%global _empty_manifest_terminate_build 0 Name: python-sacn Version: 1.9.0 Release: 1 Summary: sACN / E1.31 module for easy handling of DMX data over ethernet License: MIT License URL: https://www.github.com/Hundemeier/sacn Source0: https://mirrors.aliyun.com/pypi/web/packages/2b/3a/5f7fa70575492ed6fbbf3cb2093059c6d38ae634cd96f3b6de0930720371/sacn-1.9.0.tar.gz BuildArch: noarch %description ## Usage ### Sending To use the sending functionality you have to use the `sACNsender`. ```python import sacn import time sender = sacn.sACNsender() # provide an IP-Address to bind to if you want to send multicast packets from a specific interface sender.start() # start the sending thread sender.activate_output(1) # start sending out data in the 1st universe sender[1].multicast = True # set multicast to True # sender[1].destination = "192.168.1.20" # or provide unicast information. # Keep in mind that if multicast is on, unicast is not used sender[1].dmx_data = (1, 2, 3, 4) # some test DMX data time.sleep(10) # send the data for 10 seconds sender.stop() # do not forget to stop the sender ``` You can activate an output universe via `activate_output()` and then change the attributes of this universe via `sender[].`. To deactivate an output use `deactivate_output()`. The output is terminated like the [E1.31][e1.31] describes it on page 14. If you want to flush manually and the sender thread should not send out automatic, use the `sACNsender.manual_flush` option. This is useful when you want to use a fixture that is using more than one universe and all the data on multiple universes should send out at the same time. Tip: you can get the activated outputs with `get_active_outputs()` and you can move an output with all its settings from one universe to another with `move_universe(, )`. Available Attributes for `sender[].` are: * `destination: str`: the unicast destination as string. (eg "192.168.1.150") Default: "127.0.0.1" * `multicast: bool`: set whether to send out via multicast or not. Default: False If True the data is send out via multicast and not unicast. * `ttl: int`: the time-to-live for the packets that are send out via multicast on this universe. Default: 8 * `priority: int`: (must be between 0-200) the priority for this universe that is send out. If multiple sources in a network are sending to the same receiver the data with the highest priority wins. Default: 100 * `preview_data: bool`: Flag to mark the data as preview data for visualization purposes. Default: False * `dmx_data: tuple`: the DMX data as a tuple. Max length is 512 and for legacy devices all data that is smaller than 512 is merged to a 512 length tuple with 0 as filler value. The values in the tuple have to be [0-255]! `sACNsender` Creates a sender object. A sender is used to manage multiple sACN universes and handles their output. DMX data is send out every second, when no data changes. Some changes may be not send out, because the fps setting defines how often packets are send out to prevent network overuse. So if you change the DMX values too often in a second they may not all been send. Vary the fps parameter to your needs (Default=30). * `bind_address: str`: the IP-Address to bind to. Provide an IP-Address to bind to if you want to send multicast packets from a specific interface. * `bind_port: int`: optionally bind to a specific port. Default=5568. It is not recommended to change the port. Change the port number if you have trouble with another program or the sACNreceiver blocking the port * `source_name: str`: the source name used in the sACN packets. See the [standard][e1.31] for more information. * `cid: tuple`: the cid. If not given, a random CID will be generated. See the [standard][e1.31] for more information. * `fps: int` the frames per second. See explanation above. Has to be >0. Default: 30 * `universeDiscovery: bool` if true, universe discovery messages are send out via broadcast every 10s. Default: True * `sync_universe: int` set a specific universe used in the sync-packets. Default: 63999 When manually flushed, the E1.31 sync feature is used. So all universe data is send out, and after all data was send out a sync packet is send to all receivers and then they are allowed to display the received data. Note that not all receiver implemented this feature of the sACN protocol. Example for the usage of the manual_flush: ```python import sacn import time sender = sacn.sACNsender() sender.start() sender.activate_output(1) sender.activate_output(2) sender[1].multicast = True sender[2].multicast = True sender.manual_flush = True # turning off the automatic sending of packets sender[1].dmx_data = (1, 2, 3, 4) # some test DMX data sender[2].dmx_data = (5, 6, 7, 8) # by the time we are here, the above data would be already send out, # if manual_flush would be False. This could cause some jitter # so instead we are flushing manual time.sleep(1) # let the sender initialize itself sender.flush() sender.manual_flush = False # keep manual flush off as long as possible, because if it is on, the automatic # sending of packets