%global _empty_manifest_terminate_build 0 Name: python-OctoPrint-FirmwareCheck Version: 2021.10.11 Release: 1 Summary: Checks for unsafe or broken printer firmwares License: AGPLv3 URL: https://github.com/OctoPrint/OctoPrint-FirmwareCheck Source0: https://mirrors.nju.edu.cn/pypi/web/packages/db/31/fe4ddb176b5de9930278a72ed15fdfc57470066c000f23c6fdd056bbcd8b/OctoPrint-FirmwareCheck-2021.10.11.tar.gz BuildArch: noarch Requires: python3-pre-commit %description # Firmware Check The Firmware Check plugin tries to identify printers or rather printer firmware with known safety issues, such as disabled thermal runaway protection, or other kinds of severe issues, like known communication crippling bugs, and displays a warning box to logged in users on identification of such a firmware. ![Screenshot of two warnings](https://raw.githubusercontent.com/OctoPrint/OctoPrint-FirmwareCheck/master/extras/screenshot.png) Since version 2021-2-4 it also displays info/"heads-ups" messages if a development firmware build is detected. This kind of message can be disabled. ![Screenshot of an info](https://raw.githubusercontent.com/OctoPrint/OctoPrint-FirmwareCheck/master/extras/screenshot2.png) It was formerly called "Printer Safety Check" and used to be bundled with OctoPrint since version 1.3.7. It was unbundled in 1.4.1 and turned into an install dependency to allow for a separate release cycle. It is still considered a core plugin of OctoPrint, treated as if bundled and thus also active in [safe mode](https://docs.octoprint.org/en/master/features/safemode.html). ## Setup The plugin is part of the core dependencies of OctoPrint 1.4.1+ and will be installed automatically alongside it. In case you want to manually install it into an older version for whatever reason, install via the bundled [Plugin Manager](https://docs.octoprint.org/en/master/bundledplugins/pluginmanager.html) or manually using this URL: https://github.com/OctoPrint/OctoPrint-FirmwareCheck/archive/master.zip To install and/or rollback to a specific version ``, either use this URL in the plugin manager: https://github.com/OctoPrint/OctoPrint-FirmwareCheck/archive/.zip or run pip install OctoPrint-FirmwareCheck== in your OctoPrint virtual environment, substituting `` accordingly. ## Events ### plugin_firmware_check_warning *(as `Events.PLUGIN_FIRMWARE_CHECK_WARNING`)* A firmware check warning was triggered. Payload: * `warning_type`: type of warning that was triggered (currently `firmware-unsafe` or `firmware-broken`) * `check_name`: name of check that was triggered (e.g. `aneta8`, `cbd`) * `check_type`: type of check that was triggered (e.g. `m115`, `received` or `cap`) ## Detected issues The plugin currently issues three types of warnings: `firmware-unsafe` for firmware known to have severe safety issues, `firmware-broken` for firmware known to have a broken implementation of the communication protocol and `firmware-development` for detected development builds of firmware. ### Unsafe firmware Please refer to the [entry on the "unsafe firmware" warning in OctoPrint's FAQ](https://faq.octoprint.org/warning-firmware-unsafe) for a list of currently known to be affected printers. ### Broken firmware #### "CBD"/"ZWLF" firmware Please refer to the [entry on the "broken CBD firmware" warning in OctoPrint's FAQ](https://faq.octoprint.org/warning-firmware-broken-cbd) for a list of currently known to be affected printers. #### Creality firmware with broken temperature reporting Please refer to the [entry on the this warning in OctoPrint's FAQ](https://faq.octoprint.org/warning-firmware-broken-creality-temp) for variants of this and a list of currently known to be affected printers. ### Development firmware Please refer to the [entry on the "development firmware" warning in OctoPrint's FAQ](https://faq.octoprint.org/warning-firmware-development) for a list of currently detected firmware variants. %package -n python3-OctoPrint-FirmwareCheck Summary: Checks for unsafe or broken printer firmwares Provides: python-OctoPrint-FirmwareCheck BuildRequires: python3-devel BuildRequires: python3-setuptools BuildRequires: