%global _empty_manifest_terminate_build 0 Name: python-airtouch4pyapi Version: 1.0.8 Release: 1 Summary: An api allowing control of AC state (temperature, on/off, mode) of an Airtouch 4 controller locally over TCP License: MIT License URL: https://github.com/LonePurpleWolf/airtouch4pyapi Source0: https://mirrors.nju.edu.cn/pypi/web/packages/1b/e9/f16962de46563a761d12d79f697d3fa1f34210a3e2776209257c85b90430/airtouch4pyapi-1.0.8.tar.gz BuildArch: noarch Requires: python3-numpy %description # Airtouch 4 & 5 Python TCP API An api allowing control of AC state (temperature, on/off, mode) of an Airtouch 4 controller locally over TCP. Airtouch 5 support is experimental as of 28 Nov 2022, and is fully interface compatible with AT4. All you need to do is initialise and specify the correct AirTouchVersion (if you don't, it assumes 4). ## Warning I am using this with my own Airtouch 4 and see no issues. Please don't blame me if you have any issues with your Airtouch 4 or AC system after using this - I don't know much about AC systems and will probably not be able to help! Others are using it with Airtouch 5 and see no issues. ## Usage To initialise: * `airTouch = AirTouch("192.168.1.19")` * `airTouch = AirTouch("192.168.1.1", AirTouchVersion.AIRTOUCH5)` As a test: Use the demo.py file and pass in an AirTouch IP. It takes you through a few tests. ## Notes AirTouch5: If you turn off all zones, the AC itself turns off. Turning on a zone does not turn the AC back on by itself. You must turn it back on too. Same behaviour in 'official' app. To load: * `await airTouch.UpdateInfo();` -- This loads the config from the AirTouch. Make sure you check for any errors before using it. It will load the Group/Zone info, the AC info, then capabilities. This needs to happen prior to using. The following functions are available: Group Level Functions: * `SetGroupToTemperature` (async) * `TurnGroupOn` (async) * `TurnGroupOff` (async) * `SetCoolingModeByGroup` (async) * `SetFanSpeedByGroup` (async) * `GetSupportedCoolingModesByGroup` -- Based on the loaded config. * `GetSupportedFanSpeedsByGroup` -- Based on the loaded config. AC Level Functions * `TurnAcOn` (async) * `TurnAcOff` (async) * `SetFanSpeedForAc` (async) * `SetCoolingModeForAc` (async) * `GetSupportedCoolingModesForAc` * `GetSupportedFanSpeedsForAc` * `GetAcs` %package -n python3-airtouch4pyapi Summary: An api allowing control of AC state (temperature, on/off, mode) of an Airtouch 4 controller locally over TCP Provides: python-airtouch4pyapi BuildRequires: python3-devel BuildRequires: python3-setuptools BuildRequires: python3-pip %description -n python3-airtouch4pyapi # Airtouch 4 & 5 Python TCP API An api allowing control of AC state (temperature, on/off, mode) of an Airtouch 4 controller locally over TCP. Airtouch 5 support is experimental as of 28 Nov 2022, and is fully interface compatible with AT4. All you need to do is initialise and specify the correct AirTouchVersion (if you don't, it assumes 4). ## Warning I am using this with my own Airtouch 4 and see no issues. Please don't blame me if you have any issues with your Airtouch 4 or AC system after using this - I don't know much about AC systems and will probably not be able to help! Others are using it with Airtouch 5 and see no issues. ## Usage To initialise: * `airTouch = AirTouch("192.168.1.19")` * `airTouch = AirTouch("192.168.1.1", AirTouchVersion.AIRTOUCH5)` As a test: Use the demo.py file and pass in an AirTouch IP. It takes you through a few tests. ## Notes AirTouch5: If you turn off all zones, the AC itself turns off. Turning on a zone does not turn the AC back on by itself. You must turn it back on too. Same behaviour in 'official' app. To load: * `await airTouch.UpdateInfo();` -- This loads the config from the AirTouch. Make