is turned off and that is not recommended sender.stop() # stop sending out ``` ### Receiving To use the receiving functionality you have to use the `sACNreceiver`. ```python import sacn import time # provide an IP-Address to bind to if you want to send multicast packets from a specific interface receiver = sacn.sACNreceiver() receiver.start() # start the receiving thread # define a callback function @receiver.listen_on('universe', universe=1) # listens on universe 1 def callback(packet): # packet type: sacn.DataPacket print(packet.dmxData) # print the received DMX data # optional: if multicast is desired, join with the universe number as parameter receiver.join_multicast(1) time.sleep(10) # receive for 10 seconds # optional: if multicast was previously joined receiver.leave_multicast(1) receiver.stop() ``` The usage of the receiver is way more simple than the sender. The `sACNreceiver` can be initialized with the following parameters: * `bind_address: str`: Provide an IP-Address to bind to if you want to receive multicast packets from a specific interface. * `bind_port: int`: Default: 5568. It is not recommended to change this value! Only use when you are know what you are doing! Please keep in mind to not use the callbacks for time consuming tasks! If you do this, then the receiver can not react fast enough on incoming messages! Functions: * `join_multicast()`: joins the multicast group for the specific universe. * `leave_multicast()`: leave the multicast group specified by the universe. * `get_possible_universes()`: Returns a tuple with all universes that have sources that are sending out data and this data is received by this machine * `register_listener(, , **kwargs)`: register a listener for the given trigger. You can also use the decorator `listen_on(, **kwargs)`. Possible trigger so far: * `availability`: gets called when there is no data for a universe anymore or there is now data available. This gets also fired if a source terminates a stream via the stream_termination bit. The callback should get two arguments: `callback(universe, changed)` * `universe: int`: is the universe where the action happened * `changed: str`: can be 'timeout' or 'available' * `universe`: registers a listener for the given universe. The callback gets only one parameter, the DataPacket. You can also use the decorator `@listen_on('universe', universe=)`. The callback should have one argument: `callback(packet)` * `packet: DataPacket`: the received DataPacket with all information * `remove_listener()`: removes a previously registered listener regardless of the trigger. This means a listener can only be removed completely, even if it was listening to multiple universes. If the function never was registered, nothing happens. Note: if a function was registered multiple times, this remove function needs to be called only once. * `remove_listener_from_universe()`: removes all listeners from the given universe. This does only have effect on the 'universe' listening trigger. If no function was registered for this universe, nothing happens. ### DataPacket This is an abstract representation of an sACN Data packet that carries the DMX data. This class is used internally by the module and is used in the callbacks of the receiver. The DataPacket provides following attributes: * `sourceName: str`: a string that is used to identify the source. Only the first 64 bytes are used. * `priority: int`: the priority used to manage multiple DMX data on one receiver. [1-200] Default: 100 * `universe: int`: the universe for the whole message and its DMX data. [1-63999] * `sequence: int`: the sequence number. Should increment for every new message and can be used to check for wrong order of arriving packets. * `option_StreamTerminated: bool`: True if this packet is the last one of the stream for the given universe. * `option_PreviewData: bool`: True if this data is for visualization purposes. * `option_ForceSync: bool`: True if this should only function in a synchronized state. * `dmxStartCode: int`: the start code for the data tuple. [1-255] Default: 0x00 for streaming level data. See [Alternate START Codes](https://tsp.esta.org/tsp/working_groups/CP/DMXAlternateCodes.php) for more information. * `dmxData: tuple`: the DMX data as tuple. Max length is 512 and shorter tuples getting normalized to a length of 512. Filled with 0 for empty spaces. ## Development Some tools are used to help with development of this library. These are [flake8](https://flake8.pycqa.org), [pytest](https://pytest.org) and [coverage.py](https://coverage.readthedocs.io). Install those tools with pip: ``` pip install flake8 pytest pytest-timeout coverage ``` `flake8` checks for formatting issues and can be run with `flake8` or `python -m flake8` in the root directory of this repository. `pytest` is used for unit testing and can be executed with `pytest` or `python -m pytest` in the root directory of this repository. By default, this skips the integration test, which uses real hardware I/O and might not run in every configuration. Use the flag `--run-integration-tests` to run the additional tests (e.g. `python -m pytest --run-integration-tests`) It is useful to check if the test coverage changed with `coverage run -m pytest` and then `coverage html`, which generates a `htmlcov/index.html` file with all the information. ### Changelog * 1.9.0: The behavior of multicast sending and receiving is now unified across most operating systems. This means Windows no longer requires to set a `bind_address` to be able to use multicast or universe discovery. (Thanks to mthespian! See #42 for more information) * 1.8.1: Calling `stop` on a sender or receiver now closes the underlying socket too. Note: after stopping a sender or receiver, it can not be started again with `start`. (See #39 for more information) * 1.8.0: Added function for removing a listener on a receiver by universe. See `sACNreceiver.remove_listener_from_universe()` for more information. * 1.7.1: Small changes that might improve timing on the sender. (Thanks to mthespian! See #36 for more information) * 1.7.0: Added function for removing a listener on a receiver. See `sACNreceiver.remove_listener()` for more information. * 1.6.4: Functionality related to sending of sACN data is now mostly covered by tests. Removed undocumented parameters for `sACNsender.start()`. * 1.6.3: Functionality related to receiving sACN data is now mostly covered by tests. Fixed a bug, where an exception was thrown on the first `DataPacket` when the stream-termination option was set. (Additional thanks to mthespian! See #31 for more information) * 1.6.2: Test coverage of sub-module `messages` is now 100%. Fixed a bug where a too long source name did not throw an exception. Fixed a bug where invalid DMX data could be set on the `DataPacket`. (Thanks to mthespian! See #30 for more information) * 1.6.1: Fixed a bug, where the DMX start code was not set on received packets (Thanks to mthespian! See #29 for more information) * 1.6: Added dmxStartCode property to DataPacket (Thanks to mthespian! see #27 for more information) * 1.5: Performance improvement: Deleted debugging statements in hot path of packet sending and receiving (Thanks to shauneccles! See #25 for more information) * 1.4.6: Fix: When creating a DataPacket with invalid DMX start codes (i.e. not `0x00`) an exception is thrown (Thanks to niggiover9000! See #11 for more information) * 1.4.5: When using a manual flush, only a specified list of universes can be flushed (Thanks to CrazyIvan359! See #22 for more information) * 1.4.4: The universe used for the sACN-sync messages can now be set when creating a `sACNsender` (Thanks to CrazyIvan359! See #21 for more information) * 1.4.3: The sequence number of the sync-packet when using manual flush was not increased (Thanks to @BlakeGarner ! See #19 for more information) * 1.4.2: The internal logging of the receiver_thread and output_thread was using the root logger instead of its module-logger. (Thanks to @mje-nz ! See #18 for more information) * 1.4: Added a manual flush feature for sending out all universes at the same time. Thanks to ahodges9 for the idea. [e1.31]: http://tsp.esta.org/tsp/documents/docs/E1-31-2016.pdf %package -n python3-sacn Summary: sACN / E1.31 module for easy handling of DMX data over ethernet Provides: python-sacn BuildRequires: python3-devel BuildRequires: python3-setuptools BuildRequires: python3-pip %description -n python3-sacn ## Usage ### Sending To use the sending functionality you have to use the `sACNsender`. ```python import sacn import time sender = sacn.sACNsender() # provide an IP-Address to bind to if you want to send multicast packets from a specific interface sender.start() # start the sending thread sender.activate_output(1) # start sending out data in the 1st universe sender[1].multicast = True # set multicast to True # sender[1].destination = "192.168.1.20" # or provide unicast information. # Keep in mind that if multicast is on, unicast is not used sender[1].dmx_data = (1, 2, 3, 4) # some test DMX data time.sleep(10) # send the data for 10 seconds sender.stop() # do not forget to stop the sender ``` You can activate an output universe via `activate_output()` and then change the attributes of this universe via `sender[].`. To deactivate an output use `deactivate_output()`. The output is terminated like the [E1.31][e1.31] describes it on page 14. If you want to flush manually and the sender thread should not send out automatic, use the `sACNsender.manual_flush` option. This is useful when you want to use a fixture that is using more than one universe and all the data on multiple universes should send out at the same time. Tip: you can get the activated outputs with `get_active_outputs()` and you can move an output with all its settings from one universe to another with `move_universe(, )`. Available Attributes for `sender[].