%global _empty_manifest_terminate_build 0 Name: python-esphomeflasher Version: 1.3.0 Release: 1 Summary: ESP8266/ESP32 firmware flasher for ESPHome License: MIT URL: https://github.com/esphome/esphome-flasher Source0: https://mirrors.aliyun.com/pypi/web/packages/4a/66/34bb9e04641f3c0800ec8ddfa7d17cbe6585680be2e82c1d53cb2fe840d1/esphomeflasher-1.3.0.tar.gz BuildArch: noarch Requires: python3-esptool Requires: python3-requests Requires: python3-wxpython %description # ESPHome-Flasher ESPHome-Flasher is a utility app for the [ESPHome](https://esphome.io/) framework and is designed to make flashing ESPs with ESPHome as simple as possible by: * Having pre-built binaries for most operating systems. * Hiding all non-essential options for flashing. All necessary options for flashing (bootloader, flash mode) are automatically extracted from the binary. This project was originally intended to be a simple command-line tool, but then I decided that a GUI would be nice. As I don't like writing graphical front end code, the GUI largely is based on the [NodeMCU PyFlasher](https://github.com/marcelstoer/nodemcu-pyflasher) project. The flashing process is done using the [esptool](https://github.com/espressif/esptool) library by espressif. ## Installation Es doesn't have to be installed, just double-click it and it'll start. Check the [releases section](https://github.com/esphome/esphome-flasher/releases) for downloads for your platform. ## Installation Using `pip` If you want to install this application from `pip`: - Install Python 3.x - Install [wxPython 4.x](https://wxpython.org/) manually or run `pip3 install wxpython` (see also linux notes below) - Install this project using `pip3 install esphomeflasher` - Start the GUI using `esphomeflasher`. Alternatively, you can use the command line interface ( type `esphomeflasher -h` for info) ## Build it yourself If you want to build this application yourself you need to: - Install Python 3.x - Install [wxPython 4.x](https://wxpython.org/) manually or run `pip3 install wxpython` - Download this project and run `pip3 install -e .` in the project's root. - Start the GUI using `esphomeflasher`. Alternatively, you can use the command line interface ( type `esphomeflasher -h` for info) ## Linux Notes Installing wxpython for linux can be a bit challenging (especially when you don't want to install from source). You can use the following command to install a wxpython suitable with your OS: ```bash # Go to https://extras.wxpython.org/wxPython4/extras/linux/gtk3/ and select the correct OS type # here, we assume ubuntu 18.03 bionic pip3 install -U \ -f https://extras.wxpython.org/wxPython4/extras/linux/gtk3/ubuntu-18.04 \ wxPython ``` ## License [MIT](http://opensource.org/licenses/MIT) © Marcel Stör, Otto Winter %package -n python3-esphomeflasher Summary: ESP8266/ESP32 firmware flasher for ESPHome Provides: python-esphomeflasher BuildRequires: python3-devel BuildRequires: python3-setuptools BuildRequires: python3-pip %description -n python3-esphomeflasher # ESPHome-Flasher ESPHome-Flasher is a utility app for the [ESPHome](https://esphome.io/) framework and is designed to make flashing ESPs with ESPHome as simple as possible by: * Having pre-built binaries for most operating systems. * Hiding all non-essential options for flashing. All necessary options for flashing (bootloader, flash mode) are automatically extracted from the binary. This project was originally intended to be a simple command-line tool, but then I decided that a GUI would be nice. As I don't like writing graphical front end code, the GUI largely is based on the [NodeMCU PyFlasher](https://github.com/marcelstoer/nodemcu-pyflasher) project. The flashing process is done using the [esptool](https://github.com/espressif/esptool) library by espressif. ## Installation Es doesn't have to be installed, just double-click it and it'll start. Check the [releases section](https://github.com/esphome/esphome-flasher/releases) for downloads for your platform. ## Installation Using `pip` If you want to install this application from `pip`: - Install Python 3.x - Install [wxPython 4.x](https://wxpython.org/) manually or run `pip3 install wxpython` (see also linux notes below) - Install this project using `pip3 install esphomeflasher` - Start the GUI using `esphomeflasher`. Alternatively, you can use the command line interface ( type `esphomeflasher -h` for info) ## Build it yourself If you want to build this application yourself you need to: - Install Python 3.x - Install [wxPython 4.x](https://wxpython.org/) manually or run `pip3 install wxpython` - Download this project and run `pip3 install -e .