%global _empty_manifest_terminate_build 0
Name: python-oschmod
Version: 0.3.12
Release: 1
Summary: Windows and Linux compatible chmod
License: Apache Software License 2.0
URL: https://github.com/yakdriver/oschmod
Source0: https://mirrors.nju.edu.cn/pypi/web/packages/9d/64/6e522f0a1b500470ae14dcd1a4bb8f8751f5cf441e85e9fee7dfc712cb7b/oschmod-0.3.12.tar.gz
BuildArch: noarch
Requires: python3-pywin32
%description
# oschmod
***oschmod*** sets consistent file permissions across Windows, Linux and macOS.
## oschmod TL;DR
***oschmod*** brings `chmod` functionality to **Windows**, macOS, and Linux! If you're not familiar, `chmod` is a handy macOS and Linux-only tool for setting file permissions.
Prior to ***oschmod***, Windows file permissions couldn't be set in the familiar `chmod` way. Tools did not translate `chmod`-style permissions into Windows-style file permissions. Even though Python's `os.chmod()` sets read, write, and execute file permissions, on Windows, `os.chmod()` basically has no effect. Even worse, Python on Windows gives no warnings or errors. If you think you set file permissions on Windows with `os.chmod()`, you're wrong!
***oschmod*** allows you to set consistent file permissions in a consistent way across platforms.
* Read more about [oschmod](https://medium.com/@dirk.avery/securing-files-on-windows-macos-and-linux-7b2b9899992) on Medium
* For more background, have a look at the [oschmod Wiki](https://github.com/YakDriver/oschmod/wiki).
## Installation
```console
$ pip install oschmod
```
## GNU Documentation
***oschmod*** changes the file mode bits of each given file according to mode, which can be either a symbolic representation of changes to make, or an octal number representing the bit pattern for the new mode bits.
The format of a symbolic mode is `[ugoa...][+-=][perms...]` where perms is zero or more letters from the set `rwx`. Multiple symbolic modes can be given, separated by commas.
A combination of the letters `ugoa` controls which users' access to the file will be changed: the user who owns it (`u`), other users in the file's group (`g`), other users not in the file's group (`o`), or all users (`a`). If none of these are given, the effect is as if `a` were given.
*(Modified from the GNU manpage for chmod.)*
## Command line interface
***oschmod*** brings the ability to set consistent file permissions using the command line to Windows, macOS, and Linux platforms. If you are familiar with `chmod`, ***oschmod*** works similarly, albeit with fewer options.
```console
$ oschmod -h
usage: oschmod [-h] [-R] mode object
Change the mode (permissions) of a file or directory
positional arguments:
mode octal or symbolic mode of the object
object file or directory
optional arguments:
-h, --help show this help message and exit
-R apply mode recursively
```
## Command line examples
You can use symbolic (e.g., "u+rw") or octal (e.g., "600) representations of modes. Multiple mode modifications can be made in a single call by separating modifiers with commas.
### Symbolic representation examples
Symbolic representation mode modifiers have three parts:
1. **whom:** To whom does the modification apply? You can include zero or more of `[ugoa]*` where `a` is for all, `u` is for the file owner (i.e., "**u**ser"), `g` is for the file group, and `o` is for others. In other words, `ugo` is equivalent to `a`. Also, if you do not provide a "whom," ***oschmod*** assumes you mean `a` (everyone).
2. **operation:** Which operation should be applied? You must include one and only one operation, `[+-=]{1}`, per modifier (although you can have multiple modifiers). `+` adds permissions, `-` removes permissions, and `=` sets permissions regardless of previous permissions. `+` and `-` modifications often depend on the current permissions.
3. **permission:** Which permission or permissions will be affected? You can include zero or more of `[rwx]*` where `r` is for read, `w` is for write, and `x` is for execute. If you do not include a permission with `+` or `-` (e.g., `u-`), the modifier has no effect. However, if you use no permissions with `=` (e.g., `o=`), all permissions are removed.