` are: * `destination: str`: the unicast destination as string. (eg "192.168.1.150") Default: "127.0.0.1" * `multicast: bool`: set whether to send out via multicast or not. Default: False If True the data is send out via multicast and not unicast. * `ttl: int`: the time-to-live for the packets that are send out via multicast on this universe. Default: 8 * `priority: int`: (must be between 0-200) the priority for this universe that is send out. If multiple sources in a network are sending to the same receiver the data with the highest priority wins. Default: 100 * `preview_data: bool`: Flag to mark the data as preview data for visualization purposes. Default: False * `dmx_data: tuple`: the DMX data as a tuple. Max length is 512 and for legacy devices all data that is smaller than 512 is merged to a 512 length tuple with 0 as filler value. The values in the tuple have to be [0-255]! `sACNsender` Creates a sender object. A sender is used to manage multiple sACN universes and handles their output. DMX data is send out every second, when no data changes. Some changes may be not send out, because the fps setting defines how often packets are send out to prevent network overuse. So if you change the DMX values too often in a second they may not all been send. Vary the fps parameter to your needs (Default=30). * `bind_address: str`: the IP-Address to bind to. Provide an IP-Address to bind to if you want to send multicast packets from a specific interface. * `bind_port: int`: optionally bind to a specific port. Default=5568. It is not recommended to change the port. Change the port number if you have trouble with another program or the sACNreceiver blocking the port * `source_name: str`: the source name used in the sACN packets. See the [standard][e1.31] for more information. * `cid: tuple`: the cid. If not given, a random CID will be generated. See the [standard][e1.31] for more information. * `fps: int` the frames per second. See explanation above. Has to be >0. Default: 30 * `universeDiscovery: bool` if true, universe discovery messages are send out via broadcast every 10s. Default: True * `sync_universe: int` set a specific universe used in the sync-packets. Default: 63999 When manually flushed, the E1.31 sync feature is used. So all universe data is send out, and after all data was send out a sync packet is send to all receivers and then they are allowed to display the received data. Note that not all receiver implemented this feature of the sACN protocol. Example for the usage of the manual_flush: ```python import sacn import time sender = sacn.sACNsender() sender.start() sender.activate_output(1) sender.activate_output(2) sender[1].multicast = True sender[2].multicast = True sender.manual_flush = True # turning off the automatic sending of packets sender[1].dmx_data = (1, 2, 3, 4) # some test DMX data sender[2].dmx_data = (5, 6, 7, 8) # by the time we are here, the above data would be already send out, # if manual_flush would be False. This could cause some jitter # so instead we are flushing manual time.sleep(1) # let the sender initialize itself sender.flush() sender.manual_flush = False # keep manual flush off as long as possible, because if it is on, the automatic # sending of packets is turned off and that is not recommended sender.stop() # stop sending out ``` ### Receiving To use the receiving functionality you have to use the `sACNreceiver`. ```python import sacn import time # provide an IP-Address to bind to if you want to send multicast packets from a specific interface receiver = sacn.sACNreceiver() receiver.start() # start the receiving thread # define a callback function @receiver.listen_on('universe', universe=1) # listens on universe 1 def callback(packet): # packet type: sacn.DataPacket print(packet.dmxData) # print the received DMX data # optional: if multicast is desired, join with the universe number as parameter receiver.join_multicast(1) time.sleep(10) # receive for 10 seconds # optional: if multicast was previously joined receiver.leave_multicast(1) receiver.stop() ``` The usage of the receiver is way more simple than the sender. The `sACNreceiver` can be initialized with the following parameters: * `bind_address: str`: Provide an IP-Address to bind to if you want to receive multicast packets from a specific interface. * `bind_port: int`: Default: 5568. It is not recommended to change this value! Only use when you are know what you are doing! Please keep in mind to not use the callbacks for time consuming tasks! If you do this, then the receiver can not react fast enough on incoming messages! Functions: * `join_multicast()`: joins the multicast group for the specific universe. * `leave_multicast()`: leave the multicast group specified by the universe. * `get_possible_universes()`: Returns a tuple with all universes that have sources that are sending out data and this data is received by this machine * `register_listener(, , **kwargs)`: register a listener for the given trigger. You can also use the decorator `listen_on(, **kwargs)`. Possible trigger so far: * `availability`: gets called when there is no data for a universe anymore or there is now data available. This gets also fired if a source terminates a stream via the stream_termination bit. The callback should get two arguments: `callback(universe, changed)` * `universe: int`: is the universe where the action happened * `changed: str`: can be 'timeout' or 'available' * `universe`: registers a listener for the given universe. The callback gets only one parameter, the DataPacket. You can also use the decorator `@listen_on('universe', universe=)`. The callback should have one argument: `callback(packet)` * `packet: DataPacket`: the received DataPacket with all information * `remove_listener()`: removes a previously registered listener regardless of the trigger. This means a listener can only be removed completely, even if it was listening to multiple universes. If the function never was registered, nothing happens. Note: if a function was registered multiple times, this remove function needs to be called only once. * `remove_listener_from_universe()`: removes all listeners from the given universe. This does only have effect on the 'universe' listening trigger. If no function was registered for this universe, nothing happens. ### DataPacket This is an abstract representation of an sACN Data packet that carries the DMX data. This class is used internally by the module and is used in the callbacks of the receiver. The DataPacket provides following attributes: * `sourceName: str`: a string that is used to identify the source. Only the first 64 bytes are used. * `priority: int`: the priority used to manage multiple DMX data on one receiver. [1-200] Default: 100 * `universe: int`: the universe for the whole message and its DMX data. [1-63999] * `sequence: int`: the sequence number. Should increment for every new message and can be used to check for wrong order of arriving packets. * `option_StreamTerminated: bool`: True if this packet is the last one of the stream for the given universe. * `option_PreviewData: bool`: True if this data is for visualization purposes. * `option_ForceSync: bool`: True if this should only function in a synchronized state. * `dmxStartCode: int`: the start code for the data tuple. [1-255] Default: 0x00 for streaming level data. See [Alternate START Codes](https://tsp.esta.org/tsp/working_groups/CP/DMXAlternateCodes.php) for more information. * `dmxData: tuple`: the DMX data as tuple. Max length is 512 and shorter tuples getting normalized to a length of 512. Filled with 0 for empty spaces. ## Development Some tools are used to help with development of this library. These are [flake8](https://flake8.pycqa.org), [pytest](https://pytest.org) and [coverage.py](https://coverage.readthedocs.io). Install those tools with pip: ``` pip install flake8 pytest pytest-timeout coverage ``` `flake8` checks for formatting issues and can be run with `flake8` or `python -m flake8` in the root directory of this repository. `pytest` is used for unit testing and can be executed with `pytest` or `python -m pytest` in the root directory of this repository. By default, this skips the integration test, which uses real hardware I/O and might not run in every configuration. Use the flag `--run-integration-tests` to run the additional tests (e.g. `python -m pytest --run-integration-tests`) It is useful to check if the test coverage changed with `coverage run -m pytest` and then `coverage html`, which generates a `htmlcov/index.html` file with all the information. ### Changelog * 1.9.0: The behavior of multicast sending and receiving is now unified across most operating systems. This means Windows no longer requires to set a `bind_address` to be able to use multicast or universe discovery. (Thanks to mthespian! See #42 for more information) * 1.8.1: Calling `stop` on a sender or receiver now closes the underlying socket too. Note: after stopping a sender or receiver, it can not be started again with `start`. (See #39 for more information) * 1.8.0: Added function for removing a listener on a receiver by universe. See `sACNreceiver.remove_listener_from_universe()` for more information. * 1.7.1: Small changes that might improve timing on the sender. (Thanks to mthespian! See #36 for more information) * 1.7.0: Added function for removing a listener on a receiver. See `sACNreceiver.remove_listener()` for more information. * 1.6.4: Functionality related to sending of sACN data is now mostly covered by tests. Removed undocumented parameters for `sACNsender.start()`. * 1.6.3: Functionality related to receiving sACN data is now mostly covered by tests. Fixed a bug, where an exception was thrown on the first `DataPacket` when the stream-termination option was set. (Additional thanks to mthespian! See #31 for more information) * 1.6.2: Test coverage of sub-module `messages` is now 100%. Fixed a bug where a too long source name did not throw an exception. Fixed a bug where invalid DMX data could be set on the `DataPacket`. (Thanks to mthespian! See #30 for more information) * 1.6.1: Fixed a bug, where the DMX start code was not set on received packets (Thanks to mthespian! See #29 for more information) * 1.6: Added dmxStartCode property to DataPacket (Thanks to mthespian! see #27 for more information) * 1.5: Performance improvement: Deleted