automatic import of python-pi-dht-webthingopeneuler20.03

3 files changed, 214 insertions, 0 deletions

diff --git a/.gitignore b/.gitignore
index e69de29..25dee71 100644
--- a/.gitignore
+++ b/.gitignore
@@ -0,0 +1 @@
+/pi_dht_webthing-0.1.1.tar.gz
diff --git a/python-pi-dht-webthing.spec b/python-pi-dht-webthing.spec
new file mode 100644
index 0000000..7f0d8c6
--- /dev/null
+++ b/python-pi-dht-webthing.spec
@@ -0,0 +1,212 @@
+%global _empty_manifest_terminate_build 0
+Name:		python-pi-dht-webthing
+Version:	0.1.1
+Release:	1
+Summary:	A web connected DHT sensor reading temperature and humidity values on Raspberry Pi
+License:	MIT
+URL:		https://github.com/grro/pi_dht_webthing
+Source0:	https://mirrors.aliyun.com/pypi/web/packages/b9/f9/dda775dc92ae46004d6283b436ff77b7c67758a9e91bb27289cfefa533b8/pi_dht_webthing-0.1.1.tar.gz
+BuildArch:	noarch
+
+Requires:	python3-webthing
+Requires:	python3-Adafruit-DHT
+
+%description
+# pi_dht_webthing
+A web connected humidity and temperature sensor
+
+This project provides a [webthing API](https://iot.mozilla.org/wot/) to a [DHT11 or DHT22](https://learn.adafruit.com/dht) humidity and temperature sensor 
+running on a Raspberry Pi. As a webthing, the DHT sensor can be discovered and used by 
+*home automation systems* or custom solutions supporting the webthing API.  
+
+The pi_dht_webthing exposes an http webthing endpoint which supports reading the humidity and temperature sensor values via http. E.g. 
+```
+# webthing has been started on host 192.168.0.23
+
+curl http://192.168.0.23:8070/properties 
+
+{
+   "temperature" : 17.3,
+   "humidity" : 79.9
+}
+```
+
+A RaspberryPi/DHTxx hardware setup and wiring may look like [DHT22 example](docs/layout.png). 
+
+To install this software you may use [Docker](https://phoenixnap.com/kb/docker-on-raspberry-pi) or [PIP](https://realpython.com/what-is-pip/) package manager such as shown below
+
+** Docker approach**
+```
+sudo docker run --privileged -p 8070:8070 -e gpio=2 grro/pi_dht_webthing:0.1.0
+```
+
+**PIP approach**
+```
+sudo pip install pi_dht_webthing
+```
+
+After this installation you may start the webthing http endpoint inside your python code or via command line using
+```
+sudo dht --command listen --h--port 8070 --gpio 2
+```
+Here, the webthing API will be bind on port 8070 and be connected to the DHTxx signal pin using gpio 2
+
+Alternatively to the *listen* command, you can use the *register* command to register and start the webthing service as systemd unit. 
+By doing this the webthing service will be started automatically on boot. Starting the server manually using the *listen* command is no longer necessary. 
+```
+sudo dht --command register --port 8070 --gpio 2
+```  
+
+
+
+
+%package -n python3-pi-dht-webthing
+Summary:	A web connected DHT sensor reading temperature and humidity values on Raspberry Pi
+Provides:	python-pi-dht-webthing
+BuildRequires:	python3-devel
+BuildRequires:	python3-setuptools
+BuildRequires:	python3-pip
+%description -n python3-pi-dht-webthing
+# pi_dht_webthing
+A web connected humidity and temperature sensor
+
+This project provides a [webthing API](https://iot.mozilla.org/wot/) to a [DHT11 or DHT22](https://learn.adafruit.com/dht) humidity and temperature sensor 
+running on a Raspberry Pi. As a webthing, the DHT sensor can be discovered and used by 
+*home automation systems* or custom solutions supporting the webthing API.  
+
+The pi_dht_webthing exposes an http webthing endpoint which supports reading the humidity and temperature sensor values via http. E.g. 
+```
+# webthing has been started on host 192.168.0.23
+
+curl http://192.168.0.23:8070/properties 
+
+{
+   "temperature" : 17.3,
+   "humidity" : 79.9
+}
+```
+
+A RaspberryPi/DHTxx hardware setup and wiring may look like [DHT22 example](docs/layout.png). 