**Example 1:** To give everyone execute permissions on a file (all of these are equivalent):
```console
$ oschmod +x
$ oschmod a+x
$ oschmod ugo+x
```
**Example 2:** To remove read, write, and execute permissions from the file group and all others (these are equivalent):
```console
$ oschmod go-rwx
$ oschmod go=
```
**Example 3:** To give the file owner read and execute permissions, and remove execute permissions from the group and all others:
```console
$ oschmod u+rx,go-x
```
**Example 4:** To give everyone all permissions, and then remove execute write from the group, and execute from all others:
```console
$ oschmod a+rwx,g-w,o-x
```
### Octal representation examples
For more about what octal representations mean, see [this article](https://medium.com/@dirk.avery/securing-files-on-windows-macos-and-linux-7b2b9899992) on Medium.
**Example 5:** To give everyone read, write, and execute permissions on a file:
```console
$ oschmod 777
```
**Example 6:** To lock down a file to just give the file owner read, write, and execute permissions and deny all permissions to everyone else:
```console
$ oschmod 700
```
## Python usage
You can use ***oschmod*** from Python code. Any of the command line examples above will work very similarly. For example, *Example 4* above, in Python code, would look like this:
```python
import oschmod
oschmod.set_mode("myfile", "a+rwx,g-w,o-x")
```
*Example 5* above, in Python code, could be done in two ways:
```python
import oschmod
oschmod.set_mode("myfile", "777")
oschmod.set_mode("myfile", 0o777)
```
***oschmod*** is compatible with bitwise permissions as defined in the `stat` module. To give a file's owner read, write, and execute permissions and deny the group and others any permissions (i.e., equivalent of `700`):
```python
import oschmod
import stat
oschmod.set_mode('myfile', stat.S_IRUSR | stat.S_IWUSR | stat.S_IXUSR)
```
Replacing `os.chmod()` with ***oschmod*** should usually be an easy drop-in replacement. Replacement will allow you to get consistent file permission settings on Windows, macOS, and Linux:
If this is your Python code using `os.chmod()`:
```python
import os
os.chmod('myfile1', 'u+x')
os.chmod('myfile2', 0o777)
```
The replacement using ***oschmod*** is very similar:
```python
import oschmod
oschmod.set_mode('myfile1', 'u+x')
oschmod.set_mode('myfile2', 0o777)
```
## Changelog
### 0.3.0
**Commit Delta**: [Change from 0.2.4 release](https://github.com/YakDriver/oschmod/compare/0.2.4...0.3.0)
**Released**: 2020.05.27
**Summary**:
* Adds symbolic representation for mode changes (e.g., `+x`, `u+rwx`, `ugo-x`).
### 0.2.4
**Commit Delta**: [Change from 0.2.2 release](https://github.com/YakDriver/oschmod/compare/0.2.2...0.2.4)
**Released**: 2020.04.21
**Summary**:
* Add command line interface (CLI).
### 0.2.2
**Commit Delta**: [Change from 0.2.0 release](https://github.com/YakDriver/oschmod/compare/0.2.0...0.2.2)
**Released**: 2020.04.21
**Summary**:
* Fix issue with account lookup failing with error (`No mapping between account names and security IDs was done.`).
### 0.2.0
**Commit Delta**: [Change from 0.1.5 release](https://github.com/YakDriver/oschmod/compare/0.1.5...0.2.0)
**Released**: 2020.04.20
**Summary**:
* Add recursive version of `oschmod.set_mode()`: `oschmod.set_mode_recursive()`
### 0.1.5
**Commit Delta**: [Change from 0.1.4 release](https://github.com/YakDriver/oschmod/compare/0.1.4...0.1.5)
**Released**: 2020.04.17
**Summary**:
* Create Linux version of permissions test (`oschmod.perm_test()`)
### 0.1.4
**Commit Delta**: [Change from 0.1.0 release](https://github.com/YakDriver/oschmod/compare/0.1.0...0.1.4)
**Released**: 2020.04.17
**Summary**:
* Revise Windows to keep permissions an object already has for SYSTEM/NT AUTHORITY and don't include those permissions in mode calculation.
* Fix various minor cosmetic issues.
### 0.1.0
**Commit Delta**: [Change from 0.0.0 release](https://github.com/YakDriver/oschmod/compare/0.0.0...0.1.0)
**Released**: 2020.04.15
**Summary**:
* Initial release
%package -n python3-oschmod
Summary: Windows and Linux compatible chmod
Provides: python-oschmod
BuildRequires: python3-devel
BuildRequires: python3-setuptools
BuildRequires: python3-pip
%description -n python3-oschmod
# oschmod
***oschmod*** sets consistent file permissions across Windows, Linux and macOS.
## oschmod TL;DR
***oschmod*** brings `chmod` functionality to **Windows**, macOS, and Linux! If you're not familiar, `chmod` is a handy macOS and Linux-only tool for setting file permissions.
