%global _empty_manifest_terminate_build 0 Name: python-co2mpas Version: 4.3.4 Release: 1 Summary: The Type-Approving vehicle simulator predicting NEDC CO2 emissions from WLTP License: EUPL 1.1+ URL: https://github.com/JRCSTU/co2mpas-ta Source0: https://mirrors.nju.edu.cn/pypi/web/packages/a2/22/d3ed51b339fd2dc91184b2b344a4caf5e9f606eb7384069880c57bf9c628/co2mpas-4.3.4.tar.gz BuildArch: noarch Requires: python3-PyYAML Requires: python3-schedula Requires: python3-tqdm Requires: python3-scikit-learn Requires: python3-regex Requires: python3-lmfit Requires: python3-numpy Requires: python3-schema Requires: python3-scipy Requires: python3-wltp Requires: python3-xgboost Requires: python3-statsmodels Requires: python3-syncing Requires: python3-flask Requires: python3-syncing Requires: python3-dill Requires: python3-docutils Requires: python3-pandas Requires: python3-xlref Requires: python3-graphviz Requires: python3-click-log Requires: python3-click Requires: python3-asteval Requires: python3-co2mpas-dice Requires: python3-Pygments Requires: python3-jinja2 Requires: python3-xlrd Requires: python3-lxml Requires: python3-regex Requires: python3-plotly Requires: python3-beautifulsoup4 Requires: python3-click Requires: python3-click-log Requires: python3-flask Requires: python3-syncing Requires: python3-dill Requires: python3-docutils Requires: python3-pandas Requires: python3-xlref Requires: python3-graphviz Requires: python3-click-log Requires: python3-click Requires: python3-asteval Requires: python3-co2mpas-dice Requires: python3-Pygments Requires: python3-jinja2 Requires: python3-xlrd Requires: python3-lxml Requires: python3-regex Requires: python3-plotly Requires: python3-beautifulsoup4 Requires: python3-wheel Requires: python3-sphinx Requires: python3-gitchangelog Requires: python3-mako Requires: python3-sphinx-rtd-theme Requires: python3-setuptools Requires: python3-sphinxcontrib-restbuilder Requires: python3-nose Requires: python3-coveralls Requires: python3-ddt Requires: python3-sphinx-click Requires: python3-co2mpas-dice Requires: python3-pandas Requires: python3-dill Requires: python3-regex Requires: python3-xlref Requires: python3-xlrd Requires: python3-asteval Requires: python3-pandas Requires: python3-dill Requires: python3-regex Requires: python3-xlref Requires: python3-xlrd Requires: python3-asteval Requires: python3-flask Requires: python3-regex Requires: python3-graphviz Requires: python3-Pygments Requires: python3-lxml Requires: python3-beautifulsoup4 Requires: python3-jinja2 Requires: python3-docutils Requires: python3-plotly Requires: python3-syncing Requires: python3-pandas %description The *European Commission* has introduced the *WLTP* as the test procedure for the type I test of the European type-approval of Light-duty vehicles as of September 2017. Its introduction has required the adaptation of CO2 certification and monitoring procedures set by European regulations (443/2009, 510/2011, 1152/EUR/2017 and 1153/EUR/2017). European Commission’s *Joint Research Centre* (JRC) has been assigned the development of this vehicle simulator to facilitate this adaptation. The European Regulation setting the conditions for using CO2MPAS can be found in `the Comitology Register `_ after its adoption by the *Climate Change Committee* which took place on June 23, 2016, and its 2nd vote for modifications, in April 27, 2017. Installation ************ To install CO2MPAS use (with root privileges): $ pip install co2mpas Or download the latest git version and use (with root privileges): $ python setup.py install Some additional functionality is enabled installing the following extras: * ``cli``: enables the command line interface. * ``sync``: enables the time series synchronization tool (i.e., `syncing `_ previously named ``datasync``). * ``gui``: enables the graphical user interface. * ``plot``: enables to plot the CO2MPAS model and the workflow of each run. * ``io``: enables to read/write excel files. * ``driver``: enables the driver model (currently is not available). To install co2mpas and all extras, do: $ pip install 'co2mpas[all]' %package -n python3-co2mpas Summary: The Type-Approving vehicle simulator predicting NEDC CO2 emissions from WLTP Provides: python-co2mpas BuildRequires: python3-devel BuildRequires: python3-setuptools BuildRequires: python3-pip %description -n python3-co2mpas The *European Commission* has introduced the *WLTP* as the test procedure for the type I test of the European type-approval of Light-duty vehicles as of September 2017. Its introduction has required the adaptation of CO2 certification and monitoring procedures set by European regulations (443/2009, 510/2011, 1152/EUR/2017 and 1153/EUR/2017). European Commission’s *Joint Research Centre* (JRC) has been assigned the development of this vehicle simulator to facilitate this adaptation. The European Regulation setting the conditions for using CO2MPAS can be found in `the Comitology Register `_ after its adoption by the *Climate Change Committee* which took place on June 23, 2016, and its 2nd vote for modifications, in April 27, 2017. Installation ************ To install CO2MPAS use (with root privileges): $ pip install co2mpas Or download the latest git version and use (with root privileges): $ python setup.py install Some additional functionality is enabled installing the following extras: * ``cli``: enables the command line interface. * ``sync``: enables the time series synchronization tool (i.e., `syncing `_ previously named ``datasync``). * ``gui``: enables the graphical user interface. * ``plot``: enables to plot the CO2MPAS model and the workflow of each run. * ``io``: enables to read/write excel files. * ``driver``: enables the driver model (currently is not available). To install co2mpas and all extras, do: $ pip install 'co2mpas[all]' %package help Summary: Development documents and examples for co2mpas Provides: python3-co2mpas-doc %description help The *European Commission* has introduced the *WLTP* as the test procedure for the type I test of the European type-approval of Light-duty vehicles as of September 2017. Its introduction has required the adaptation of CO2 certification and monitoring procedures set by European regulations (443/2009, 510/2011, 1152/EUR/2017 and 1153/EUR/2017). European Commission’s *Joint Research Centre* (JRC) has been assigned the development of this vehicle simulator to facilitate this adaptation. The European Regulation setting the conditions for using CO2MPAS can be found in `the Comitology Register `_ after its adoption by the *Climate Change Committee* which took place on June 23, 2016, and its 2nd vote for modifications, in April 27, 2017. Installation ************ To install CO2MPAS use (with root privileges): $ pip install co2mpas Or download the latest git version and use (with root privileges): $ python setup.py install Some additional functionality is enabled installing the following extras: * ``cli``: enables the command line interface. * ``sync``: enables the time series synchronization tool (i.e., `syncing `_ previously named ``datasync``). * ``gui``: enables the graphical user interface. * ``plot``: enables to plot the CO2MPAS model and the workflow of each run. * ``io``: enables to read/write excel files. * ``driver``: enables the driver model (currently is not available). To install co2mpas and all extras, do: $ pip install 'co2mpas[all]' %prep %autosetup -n co2mpas-4.3.4 %build %py3_build %install %py3_install install -d -m755 %{buildroot}/%{_pkgdocdir} if [ -d doc ]; then cp -arf doc %{buildroot}/%{_pkgdocdir}; fi if [ -d docs ]; then cp -arf docs %{buildroot}/%{_pkgdocdir}; fi if [ -d example ]; then cp -arf example %{buildroot}/%{_pkgdocdir}; fi if [ -d examples ]; then cp -arf examples %{buildroot}/%{_pkgdocdir}; fi pushd %{buildroot} if [ -d usr/lib ]; then find usr/lib -type f -printf "/%h/%f\n" >> filelist.lst fi if [ -d usr/lib64 ]; then find usr/lib64 -type f -printf "/%h/%f\n" >> filelist.lst fi if [ -d usr/bin ]; then find usr/bin -type f -printf "/%h/%f\n" >> filelist.lst fi if [ -d usr/sbin ]; then find usr/sbin -type f -printf "/%h/%f\n" >> filelist.lst fi touch doclist.lst if [ -d usr/share/man ]; then find usr/share/man -type f -printf "/%h/%f.gz\n" >> doclist.lst fi popd mv %{buildroot}/filelist.lst . mv %{buildroot}/doclist.lst . %files -n python3-co2mpas -f filelist.lst %dir %{python3_sitelib}/* %files help -f doclist.lst %{_docdir}/* %changelog * Tue May 30 2023 Python_Bot - 4.3.4-1 - Package Spec generated