debugging statements in hot path of packet sending and receiving (Thanks to shauneccles! See #25 for more information) * 1.4.6: Fix: When creating a DataPacket with invalid DMX start codes (i.e. not `0x00`) an exception is thrown (Thanks to niggiover9000! See #11 for more information) * 1.4.5: When using a manual flush, only a specified list of universes can be flushed (Thanks to CrazyIvan359! See #22 for more information) * 1.4.4: The universe used for the sACN-sync messages can now be set when creating a `sACNsender` (Thanks to CrazyIvan359! See #21 for more information) * 1.4.3: The sequence number of the sync-packet when using manual flush was not increased (Thanks to @BlakeGarner ! See #19 for more information) * 1.4.2: The internal logging of the receiver_thread and output_thread was using the root logger instead of its module-logger. (Thanks to @mje-nz ! See #18 for more information) * 1.4: Added a manual flush feature for sending out all universes at the same time. Thanks to ahodges9 for the idea. [e1.31]: http://tsp.esta.org/tsp/documents/docs/E1-31-2016.pdf %package help Summary: Development documents and examples for sacn Provides: python3-sacn-doc %description help ## Usage ### Sending To use the sending functionality you have to use the `sACNsender`. ```python import sacn import time sender = sacn.sACNsender() # provide an IP-Address to bind to if you want to send multicast packets from a specific interface sender.start() # start the sending thread sender.activate_output(1) # start sending out data in the 1st universe sender[1].multicast = True # set multicast to True # sender[1].destination = "192.168.1.20" # or provide unicast information. # Keep in mind that if multicast is on, unicast is not used sender[1].dmx_data = (1, 2, 3, 4) # some test DMX data time.sleep(10) # send the data for 10 seconds sender.stop() # do not forget to stop the sender ``` You can activate an output universe via `activate_output()` and then change the attributes of this universe via `sender[].`. To deactivate an output use `deactivate_output()`. The output is terminated like the [E1.31][e1.31] describes it on page 14. If you want to flush manually and the sender thread should not send out automatic, use the `sACNsender.manual_flush` option. This is useful when you want to use a fixture that is using more than one universe and all the data on multiple universes should send out at the same time. Tip: you can get the activated outputs with `get_active_outputs()` and you can move an output with all its settings from one universe to another with `move_universe(, )`. Available Attributes for `sender[].` are: * `destination: str`: the unicast destination as string. (eg "192.168.1.150") Default: "127.0.0.1" * `multicast: bool`: set whether to send out via multicast or not. Default: False If True the data is send out via multicast and not unicast. * `ttl: int`: the time-to-live for the packets that are send out via multicast on this universe. Default: 8 * `priority: int`: (must be between 0-200) the priority for this universe that is send out. If multiple sources in a network are sending to the same receiver the data with the highest priority wins. Default: 100 * `preview_data: bool`: Flag to mark the data as preview data for visualization purposes. Default: False * `dmx_data: tuple`: the DMX data as a tuple. Max length is 512 and for legacy devices all data that is smaller than 512 is merged to a 512 length tuple with 0 as filler value. The values in the tuple have to be [0-255]! `sACNsender` Creates a sender object. A sender is used to manage multiple sACN universes and handles their output. DMX data is send out every second, when no data changes. Some changes may be not send out, because the fps setting defines how often packets are send out to prevent network overuse. So if you change the DMX values too often in a second they may not all been send. Vary the fps parameter to your needs (Default=30). * `bind_address: str`: the IP-Address to bind to. Provide an IP-Address to bind to if you want to send multicast packets from a specific interface. * `bind_port: int`: optionally bind to a specific port. Default=5568. It is not recommended to change the port. Change the port number if you have trouble with another program or the sACNreceiver blocking the port * `source_name: str`: the source name used in the sACN packets. See the [standard][e1.31] for more information. * `cid: tuple`: the cid. If not given, a random CID will be generated. See the [standard][e1.31] for more information. * `fps: int` the frames per second. See explanation above. Has to be >0. Default: 30 * `universeDiscovery: bool` if true, universe discovery messages are send out via broadcast every 10s. Default: True * `sync_universe: int` set a specific universe used in the sync-packets. Default: 63999 When manually flushed, the E1.31 sync feature is used. So all universe data is send out, and after all data was send out a sync packet is send to all receivers and then they are allowed to display the received data. Note that not all receiver