Prior to ***oschmod***, Windows file permissions couldn't be set in the familiar `chmod` way. Tools did not translate `chmod`-style permissions into Windows-style file permissions. Even though Python's `os.chmod()` sets read, write, and execute file permissions, on Windows, `os.chmod()` basically has no effect. Even worse, Python on Windows gives no warnings or errors. If you think you set file permissions on Windows with `os.chmod()`, you're wrong!
***oschmod*** allows you to set consistent file permissions in a consistent way across platforms.
* Read more about [oschmod](https://medium.com/@dirk.avery/securing-files-on-windows-macos-and-linux-7b2b9899992) on Medium
* For more background, have a look at the [oschmod Wiki](https://github.com/YakDriver/oschmod/wiki).
## Installation
```console
$ pip install oschmod
```
## GNU Documentation
***oschmod*** changes the file mode bits of each given file according to mode, which can be either a symbolic representation of changes to make, or an octal number representing the bit pattern for the new mode bits.
The format of a symbolic mode is `[ugoa...][+-=][perms...]` where perms is zero or more letters from the set `rwx`. Multiple symbolic modes can be given, separated by commas.
A combination of the letters `ugoa` controls which users' access to the file will be changed: the user who owns it (`u`), other users in the file's group (`g`), other users not in the file's group (`o`), or all users (`a`). If none of these are given, the effect is as if `a` were given.
*(Modified from the GNU manpage for chmod.)*
## Command line interface
***oschmod*** brings the ability to set consistent file permissions using the command line to Windows, macOS, and Linux platforms. If you are familiar with `chmod`, ***oschmod*** works similarly, albeit with fewer options.
```console
$ oschmod -h
usage: oschmod [-h] [-R] mode object
Change the mode (permissions) of a file or directory
positional arguments:
mode octal or symbolic mode of the object
object file or directory
optional arguments:
-h, --help show this help message and exit
-R apply mode recursively
```
## Command line examples
You can use symbolic (e.g., "u+rw") or octal (e.g., "600) representations of modes. Multiple mode modifications can be made in a single call by separating modifiers with commas.
### Symbolic representation examples
Symbolic representation mode modifiers have three parts:
1. **whom:** To whom does the modification apply? You can include zero or more of `[ugoa]*` where `a` is for all, `u` is for the file owner (i.e., "**u**ser"), `g` is for the file group, and `o` is for others. In other words, `ugo` is equivalent to `a`. Also, if you do not provide a "whom," ***oschmod*** assumes you mean `a` (everyone).
2. **operation:** Which operation should be applied? You must include one and only one operation, `[+-=]{1}`, per modifier (although you can have multiple modifiers). `+` adds permissions, `-` removes permissions, and `=` sets permissions regardless of previous permissions. `+` and `-` modifications often depend on the current permissions.
3. **permission:** Which permission or permissions will be affected? You can include zero or more of `[rwx]*` where `r` is for read, `w` is for write, and `x` is for execute. If you do not include a permission with `+` or `-` (e.g., `u-`), the modifier has no effect. However, if you use no permissions with `=` (e.g., `o=`), all permissions are removed.
**Example 1:** To give everyone execute permissions on a file (all of these are equivalent):
```console
$ oschmod +x
$ oschmod a+x
$ oschmod ugo+x
```
**Example 2:** To remove read, write, and execute permissions from the file group and all others (these are equivalent):
```console
$ oschmod go-rwx
$ oschmod go=
```
**Example 3:** To give the file owner read and execute permissions, and remove execute permissions from the group and all others:
```console
$ oschmod u+rx,go-x
```
**Example 4:** To give everyone all permissions, and then remove execute write from the group, and execute from all others:
```console
$ oschmod a+rwx,g-w,o-x
```
### Octal representation examples
For more about what octal representations mean, see [this article](https://medium.com/@dirk.avery/securing-files-on-windows-macos-and-linux-7b2b9899992) on Medium.
