%global _empty_manifest_terminate_build 0
Name:		python-ledgerblue
Version:	0.1.47
Release:	1
Summary:	Python library to communicate with Ledger Blue/Nano S
License:	Apache Software License
URL:		https://github.com/LedgerHQ/blue-loader-python
Source0:	https://mirrors.aliyun.com/pypi/web/packages/b2/f9/90c59225d803016111e0cbaac283a74778021725bb4c3d425d776c6b2eec/ledgerblue-0.1.47.tar.gz
BuildArch:	noarch


%description
# Python tools for Ledger Blue, Nano S and Nano X

This package contains Python tools to communicate with Ledger Blue, Nano S and Nano X and manage applications life cycle.

It is recommended to install this package in a [Virtual Environment](http://docs.python-guide.org/en/latest/dev/virtualenvs/) in your native environment (not a Docker image) to avoid hidapi issues.

```
virtualenv ledger
source ledger/bin/activate
pip install ledgerblue
```

## Supported devices 

At the moment these tools work for all Nano S and Blue devices, but only for special Nano X developer units which are not available to the general public.

Please check [Ledger Developer Portal](https://developers.ledger.com/docs/nano-app/introduction/) to see how to debug your application on a Nano X simulator using [Speculos](https://github.com/LedgerHQ/speculos)

## Installation pre-requisites


  * libudev-dev
  * libusb-1.0-0-dev
  * python-dev (python 2.7)
  * virtualenv

This package can optionally work with [libsecp256k1](https://github.com/ludbb/secp256k1-py) Python bindings compiled with ECDH support. If you wish to enable libsecp256k1 bindings, make sure to install libsecp256k1 as follows:

```
SECP_BUNDLED_EXPERIMENTAL=1 pip --no-cache-dir install --no-binary secp256k1 secp256k1
```

To install the custom secp256k1 package on MacOS, you previously need to run:
```
brew install libtool
```
Which would end up installing glibtool and glibtoolize utilities required for the build process.

## Giving permissions on udev

When running on Linux, make sure the following rules have been added to `/etc/udev/rules.d/`:

```
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2c97", ATTRS{idProduct}=="0000", MODE="0660", TAG+="uaccess", TAG+="udev-acl" OWNER="<UNIX username>"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2c97", ATTRS{idProduct}=="0001", MODE="0660", TAG+="uaccess", TAG+="udev-acl" OWNER="<UNIX username>"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2c97", ATTRS{idProduct}=="0004", MODE="0660", TAG+="uaccess", TAG+="udev-acl" OWNER="<UNIX username>"
```

## Target ID

Use the following Target IDs (--targetId option) when running commands directly:

  * 0x31100002 on Nano S with firmware <= 1.3.1
  * 0x31100003 on Nano S with firmware 1.4.x
  * 0x31100004 on Nano S with firmware 1.5.x
  * 0x31000002 on Blue with firmware <= 2.0
  * 0x31000004 on Blue with firmware 2.1.x
  * 0x31010004 on Blue v2 with firmware 2.1.x
  * 0x33000004 on Nano X with firmware 1.x (**developer units only**)


%package -n python3-ledgerblue
Summary:	Python library to communicate with Ledger Blue/Nano S
Provides:	python-ledgerblue
BuildRequires:	python3-devel
BuildRequires:	python3-setuptools
BuildRequires:	python3-pip
%description -n python3-ledgerblue
# Python tools for Ledger Blue, Nano S and Nano X

This package contains Python tools to communicate with Ledger Blue, Nano S and Nano X and manage applications life cycle.

It is recommended to install this package in a [Virtual Environment](http://docs.python-guide.org/en/latest/dev/virtualenvs/) in your native environment (not a Docker image) to avoid hidapi issues.

```
virtualenv ledger
source ledger/bin/activate
pip install ledgerblue
```

## Supported devices 

At the moment these tools work for all Nano S and Blue devices, but only for special Nano X developer units which are not available to the general public.

Please check [Ledger Developer Portal](https://developers.ledger.com/docs/nano-app/introduction/) to see how to debug your application on a Nano X simulator using [Speculos](https://github.com/LedgerHQ/speculos)

## Installation pre-requisites


  * libudev-dev
  * libusb-1.0-0-dev
  * python-dev (python 2.7)
  * virtualenv

This package can optionally work with [libsecp256k1](https://github.com/ludbb/secp256k1-py) Python bindings compiled with ECDH support. If you wish to enable libsecp256k1 bindings, make sure to install libsecp256k1 as follows:

```
SECP_BUNDLED_EXPERIMENTAL=1 pip --no-cache-dir install --no-binary secp256k1 secp256k1
```

To install the custom secp256k1 package on MacOS, you previously need to run:
```
brew install libtool
```
Which would end up installing glibtool and glibtoolize utilities required for the build process.