implemented this feature of the sACN protocol. Example for the usage of the manual_flush: ```python import sacn import time sender = sacn.sACNsender() sender.start() sender.activate_output(1) sender.activate_output(2) sender[1].multicast = True sender[2].multicast = True sender.manual_flush = True # turning off the automatic sending of packets sender[1].dmx_data = (1, 2, 3, 4) # some test DMX data sender[2].dmx_data = (5, 6, 7, 8) # by the time we are here, the above data would be already send out, # if manual_flush would be False. This could cause some jitter # so instead we are flushing manual time.sleep(1) # let the sender initialize itself sender.flush() sender.manual_flush = False # keep manual flush off as long as possible, because if it is on, the automatic # sending of packets is turned off and that is not recommended sender.stop() # stop sending out ``` ### Receiving To use the receiving functionality you have to use the `sACNreceiver`. ```python import sacn import time # provide an IP-Address to bind to if you want to send multicast packets from a specific interface receiver = sacn.sACNreceiver() receiver.start() # start the receiving thread # define a callback function @receiver.listen_on('universe', universe=1) # listens on universe 1 def callback(packet): # packet type: sacn.DataPacket print(packet.dmxData) # print the received DMX data # optional: if multicast is desired, join with the universe number as parameter receiver.join_multicast(1) time.sleep(10) # receive for 10 seconds # optional: if multicast was previously joined receiver.leave_multicast(1) receiver.stop() ``` The usage of the receiver is way more simple than the sender. The `sACNreceiver` can be initialized with the following parameters: * `bind_address: str`: Provide an IP-Address to bind to if you want to receive multicast packets from a specific interface. * `bind_port: int`: Default: 5568. It is not recommended to change this value! Only use when you are know what you are doing! Please keep in mind to not use the callbacks for time consuming tasks! If you do this, then the receiver can not react fast enough on incoming messages! Functions: * `join_multicast()`: joins the multicast group for the specific universe. * `leave_multicast()`: leave the multicast group specified by the universe. * `get_possible_universes()`: Returns a tuple with all universes that have sources that are sending out data and this data is received by this machine * `register_listener(, , **kwargs)`: register a listener for the given trigger. You can also use the decorator `listen_on(, **kwargs)`. Possible trigger so far: * `availability`: gets called when there is no data for a universe anymore or there is now data available. This gets also fired if a source terminates a stream via the stream_termination bit. The callback should get two arguments: `callback(universe, changed)` * `universe: int`: is the universe where the action happened * `changed: str`: can be 'timeout' or 'available' * `universe`: registers a listener for the given universe. The callback gets only one parameter, the DataPacket. You can also use the decorator `@listen_on('universe', universe=)`. The callback should have one argument: `callback(packet)` * `packet: DataPacket`: the received DataPacket with all information * `remove_listener()`: removes a previously registered listener regardless of the trigger. This means a listener can only be removed completely, even if it was listening to multiple universes. If the function never was registered, nothing happens. Note: if a function was registered multiple times, this remove function needs to be called only once. * `remove_listener_from_universe()`: removes all listeners from the given universe. This does only have effect on the 'universe' listening trigger. If no function was registered for this universe, nothing happens. ### DataPacket This is an abstract representation of an sACN Data packet that carries the DMX data. This class is used internally by the module and is used in the callbacks of the receiver. The DataPacket provides following attributes: * `sourceName: str`: a string that is used to identify the source. Only the first 64 bytes are used. * `priority: int`: the priority used to manage multiple DMX data on one receiver. [1-200] Default: 100 * `universe: int`: the universe for the whole message and its DMX data. [1-63999] * `sequence: int`: the sequence number. Should increment for every new message and can be used to check for wrong order of arriving packets. * `option_StreamTerminated: bool`: True if this packet is the last one of the stream for the given universe. * `option_PreviewData: bool`: True if this data is for visualization purposes. * `option_ForceSync: bool`: True if this should only function in a synchronized state. * `dmxStartCode: int`: the start code for the data tuple. [1-255] Default: 0x00 for streaming level data. See [Alternate START Codes](https://tsp.esta.org/tsp/working_groups/CP/DMXAlternateCodes.php) for more information. * `dmxData: tuple`: the DMX data as tuple. Max