python3-pip %description -n python3-OctoPrint-FirmwareCheck # Firmware Check The Firmware Check plugin tries to identify printers or rather printer firmware with known safety issues, such as disabled thermal runaway protection, or other kinds of severe issues, like known communication crippling bugs, and displays a warning box to logged in users on identification of such a firmware. ![Screenshot of two warnings](https://raw.githubusercontent.com/OctoPrint/OctoPrint-FirmwareCheck/master/extras/screenshot.png) Since version 2021-2-4 it also displays info/"heads-ups" messages if a development firmware build is detected. This kind of message can be disabled. ![Screenshot of an info](https://raw.githubusercontent.com/OctoPrint/OctoPrint-FirmwareCheck/master/extras/screenshot2.png) It was formerly called "Printer Safety Check" and used to be bundled with OctoPrint since version 1.3.7. It was unbundled in 1.4.1 and turned into an install dependency to allow for a separate release cycle. It is still considered a core plugin of OctoPrint, treated as if bundled and thus also active in [safe mode](https://docs.octoprint.org/en/master/features/safemode.html). ## Setup The plugin is part of the core dependencies of OctoPrint 1.4.1+ and will be installed automatically alongside it. In case you want to manually install it into an older version for whatever reason, install via the bundled [Plugin Manager](https://docs.octoprint.org/en/master/bundledplugins/pluginmanager.html) or manually using this URL: https://github.com/OctoPrint/OctoPrint-FirmwareCheck/archive/master.zip To install and/or rollback to a specific version ``, either use this URL in the plugin manager: https://github.com/OctoPrint/OctoPrint-FirmwareCheck/archive/.zip or run pip install OctoPrint-FirmwareCheck== in your OctoPrint virtual environment, substituting `` accordingly. ## Events ### plugin_firmware_check_warning *(as `Events.PLUGIN_FIRMWARE_CHECK_WARNING`)* A firmware check warning was triggered. Payload: * `warning_type`: type of warning that was triggered (currently `firmware-unsafe` or `firmware-broken`) * `check_name`: name of check that was triggered (e.g. `aneta8`, `cbd`) * `check_type`: type of check that was triggered (e.g. `m115`, `received` or `cap`) ## Detected issues The plugin currently issues three types of warnings: `firmware-unsafe` for firmware known to have severe safety issues, `firmware-broken` for firmware known to have a broken implementation of the communication protocol and `firmware-development` for detected development builds of firmware. ### Unsafe firmware Please refer to the [entry on the "unsafe firmware" warning in OctoPrint's FAQ](https://faq.octoprint.org/warning-firmware-unsafe) for a list of currently known to be affected printers. ### Broken firmware #### "CBD"/"ZWLF" firmware Please refer to the [entry on the "broken CBD firmware" warning in OctoPrint's FAQ](https://faq.octoprint.org/warning-firmware-broken-cbd) for a list of currently known to be affected printers. #### Creality firmware with broken temperature reporting Please refer to the [entry on the this warning in OctoPrint's FAQ](https://faq.octoprint.org/warning-firmware-broken-creality-temp) for variants of this and a list of currently known to be affected printers. ### Development firmware Please refer to the [entry on the "development firmware" warning in OctoPrint's FAQ](https://faq.octoprint.org/warning-firmware-development) for a list of currently detected firmware variants. %package help Summary: Development documents and examples for OctoPrint-FirmwareCheck Provides: python3-OctoPrint-FirmwareCheck-doc %description help # Firmware Check The Firmware Check plugin tries to identify printers or rather printer firmware with known safety issues, such as disabled thermal runaway protection, or other kinds of severe issues, like known communication crippling bugs, and displays a warning box to logged in users on identification of such a firmware. ![Screenshot of two warnings](https://raw.githubusercontent.com/OctoPrint/OctoPrint-FirmwareCheck/master/extras/screenshot.png) Since version 