` in the project's root. - Start the GUI using `esphomeflasher`. Alternatively, you can use the command line interface ( type `esphomeflasher -h` for info) ## Linux Notes Installing wxpython for linux can be a bit challenging (especially when you don't want to install from source). You can use the following command to install a wxpython suitable with your OS: ```bash # Go to https://extras.wxpython.org/wxPython4/extras/linux/gtk3/ and select the correct OS type # here, we assume ubuntu 18.03 bionic pip3 install -U \ -f https://extras.wxpython.org/wxPython4/extras/linux/gtk3/ubuntu-18.04 \ wxPython ``` ## License [MIT](http://opensource.org/licenses/MIT) © Marcel Stör, Otto Winter %package help Summary: Development documents and examples for esphomeflasher Provides: python3-esphomeflasher-doc %description help # ESPHome-Flasher ESPHome-Flasher is a utility app for the [ESPHome](https://esphome.io/) framework and is designed to make flashing ESPs with ESPHome as simple as possible by: * Having pre-built binaries for most operating systems. * Hiding all non-essential options for flashing. All necessary options for flashing (bootloader, flash mode) are automatically extracted from the binary. This project was originally intended to be a simple command-line tool, but then I decided that a GUI would be nice. As I don't like writing graphical front end code, the GUI largely is based on the [NodeMCU PyFlasher](https://github.com/marcelstoer/nodemcu-pyflasher) project. The flashing process is done using the [esptool](https://github.com/espressif/esptool) library by espressif. ## Installation Es doesn't have to be installed, just double-click it and it'll start. Check the [releases section](https://github.com/esphome/esphome-flasher/releases) for downloads for your platform. ## Installation Using `pip` If you want to install this application from `pip`: - Install Python 3.x - Install [wxPython 4.x](https://wxpython.org/) manually or run `pip3 install wxpython` (see also linux notes below) - Install this project using `pip3 install esphomeflasher` - Start the GUI using `esphomeflasher`. Alternatively, you can use the command line interface ( type `esphomeflasher -h` for info) ## Build it yourself If you want to build this application yourself you need to: - Install Python 3.x - Install [wxPython 4.x](https://wxpython.org/) manually or run `pip3 install wxpython` - Download this project and run `pip3 install -e .` in the project's root. - Start the GUI using `esphomeflasher`. Alternatively, you can use the command line interface ( type `esphomeflasher -h` for info) ## Linux Notes Installing wxpython for linux can be a bit challenging (especially when you don't want to install from source). You can use the following command to install a wxpython suitable with your OS: ```bash # Go to https://extras.wxpython.org/wxPython4/extras/linux/gtk3/ and select the correct OS type # here, we assume ubuntu 18.03 bionic pip3 install -U \ -f https://extras.wxpython.org/wxPython4/extras/linux/gtk3/ubuntu-18.04 \ wxPython ``` ## License [MIT](http://opensource.org/licenses/MIT) © Marcel Stör, Otto Winter %prep %autosetup -n esphomeflasher-1.3.0 %build %py3_build %install %py3_install install -d -m755 %{buildroot}/%{_pkgdocdir} if [ -d doc ]; then cp -arf doc %{buildroot}/%{_pkgdocdir}; fi if [ -d docs ]; then cp -arf docs %{buildroot}/%{_pkgdocdir}; fi if [ -d example ]; then cp -arf example %{buildroot}/%{_pkgdocdir}; fi if [ -d examples ]; then cp -arf examples %{buildroot}/%{_pkgdocdir}; fi pushd %{buildroot} if [ -d usr/lib ]; then find usr/lib -type f -printf "\"/%h/%f\"\n" >> filelist.lst fi if [ -d usr/lib64 ]; then find usr/lib64 -type f -printf "\"/%h/%f\"\n" >> filelist.lst fi if [ -d usr/bin ]; then find usr/bin -type f -printf "\"/%h/%f\"\n" >> filelist.lst fi if [ -d usr/sbin ]; then find usr/sbin -type f -printf "\"/%h/%f\"\n" >> filelist.lst fi touch doclist.lst if [ -d usr/share/man ]; then find usr/share/man -type f -printf "\"/%h/%f.gz\"\n" >> doclist.lst fi popd mv %{buildroot}/filelist.lst . mv %{buildroot}/doclist.lst . %files -n python3-esphomeflasher -f filelist.lst %dir %{python3_sitelib}/* %files help -f doclist.lst %{_docdir}/* %changelog * Tue Jun 20 2023 Python_Bot - 1.3.0-1 - Package Spec generated