## Giving permissions on udev

When running on Linux, make sure the following rules have been added to `/etc/udev/rules.d/`:

```
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2c97", ATTRS{idProduct}=="0000", MODE="0660", TAG+="uaccess", TAG+="udev-acl" OWNER="<UNIX username>"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2c97", ATTRS{idProduct}=="0001", MODE="0660", TAG+="uaccess", TAG+="udev-acl" OWNER="<UNIX username>"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2c97", ATTRS{idProduct}=="0004", MODE="0660", TAG+="uaccess", TAG+="udev-acl" OWNER="<UNIX username>"
```

## Target ID

Use the following Target IDs (--targetId option) when running commands directly:

  * 0x31100002 on Nano S with firmware <= 1.3.1
  * 0x31100003 on Nano S with firmware 1.4.x
  * 0x31100004 on Nano S with firmware 1.5.x
  * 0x31000002 on Blue with firmware <= 2.0
  * 0x31000004 on Blue with firmware 2.1.x
  * 0x31010004 on Blue v2 with firmware 2.1.x
  * 0x33000004 on Nano X with firmware 1.x (**developer units only**)


%package help
Summary:	Development documents and examples for ledgerblue
Provides:	python3-ledgerblue-doc
%description help
# Python tools for Ledger Blue, Nano S and Nano X

This package contains Python tools to communicate with Ledger Blue, Nano S and Nano X and manage applications life cycle.

It is recommended to install this package in a [Virtual Environment](http://docs.python-guide.org/en/latest/dev/virtualenvs/) in your native environment (not a Docker image) to avoid hidapi issues.

```
virtualenv ledger
source ledger/bin/activate
pip install ledgerblue
```

## Supported devices 

At the moment these tools work for all Nano S and Blue devices, but only for special Nano X developer units which are not available to the general public.

Please check [Ledger Developer Portal](https://developers.ledger.com/docs/nano-app/introduction/) to see how to debug your application on a Nano X simulator using [Speculos](https://github.com/LedgerHQ/speculos)

## Installation pre-requisites


  * libudev-dev
  * libusb-1.0-0-dev
  * python-dev (python 2.7)
  * virtualenv

This package can optionally work with [libsecp256k1](https://github.com/ludbb/secp256k1-py) Python bindings compiled with ECDH support. If you wish to enable libsecp256k1 bindings, make sure to install libsecp256k1 as follows:

```
SECP_BUNDLED_EXPERIMENTAL=1 pip --no-cache-dir install --no-binary secp256k1 secp256k1
```

To install the custom secp256k1 package on MacOS, you previously need to run:
```
brew install libtool
```
Which would end up installing glibtool and glibtoolize utilities required for the build process.

## Giving permissions on udev

When running on Linux, make sure the following rules have been added to `/etc/udev/rules.d/`:

```
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2c97", ATTRS{idProduct}=="0000", MODE="0660", TAG+="uaccess", TAG+="udev-acl" OWNER="<UNIX username>"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2c97", ATTRS{idProduct}=="0001", MODE="0660", TAG+="uaccess", TAG+="udev-acl" OWNER="<UNIX username>"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2c97", ATTRS{idProduct}=="0004", MODE="0660", TAG+="uaccess", TAG+="udev-acl" OWNER="<UNIX username>"
```

## Target ID

Use the following Target IDs (--targetId option) when running commands directly:

  * 0x31100002 on Nano S with firmware <= 1.3.1
  * 0x31100003 on Nano S with firmware 1.4.x
  * 0x31100004 on Nano S with firmware 1.5.x
  * 0x31000002 on Blue with firmware <= 2.0
  * 0x31000004 on Blue with firmware 2.1.x
  * 0x31010004 on Blue v2 with firmware 2.1.x
  * 0x33000004 on Nano X with firmware 1.x (**developer units only**)


%prep
%autosetup -n ledgerblue-0.1.47

%build
%py3_build

%install
%py3_install
install -d -m755 %{buildroot}/%{_pkgdocdir}
if [ -d doc ]; then cp -arf doc %{buildroot}/%{_pkgdocdir}; fi
if [ -d docs ]; then cp -arf docs %{buildroot}/%{_pkgdocdir}; fi
if [ -d example ]; then cp -arf example %{buildroot}/%{_pkgdocdir}; fi
if [ -d examples ]; then cp -arf examples %{buildroot}/%{_pkgdocdir}; fi
pushd %{buildroot}
if [ -d usr/lib ]; then
	find usr/lib -type f -printf "\"/%h/%f\"\n" >> filelist.lst
fi
if [ -d usr/lib64 ]; then
	find usr/lib64 -type f -printf "\"/%h/%f\"\n" >> filelist.lst
fi
if [ -d usr/bin ]; then
	find usr/bin -type f -printf "\"/%h/%f\"\n" >> filelist.lst
fi
if [ -d usr/sbin ]; then
	find usr/sbin -type f -printf "\"/%h/%f\"\n" >> filelist.lst
fi
touch doclist.lst
if [ -d usr/share/man ]; then
	find usr/share/man -type f -printf "\"/%h/%f.gz\"\n" >> doclist.lst
fi
popd
mv %{buildroot}/filelist.lst .
mv %{buildroot}/doclist.lst .

%files -n python3-ledgerblue -f filelist.lst
%dir %{python3_sitelib}/*

%files help -f doclist.lst
%{_docdir}/*

%changelog
* Thu Jun 08 2023 Python_Bot <Python_Bot@openeuler.org> - 0.1.47-1
- Package Spec generated