has been either an undervoltage or overheat condition since last boot ## Helpers ### get_throttled Access to `get_throttle_state`, to retrieve the current throttle state. Returns a `dict` with the same fields as the `PLUGIN_PI_SUPPORT_THROTTLE_STATE` event payload. By setting the keyword argument `run_now` set to `True`, the throttle state will be refreshed before returning. %package -n python3-OctoPrint-PiSupport Summary: Provides additional information about your Pi in the UI Provides: python-OctoPrint-PiSupport BuildRequires: python3-devel BuildRequires: python3-setuptools BuildRequires: python3-pip %description -n python3-OctoPrint-PiSupport # Pi Support The Pi Support plugin provides additional information about your Pi in the UI and also alerts you about undervoltage or overheating issues observed on your Pi or if your Pi is unsupported. If you are running OctoPi, the Pi Support plugin will also provide additional information about that. OctoPrint will only load this plugin when it detects that it is being run on a Raspberry Pi. This plugin was bundled right with OctoPrint's sources until version 1.6.0. It has been extracted into a standalone project to allow for a different release cycle, but is still considered a bundled plugin. ## Setup The plugin is part of the core dependencies of OctoPrint 1.6.0+ and will be installed automatically alongside it. In case you want to manually install it into an older version for whatever reason, install via the bundled [Plugin Manager](https://docs.octoprint.org/en/master/bundledplugins/pluginmanager.html) or manually using this URL: https://github.com/OctoPrint/OctoPrint-PiSupport/archive/main.zip To install and/or rollback to a specific version ``, either use this URL in the plugin manager: https://github.com/OctoPrint/OctoPrint-PiSupport/archive/.zip or run pip install OctoPrint-PiSupport== in your OctoPrint virtual environment, substituting `` accordingly. ## Events ### plugin_pi_support_throttle_state *(as `Events.PLUGIN_PI_SUPPORT_THROTTLE_STATE`)* A change in throttle state was detected. Payload: * `raw_value`: The raw throttle state value as received from `vcgencmd get_throttled` * `current_undervolate`: Whether there is currently an undervoltage condition * `past_undervoltage`: Whether there has been an undervoltage condition since last boot * `current_overheat`: Whether there is currently an overheat condition * `past_overheat`: Whether there has been an overheat condition since last boot * `current_issue`: Whether there is currently an undervoltage or overheat condition * `past_issue`: Whether there has been either an undervoltage or overheat condition since last boot ## Helpers ### get_throttled Access to `get_throttle_state`, to retrieve the current throttle state. Returns a `dict` with the same fields as the `PLUGIN_PI_SUPPORT_THROTTLE_STATE` event payload. By setting the keyword argument `run_now` set to `True`, the throttle state will be refreshed before returning. %package help Summary: Development documents and examples for OctoPrint-PiSupport Provides: python3-OctoPrint-PiSupport-doc %description help # Pi Support The Pi Support plugin provides additional information about your Pi in the UI and also alerts you about undervoltage or overheating issues observed on your Pi or if your Pi is unsupported. If you are running OctoPi, the Pi Support plugin will also provide additional information about that. OctoPrint will only load this plugin when it detects that it is being run on a Raspberry Pi. This plugin was bundled right with OctoPrint's sources until version 1.6.0. It has been extracted into a standalone project to allow for a different release cycle, but is still considered a bundled plugin. ## Setup The plugin is part of the core dependencies of OctoPrint 1.6.0+ and will be installed automatically alongside it. In case you want to manually install it into an older version for whatever reason, install via the bundled [Plugin Manager](https://docs.octoprint.org/en/master/bundledplugins/pluginmanager.html) or manually using this URL: https://github.com/OctoPrint/OctoPrint-PiSupport/archive/main.zip To install and/or rollback to a specific version ``, either use this URL in the plugin manager: https://github.com/OctoPrint/OctoPrint-PiSupport/archive/.zip or run pip install OctoPrint-PiSupport== in your OctoPrint virtual environment, substituting `` accordingly. ## Events ### plugin_pi_support_throttle_state *(as `Events.PLUGIN_PI_SUPPORT_THROTTLE_STATE`)* A change in throttle state was detected. Payload: * `raw_value`: The raw throttle state value as received from `vcgencmd get_throttled` * `current_undervolate`: Whether there is currently an undervoltage condition * `past_undervoltage`: Whether there has been an undervoltage condition since last boot * `current_overheat`: Whether there is currently an overheat condition * `past_overheat`: Whether there has been an overheat condition since last boot * `current_issue`: Whether there is currently an undervoltage or overheat condition * `past_issue`: Whether there has been either an undervoltage or overheat condition since last boot ## Helpers ### get_throttled Access to `get_throttle_state`, to retrieve the current throttle state. Returns a `dict` with the same fields as the `PLUGIN_PI_SUPPORT_THROTTLE_STATE` event payload. By setting the keyword argument `run_now` set to `True`, the throttle state will be refreshed before returning. %prep %autosetup -n OctoPrint-PiSupport-2022.6.13 %build %py3_build %install %py3_install install -d -m755 %{buildroot}/%{_pkgdocdir} if [ -d doc ]; then cp -arf doc %{buildroot}/%{_pkgdocdir}; fi if [ -d docs ]; then cp -arf docs %{buildroot}/%{_pkgdocdir}; fi if [ -d example ]; then cp -arf example %{buildroot}/%{_pkgdocdir}; fi if [ -d examples ]; then cp -arf examples %{buildroot}/%{_pkgdocdir}; fi pushd %{buildroot} if [ -d usr/lib ]; then find usr/lib -type f -printf "/%h/%f\n" >> filelist.lst fi if [ -d usr/lib64 ]; then find usr/lib64 -type f -printf "/%h/%f\n" >> filelist.lst fi if [ -d usr/bin ]; then find usr/bin -type f -printf "/%h/%f\n" >> filelist.lst fi if [ -d usr/sbin ]; then find usr/sbin -type f -printf "/%h/%f\n" >> filelist.lst fi touch doclist.lst if [ -d usr/share/man ]; then find usr/share/man -type f -printf "/%h/%f.gz\n" >> doclist.lst fi popd mv %{buildroot}/filelist.lst . mv %{buildroot}/doclist.lst . %files -n python3-OctoPrint-PiSupport -f filelist.lst %dir %{python3_sitelib}/* %files help -f doclist.lst %{_docdir}/* %changelog * Sun Apr 23 2023 Python_Bot - 2022.6.13-1 - Package Spec generated