length is 512 and shorter tuples getting normalized to a length of 512. Filled with 0 for empty spaces. ## Development Some tools are used to help with development of this library. These are [flake8](https://flake8.pycqa.org), [pytest](https://pytest.org) and [coverage.py](https://coverage.readthedocs.io). Install those tools with pip: ``` pip install flake8 pytest pytest-timeout coverage ``` `flake8` checks for formatting issues and can be run with `flake8` or `python -m flake8` in the root directory of this repository. `pytest` is used for unit testing and can be executed with `pytest` or `python -m pytest` in the root directory of this repository. By default, this skips the integration test, which uses real hardware I/O and might not run in every configuration. Use the flag `--run-integration-tests` to run the additional tests (e.g. `python -m pytest --run-integration-tests`) It is useful to check if the test coverage changed with `coverage run -m pytest` and then `coverage html`, which generates a `htmlcov/index.html` file with all the information. ### Changelog * 1.9.0: The behavior of multicast sending and receiving is now unified across most operating systems. This means Windows no longer requires to set a `bind_address` to be able to use multicast or universe discovery. (Thanks to mthespian! See #42 for more information) * 1.8.1: Calling `stop` on a sender or receiver now closes the underlying socket too. Note: after stopping a sender or receiver, it can not be started again with `start`. (See #39 for more information) * 1.8.0: Added function for removing a listener on a receiver by universe. See `sACNreceiver.remove_listener_from_universe()` for more information. * 1.7.1: Small changes that might improve timing on the sender. (Thanks to mthespian! See #36 for more information) * 1.7.0: Added function for removing a listener on a receiver. See `sACNreceiver.remove_listener()` for more information. * 1.6.4: Functionality related to sending of sACN data is now mostly covered by tests. Removed undocumented parameters for `sACNsender.start()`. * 1.6.3: Functionality related to receiving sACN data is now mostly covered by tests. Fixed a bug, where an exception was thrown on the first `DataPacket` when the stream-termination option was set. (Additional thanks to mthespian! See #31 for more information) * 1.6.2: Test coverage of sub-module `messages` is now 100%. Fixed a bug where a too long source name did not throw an exception. Fixed a bug where invalid DMX data could be set on the `DataPacket`. (Thanks to mthespian! See #30 for more information) * 1.6.1: Fixed a bug, where the DMX start code was not set on received packets (Thanks to mthespian! See #29 for more information) * 1.6: Added dmxStartCode property to DataPacket (Thanks to mthespian! see #27 for more information) * 1.5: Performance improvement: Deleted debugging statements in hot path of packet sending and receiving (Thanks to shauneccles! See #25 for more information) * 1.4.6: Fix: When creating a DataPacket with invalid DMX start codes (i.e. not `0x00`) an exception is thrown (Thanks to niggiover9000! See #11 for more information) * 1.4.5: When using a manual flush, only a specified list of universes can be flushed (Thanks to CrazyIvan359! See #22 for more information) * 1.4.4: The universe used for the sACN-sync messages can now be set when creating a `sACNsender` (Thanks to CrazyIvan359! See #21 for more information) * 1.4.3: The sequence number of the sync-packet when using manual flush was not increased (Thanks to @BlakeGarner ! See #19 for more information) * 1.4.2: The internal logging of the receiver_thread and output_thread was using the root logger instead of its module-logger. (Thanks to @mje-nz ! See #18 for more information) * 1.4: Added a manual flush feature for sending out all universes at the same time. Thanks to ahodges9 for the idea. [e1.31]: http://tsp.esta.org/tsp/documents/docs/E1-31-2016.pdf %prep %autosetup -n sacn-1.9.0 %build %py3_build %install %py3_install install -d -m755 %{buildroot}/%{_pkgdocdir} if [ -d doc ]; then cp -arf doc %{buildroot}/%{_pkgdocdir}; fi if [ -d docs ]; then cp -arf docs %{buildroot}/%{_pkgdocdir}; fi if [ -d example ]; then cp -arf example %{buildroot}/%{_pkgdocdir}; fi if [ -d examples ]; then cp -arf examples %{buildroot}/%{_pkgdocdir}; fi pushd %{buildroot} if [ -d usr/lib ]; then find usr/lib -type f -printf "\"/%h/%f\"\n" >> filelist.lst fi if [ -d usr/lib64 ]; then find usr/lib64 -type f -printf "\"/%h/%f\"\n" >> filelist.lst fi if [ -d usr/bin ]; then find usr/bin -type f -printf "\"/%h/%f\"\n" >> filelist.lst fi if [ -d usr/sbin ]; then find usr/sbin -type f -printf "\"/%h/%f\"\n" >> filelist.lst fi touch doclist.lst if [ -d usr/share/man ]; then find usr/share/man -type f -printf "\"/%h/%f.gz\"\n" >> doclist.lst fi popd mv %{buildroot}/filelist.lst . mv %{buildroot}/doclist.lst . %files -n python3-sacn -f filelist.lst %dir %{python3_sitelib}/* %files help -f doclist.lst %{_docdir}/* %changelog * Thu Jun 08 2023 Python_Bot - 1.9.0-1 - Package Spec generated