**Example 5:** To give everyone read, write, and execute permissions on a file:
```console
$ oschmod 777
```
**Example 6:** To lock down a file to just give the file owner read, write, and execute permissions and deny all permissions to everyone else:
```console
$ oschmod 700
```
## Python usage
You can use ***oschmod*** from Python code. Any of the command line examples above will work very similarly. For example, *Example 4* above, in Python code, would look like this:
```python
import oschmod
oschmod.set_mode("myfile", "a+rwx,g-w,o-x")
```
*Example 5* above, in Python code, could be done in two ways:
```python
import oschmod
oschmod.set_mode("myfile", "777")
oschmod.set_mode("myfile", 0o777)
```
***oschmod*** is compatible with bitwise permissions as defined in the `stat` module. To give a file's owner read, write, and execute permissions and deny the group and others any permissions (i.e., equivalent of `700`):
```python
import oschmod
import stat
oschmod.set_mode('myfile', stat.S_IRUSR | stat.S_IWUSR | stat.S_IXUSR)
```
Replacing `os.chmod()` with ***oschmod*** should usually be an easy drop-in replacement. Replacement will allow you to get consistent file permission settings on Windows, macOS, and Linux:
If this is your Python code using `os.chmod()`:
```python
import os
os.chmod('myfile1', 'u+x')
os.chmod('myfile2', 0o777)
```
The replacement using ***oschmod*** is very similar:
```python
import oschmod
oschmod.set_mode('myfile1', 'u+x')
oschmod.set_mode('myfile2', 0o777)
```
## Changelog
### 0.3.0
**Commit Delta**: [Change from 0.2.4 release](https://github.com/YakDriver/oschmod/compare/0.2.4...0.3.0)
**Released**: 2020.05.27
**Summary**:
* Adds symbolic representation for mode changes (e.g., `+x`, `u+rwx`, `ugo-x`).
### 0.2.4
**Commit Delta**: [Change from 0.2.2 release](https://github.com/YakDriver/oschmod/compare/0.2.2...0.2.4)
**Released**: 2020.04.21
**Summary**:
* Add command line interface (CLI).
### 0.2.2
**Commit Delta**: [Change from 0.2.0 release](https://github.com/YakDriver/oschmod/compare/0.2.0...0.2.2)
**Released**: 2020.04.21
**Summary**:
* Fix issue with account lookup failing with error (`No mapping between account names and security IDs was done.`).
### 0.2.0
**Commit Delta**: [Change from 0.1.5 release](https://github.com/YakDriver/oschmod/compare/0.1.5...0.2.0)
**Released**: 2020.04.20
**Summary**:
* Add recursive version of `oschmod.set_mode()`: `oschmod.set_mode_recursive()`
### 0.1.5
**Commit Delta**: [Change from 0.1.4 release](https://github.com/YakDriver/oschmod/compare/0.1.4...0.1.5)
**Released**: 2020.04.17
**Summary**:
* Create Linux version of permissions test (`oschmod.perm_test()`)
### 0.1.4
**Commit Delta**: [Change from 0.1.0 release](https://github.com/YakDriver/oschmod/compare/0.1.0...0.1.4)
**Released**: 2020.04.17
**Summary**:
* Revise Windows to keep permissions an object already has for SYSTEM/NT AUTHORITY and don't include those permissions in mode calculation.
* Fix various minor cosmetic issues.
### 0.1.0
**Commit Delta**: [Change from 0.0.0 release](https://github.com/YakDriver/oschmod/compare/0.0.0...0.1.0)
**Released**: 2020.04.15
**Summary**:
* Initial release
%package help
Summary: Development documents and examples for oschmod
Provides: python3-oschmod-doc
%description help
# oschmod
***oschmod*** sets consistent file permissions across Windows, Linux and macOS.
## oschmod TL;DR
***oschmod*** brings `chmod` functionality to **Windows**, macOS, and Linux! If you're not familiar, `chmod` is a handy macOS and Linux-only tool for setting file permissions.
Prior to ***oschmod***, Windows file permissions couldn't be set in the familiar `chmod` way. Tools did not translate `chmod`-style permissions into Windows-style file permissions. Even though Python's `os.chmod()` sets read, write, and execute file permissions, on Windows, `os.chmod()` basically has no effect. Even worse, Python on Windows gives no warnings or errors. If you think you set file permissions on Windows with `os.chmod()`, you're wrong!