sure you check for any errors before using it. It will load the Group/Zone info, the AC info, then capabilities. This needs to happen prior to using. The following functions are available: Group Level Functions: * `SetGroupToTemperature` (async) * `TurnGroupOn` (async) * `TurnGroupOff` (async) * `SetCoolingModeByGroup` (async) * `SetFanSpeedByGroup` (async) * `GetSupportedCoolingModesByGroup` -- Based on the loaded config. * `GetSupportedFanSpeedsByGroup` -- Based on the loaded config. AC Level Functions * `TurnAcOn` (async) * `TurnAcOff` (async) * `SetFanSpeedForAc` (async) * `SetCoolingModeForAc` (async) * `GetSupportedCoolingModesForAc` * `GetSupportedFanSpeedsForAc` * `GetAcs` %package help Summary: Development documents and examples for airtouch4pyapi Provides: python3-airtouch4pyapi-doc %description help # Airtouch 4 & 5 Python TCP API An api allowing control of AC state (temperature, on/off, mode) of an Airtouch 4 controller locally over TCP. Airtouch 5 support is experimental as of 28 Nov 2022, and is fully interface compatible with AT4. All you need to do is initialise and specify the correct AirTouchVersion (if you don't, it assumes 4). ## Warning I am using this with my own Airtouch 4 and see no issues. Please don't blame me if you have any issues with your Airtouch 4 or AC system after using this - I don't know much about AC systems and will probably not be able to help! Others are using it with Airtouch 5 and see no issues. ## Usage To initialise: * `airTouch = AirTouch("192.168.1.19")` * `airTouch = AirTouch("192.168.1.1", AirTouchVersion.AIRTOUCH5)` As a test: Use the demo.py file and pass in an AirTouch IP. It takes you through a few tests. ## Notes AirTouch5: If you turn off all zones, the AC itself turns off. Turning on a zone does not turn the AC back on by itself. You must turn it back on too. Same behaviour in 'official' app. To load: * `await airTouch.UpdateInfo();` -- This loads the config from the AirTouch. Make sure you check for any errors before using it. It will load the Group/Zone info, the AC info, then capabilities. This needs to happen prior to using. The following functions are available: Group Level Functions: * `SetGroupToTemperature` (async) * `TurnGroupOn` (async) * `TurnGroupOff` (async) * `SetCoolingModeByGroup` (async) * `SetFanSpeedByGroup` (async) * `GetSupportedCoolingModesByGroup` -- Based on the loaded config. * `GetSupportedFanSpeedsByGroup` -- Based on the loaded config. AC Level Functions * `TurnAcOn` (async) * `TurnAcOff` (async) * `SetFanSpeedForAc` (async) * `SetCoolingModeForAc` (async) * `GetSupportedCoolingModesForAc` * `GetSupportedFanSpeedsForAc` * `GetAcs` %prep %autosetup -n airtouch4pyapi-1.0.8 %build %py3_build %install %py3_install install -d -m755 %{buildroot}/%{_pkgdocdir} if [ -d doc ]; then cp -arf doc %{buildroot}/%{_pkgdocdir}; fi if [ -d docs ]; then cp -arf docs %{buildroot}/%{_pkgdocdir}; fi if [ -d example ]; then cp -arf example %{buildroot}/%{_pkgdocdir}; fi if [ -d examples ]; then cp -arf examples %{buildroot}/%{_pkgdocdir}; fi pushd %{buildroot} if [ -d usr/lib ]; then find usr/lib -type f -printf "/%h/%f\n" >> filelist.lst fi if [ -d usr/lib64 ]; then find usr/lib64 -type f -printf "/%h/%f\n" >> filelist.lst fi if [ -d usr/bin ]; then find usr/bin -type f -printf "/%h/%f\n" >> filelist.lst fi if [ -d usr/sbin ]; then find usr/sbin -type f -printf "/%h/%f\n" >> filelist.lst fi touch doclist.lst if [ -d usr/share/man ]; then find usr/share/man -type f -printf "/%h/%f.gz\n" >> doclist.lst fi popd mv %{buildroot}/filelist.lst . mv %{buildroot}/doclist.lst . %files -n python3-airtouch4pyapi -f filelist.lst %dir %{python3_sitelib}/* %files help -f doclist.lst %{_docdir}/* %changelog * Fri May 05 2023 Python_Bot - 1.0.8-1 - Package Spec generated