+
+To install this software you may use [Docker](https://phoenixnap.com/kb/docker-on-raspberry-pi) or [PIP](https://realpython.com/what-is-pip/) package manager such as shown below
+
+** Docker approach**
+```
+sudo docker run --privileged -p 8070:8070 -e gpio=2 grro/pi_dht_webthing:0.1.0
+```
+
+**PIP approach**
+```
+sudo pip install pi_dht_webthing
+```
+
+After this installation you may start the webthing http endpoint inside your python code or via command line using
+```
+sudo dht --command listen --h--port 8070 --gpio 2
+```
+Here, the webthing API will be bind on port 8070 and be connected to the DHTxx signal pin using gpio 2
+
+Alternatively to the *listen* command, you can use the *register* command to register and start the webthing service as systemd unit. 
+By doing this the webthing service will be started automatically on boot. Starting the server manually using the *listen* command is no longer necessary. 
+```
+sudo dht --command register --port 8070 --gpio 2
+```  
+
+
+
+
+%package help
+Summary:	Development documents and examples for pi-dht-webthing
+Provides:	python3-pi-dht-webthing-doc
+%description help
+# pi_dht_webthing
+A web connected humidity and temperature sensor
+
+This project provides a [webthing API](https://iot.mozilla.org/wot/) to a [DHT11 or DHT22](https://learn.adafruit.com/dht) humidity and temperature sensor 
+running on a Raspberry Pi. As a webthing, the DHT sensor can be discovered and used by 
+*home automation systems* or custom solutions supporting the webthing API.  
+
+The pi_dht_webthing exposes an http webthing endpoint which supports reading the humidity and temperature sensor values via http. E.g. 
+```
+# webthing has been started on host 192.168.0.23
+
+curl http://192.168.0.23:8070/properties 
+
+{
+   "temperature" : 17.3,
+   "humidity" : 79.9
+}
+```
+
+A RaspberryPi/DHTxx hardware setup and wiring may look like [DHT22 example](docs/layout.png). 
+
+To install this software you may use [Docker](https://phoenixnap.com/kb/docker-on-raspberry-pi) or [PIP](https://realpython.com/what-is-pip/) package manager such as shown below
+
+** Docker approach**
+```
+sudo docker run --privileged -p 8070:8070 -e gpio=2 grro/pi_dht_webthing:0.1.0
+```
+
+**PIP approach**
+```
+sudo pip install pi_dht_webthing
+```
+
+After this installation you may start the webthing http endpoint inside your python code or via command line using
+```
+sudo dht --command listen --h--port 8070 --gpio 2
+```
+Here, the webthing API will be bind on port 8070 and be connected to the DHTxx signal pin using gpio 2
+
+Alternatively to the *listen* command, you can use the *register* command to register and start the webthing service as systemd unit. 
+By doing this the webthing service will be started automatically on boot. Starting the server manually using the *listen* command is no longer necessary. 
+```
+sudo dht --command register --port 8070 --gpio 2
+```  
+
+
+
+
+%prep
+%autosetup -n pi_dht_webthing-0.1.1
+
+%build
+%py3_build
+
+%install
+%py3_install
+install -d -m755 %{buildroot}/%{_pkgdocdir}
+if [ -d doc ]; then cp -arf doc %{buildroot}/%{_pkgdocdir}; fi
+if [ -d docs ]; then cp -arf docs %{buildroot}/%{_pkgdocdir}; fi
+if [ -d example ]; then cp -arf example %{buildroot}/%{_pkgdocdir}; fi
+if [ -d examples ]; then cp -arf examples %{buildroot}/%{_pkgdocdir}; fi
+pushd %{buildroot}
+if [ -d usr/lib ]; then
+	find usr/lib -type f -printf "\"/%h/%f\"\n" >> filelist.lst
+fi
+if [ -d usr/lib64 ]; then
+	find usr/lib64 -type f -printf "\"/%h/%f\"\n" >> filelist.lst
+fi
+if [ -d usr/bin ]; then
+	find usr/bin -type f -printf "\"/%h/%f\"\n" >> filelist.lst
+fi
+if [ -d usr/sbin ]; then
+	find usr/sbin -type f -printf "\"/%h/%f\"\n" >> filelist.lst
+fi
+touch doclist.lst
+if [ -d usr/share/man ]; then
+	find usr/share/man -type f -printf "\"/%h/%f.gz\"\n" >> doclist.lst
+fi
+popd
+mv %{buildroot}/filelist.lst .
+mv %{buildroot}/doclist.lst .
+
+%files -n python3-pi-dht-webthing -f filelist.lst
+%dir %{python3_sitelib}/*
+
+%files help -f doclist.lst
+%{_docdir}/*
+
+%changelog
+* Tue Jun 20 2023 Python_Bot <Python_Bot@openeuler.org> - 0.1.1-1
+- Package Spec generated
diff --git a/sources b/sources
new file mode 100644
index 0000000..44ab112
--- /dev/null
+++ b/sources
@@ -0,0 +1 @@
+5404a625e24d57015bda651e0d4e32ec  pi_dht_webthing-0.1.1.tar.gz