***oschmod*** allows you to set consistent file permissions in a consistent way across platforms.
* Read more about [oschmod](https://medium.com/@dirk.avery/securing-files-on-windows-macos-and-linux-7b2b9899992) on Medium
* For more background, have a look at the [oschmod Wiki](https://github.com/YakDriver/oschmod/wiki).
## Installation
```console
$ pip install oschmod
```
## GNU Documentation
***oschmod*** changes the file mode bits of each given file according to mode, which can be either a symbolic representation of changes to make, or an octal number representing the bit pattern for the new mode bits.
The format of a symbolic mode is `[ugoa...][+-=][perms...]` where perms is zero or more letters from the set `rwx`. Multiple symbolic modes can be given, separated by commas.
A combination of the letters `ugoa` controls which users' access to the file will be changed: the user who owns it (`u`), other users in the file's group (`g`), other users not in the file's group (`o`), or all users (`a`). If none of these are given, the effect is as if `a` were given.
*(Modified from the GNU manpage for chmod.)*
## Command line interface
***oschmod*** brings the ability to set consistent file permissions using the command line to Windows, macOS, and Linux platforms. If you are familiar with `chmod`, ***oschmod*** works similarly, albeit with fewer options.
```console
$ oschmod -h
usage: oschmod [-h] [-R] mode object
Change the mode (permissions) of a file or directory
positional arguments:
mode octal or symbolic mode of the object
object file or directory
optional arguments:
-h, --help show this help message and exit
-R apply mode recursively
```
## Command line examples
You can use symbolic (e.g., "u+rw") or octal (e.g., "600) representations of modes. Multiple mode modifications can be made in a single call by separating modifiers with commas.
### Symbolic representation examples
Symbolic representation mode modifiers have three parts:
1. **whom:** To whom does the modification apply? You can include zero or more of `[ugoa]*` where `a` is for all, `u` is for the file owner (i.e., "**u**ser"), `g` is for the file group, and `o` is for others. In other words, `ugo` is equivalent to `a`. Also, if you do not provide a "whom," ***oschmod*** assumes you mean `a` (everyone).
2. **operation:** Which operation should be applied? You must include one and only one operation, `[+-=]{1}`, per modifier (although you can have multiple modifiers). `+` adds permissions, `-` removes permissions, and `=` sets permissions regardless of previous permissions. `+` and `-` modifications often depend on the current permissions.
3. **permission:** Which permission or permissions will be affected? You can include zero or more of `[rwx]*` where `r` is for read, `w` is for write, and `x` is for execute. If you do not include a permission with `+` or `-` (e.g., `u-`), the modifier has no effect. However, if you use no permissions with `=` (e.g., `o=`), all permissions are removed.
**Example 1:** To give everyone execute permissions on a file (all of these are equivalent):
```console
$ oschmod +x
$ oschmod a+x
$ oschmod ugo+x
```
**Example 2:** To remove read, write, and execute permissions from the file group and all others (these are equivalent):
```console
$ oschmod go-rwx
$ oschmod go=
```
**Example 3:** To give the file owner read and execute permissions, and remove execute permissions from the group and all others:
```console
$ oschmod u+rx,go-x
```
**Example 4:** To give everyone all permissions, and then remove execute write from the group, and execute from all others:
```console
$ oschmod a+rwx,g-w,o-x
```
### Octal representation examples
For more about what octal representations mean, see [this article](https://medium.com/@dirk.avery/securing-files-on-windows-macos-and-linux-7b2b9899992) on Medium.