2021-2-4 it also displays info/"heads-ups" messages if a development firmware build is detected. This kind of message can be disabled. ![Screenshot of an info](https://raw.githubusercontent.com/OctoPrint/OctoPrint-FirmwareCheck/master/extras/screenshot2.png) It was formerly called "Printer Safety Check" and used to be bundled with OctoPrint since version 1.3.7. It was unbundled in 1.4.1 and turned into an install dependency to allow for a separate release cycle. It is still considered a core plugin of OctoPrint, treated as if bundled and thus also active in [safe mode](https://docs.octoprint.org/en/master/features/safemode.html). ## Setup The plugin is part of the core dependencies of OctoPrint 1.4.1+ and will be installed automatically alongside it. In case you want to manually install it into an older version for whatever reason, install via the bundled [Plugin Manager](https://docs.octoprint.org/en/master/bundledplugins/pluginmanager.html) or manually using this URL: https://github.com/OctoPrint/OctoPrint-FirmwareCheck/archive/master.zip To install and/or rollback to a specific version ``, either use this URL in the plugin manager: https://github.com/OctoPrint/OctoPrint-FirmwareCheck/archive/.zip or run pip install OctoPrint-FirmwareCheck== in your OctoPrint virtual environment, substituting `` accordingly. ## Events ### plugin_firmware_check_warning *(as `Events.PLUGIN_FIRMWARE_CHECK_WARNING`)* A firmware check warning was triggered. Payload: * `warning_type`: type of warning that was triggered (currently `firmware-unsafe` or `firmware-broken`) * `check_name`: name of check that was triggered (e.g. `aneta8`, `cbd`) * `check_type`: type of check that was triggered (e.g. `m115`, `received` or `cap`) ## Detected issues The plugin currently issues three types of warnings: `firmware-unsafe` for firmware known to have severe safety issues, `firmware-broken` for firmware known to have a broken implementation of the communication protocol and `firmware-development` for detected development builds of firmware. ### Unsafe firmware Please refer to the [entry on the "unsafe firmware" warning in OctoPrint's FAQ](https://faq.octoprint.org/warning-firmware-unsafe) for a list of currently known to be affected printers. ### Broken firmware #### "CBD"/"ZWLF" firmware Please refer to the [entry on the "broken CBD firmware" warning in OctoPrint's FAQ](https://faq.octoprint.org/warning-firmware-broken-cbd) for a list of currently known to be affected printers. #### Creality firmware with broken temperature reporting Please refer to the [entry on the this warning in OctoPrint's FAQ](https://faq.octoprint.org/warning-firmware-broken-creality-temp) for variants of this and a list of currently known to be affected printers. ### Development firmware Please refer to the [entry on the "development firmware" warning in OctoPrint's FAQ](https://faq.octoprint.org/warning-firmware-development) for a list of currently detected firmware variants. %prep %autosetup -n OctoPrint-FirmwareCheck-2021.10.11 %build %py3_build %install %py3_install install -d -m755 %{buildroot}/%{_pkgdocdir} if [ -d doc ]; then cp -arf doc %{buildroot}/%{_pkgdocdir}; fi if [ -d docs ]; then cp -arf docs %{buildroot}/%{_pkgdocdir}; fi if [ -d example ]; then cp -arf example %{buildroot}/%{_pkgdocdir}; fi if [ -d examples ]; then cp -arf examples %{buildroot}/%{_pkgdocdir}; fi pushd %{buildroot} if [ -d usr/lib ]; then find usr/lib -type f -printf "/%h/%f\n" >> filelist.lst fi if [ -d usr/lib64 ]; then find usr/lib64 -type f -printf "/%h/%f\n" >> filelist.lst fi if [ -d usr/bin ]; then find usr/bin -type f -printf "/%h/%f\n" >> filelist.lst fi if [ -d usr/sbin ]; then find usr/sbin -type f -printf "/%h/%f\n" >> filelist.lst fi touch doclist.lst if [ -d usr/share/man ]; then find usr/share/man -type f -printf "/%h/%f.gz\n" >> doclist.lst fi popd mv %{buildroot}/filelist.lst . mv %{buildroot}/doclist.lst . %files -n python3-OctoPrint-FirmwareCheck -f filelist.lst %dir %{python3_sitelib}/* %files help -f doclist.lst %{_docdir}/* %changelog * Sun Apr 23 2023 Python_Bot - 2021.10.11-1 - Package Spec generated