**Example 5:** To give everyone read, write, and execute permissions on a file:
```console
$ oschmod 777
```
**Example 6:** To lock down a file to just give the file owner read, write, and execute permissions and deny all permissions to everyone else:
```console
$ oschmod 700
```
## Python usage
You can use ***oschmod*** from Python code. Any of the command line examples above will work very similarly. For example, *Example 4* above, in Python code, would look like this:
```python
import oschmod
oschmod.set_mode("myfile", "a+rwx,g-w,o-x")
```
*Example 5* above, in Python code, could be done in two ways:
```python
import oschmod
oschmod.set_mode("myfile", "777")
oschmod.set_mode("myfile", 0o777)
```
***oschmod*** is compatible with bitwise permissions as defined in the `stat` module. To give a file's owner read, write, and execute permissions and deny the group and others any permissions (i.e., equivalent of `700`):
```python
import oschmod
import stat
oschmod.set_mode('myfile', stat.S_IRUSR | stat.S_IWUSR | stat.S_IXUSR)
```
Replacing `os.chmod()` with ***oschmod*** should usually be an easy drop-in replacement. Replacement will allow you to get consistent file permission settings on Windows, macOS, and Linux:
If this is your Python code using `os.chmod()`:
```python
import os
os.chmod('myfile1', 'u+x')
os.chmod('myfile2', 0o777)
```
The replacement using ***oschmod*** is very similar:
```python
import oschmod
oschmod.set_mode('myfile1', 'u+x')
oschmod.set_mode('myfile2', 0o777)
```
## Changelog
### 0.3.0
**Commit Delta**: [Change from 0.2.4 release](https://github.com/YakDriver/oschmod/compare/0.2.4...0.3.0)
**Released**: 2020.05.27
**Summary**:
* Adds symbolic representation for mode changes (e.g., `+x`, `u+rwx`, `ugo-x`).
### 0.2.4
**Commit Delta**: [Change from 0.2.2 release](https://github.com/YakDriver/oschmod/compare/0.2.2...0.2.4)
**Released**: 2020.04.21
**Summary**:
* Add command line interface (CLI).
### 0.2.2
**Commit Delta**: [Change from 0.2.0 release](https://github.com/YakDriver/oschmod/compare/0.2.0...0.2.2)
**Released**: 2020.04.21
**Summary**:
* Fix issue with account lookup failing with error (`No mapping between account names and security IDs was done.`).
### 0.2.0
**Commit Delta**: [Change from 0.1.5 release](https://github.com/YakDriver/oschmod/compare/0.1.5...0.2.0)
**Released**: 2020.04.20
**Summary**:
* Add recursive version of `oschmod.set_mode()`: `oschmod.set_mode_recursive()`
### 0.1.5
**Commit Delta**: [Change from 0.1.4 release](https://github.com/YakDriver/oschmod/compare/0.1.4...0.1.5)
**Released**: 2020.04.17
**Summary**:
* Create Linux version of permissions test (`oschmod.perm_test()`)
### 0.1.4
**Commit Delta**: [Change from 0.1.0 release](https://github.com/YakDriver/oschmod/compare/0.1.0...0.1.4)
**Released**: 2020.04.17
**Summary**:
* Revise Windows to keep permissions an object already has for SYSTEM/NT AUTHORITY and don't include those permissions in mode calculation.
* Fix various minor cosmetic issues.
### 0.1.0
**Commit Delta**: [Change from 0.0.0 release](https://github.com/YakDriver/oschmod/compare/0.0.0...0.1.0)
**Released**: 2020.04.15
**Summary**:
* Initial release
%prep
%autosetup -n oschmod-0.3.12
%build
%py3_build
%install
%py3_install
install -d -m755 %{buildroot}/%{_pkgdocdir}
if [ -d doc ]; then cp -arf doc %{buildroot}/%{_pkgdocdir}; fi
if [ -d docs ]; then cp -arf docs %{buildroot}/%{_pkgdocdir}; fi
if [ -d example ]; then cp -arf example %{buildroot}/%{_pkgdocdir}; fi
if [ -d examples ]; then cp -arf examples %{buildroot}/%{_pkgdocdir}; fi
pushd %{buildroot}
if [ -d usr/lib ]; then
find usr/lib -type f -printf "/%h/%f\n" >> filelist.lst
fi
if [ -d usr/lib64 ]; then
find usr/lib64 -type f -printf "/%h/%f\n" >> filelist.lst
fi
if [ -d usr/bin ]; then
find usr/bin -type f -printf "/%h/%f\n" >> filelist.lst
fi
if [ -d usr/sbin ]; then
find usr/sbin -type f -printf "/%h/%f\n" >> filelist.lst
fi
touch doclist.lst
if [ -d usr/share/man ]; then
find usr/share/man -type f -printf "/%h/%f.gz\n" >> doclist.lst
fi
popd
mv %{buildroot}/filelist.lst .
mv %{buildroot}/doclist.lst .
%files -n python3-oschmod -f filelist.lst
%dir %{python3_sitelib}/*
%files help -f doclist.lst
%{_docdir}/*
%changelog
* Tue Apr 25 2023 Python_Bot - 0.3.12-1
- Package Spec generated