automatic import of python-adafruit-sht31openeuler20.03

3 files changed, 236 insertions, 0 deletions

diff --git a/.gitignore b/.gitignore
index e69de29..7ba2699 100644
--- a/.gitignore
+++ b/.gitignore
@@ -0,0 +1 @@
+/Adafruit_SHT31-1.0.2.tar.gz
diff --git a/python-adafruit-sht31.spec b/python-adafruit-sht31.spec
new file mode 100644
index 0000000..1bf43a8
--- /dev/null
+++ b/python-adafruit-sht31.spec
@@ -0,0 +1,234 @@
+%global _empty_manifest_terminate_build 0
+Name:		python-Adafruit-SHT31
+Version:	1.0.2
+Release:	1
+Summary:	Python Library for Adafruit SHT31 module
+License:	MIT
+URL:		https://github.com/ralf1070/Adafruit_Python_SHT31
+Source0:	https://mirrors.nju.edu.cn/pypi/web/packages/1c/4f/2c6823cd69d5fcaf4748d07ebeced54e303016b468262ea18e9ef6137016/Adafruit_SHT31-1.0.2.tar.gz
+BuildArch:	noarch
+
+
+%description
+# Adafruit_Python_SHT31
+
+This Python driver allows you to read data from the [Adafruit SHT31D Breakout](https://www.adafruit.com/products/2857) on a Raspberry Pi, Pi2 or similar device.
+
+## Requirements
+
+This driver requires that you have previously installed the
+[Adafruit_Python_GPIO](https://github.com/adafruit/Adafruit_Python_GPIO) package.
+
+On Raspbian, you can install this package with the following commands:
+
+```
+sudo apt-get update
+sudo apt-get install build-essential python-pip python-dev python-smbus git
+git clone https://github.com/adafruit/Adafruit_Python_GPIO.git
+cd Adafruit_Python_GPIO
+sudo python setup.py install
+```
+
+## Usage
+
+To read a single set of data points from the SHT31, connect your Pi or Pi2
+to the SHT31D breakout using I2C (connect SCL0/1 to the SCK pin and SCL0/1
+to the SDI pin), and run the following command from this folder:
+
+```
+python Adafruit_SHT31_Example.py
+```
+
+## Credits
+
+This driver is based on the [Adafruit_BME280](https://github.com/adafruit/Adafruit_Python_BME280)
+driver by Tony DiCola (Adafruit Industries), with BME280 additions kindly provided by
+David J. Taylor (www.satsignal.eu).
+Modified for use with SHT31D by Ralf Mueller, (www.bj-ig.de)
+
+# MIT License
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+
+%package -n python3-Adafruit-SHT31
+Summary:	Python Library for Adafruit SHT31 module
+Provides:	python-Adafruit-SHT31
+BuildRequires:	python3-devel
+BuildRequires:	python3-setuptools
+BuildRequires:	python3-pip
+%description -n python3-Adafruit-SHT31
+# Adafruit_Python_SHT31
+
+This Python driver allows you to read data from the [Adafruit SHT31D Breakout](https://www.adafruit.com/products/2857) on a Raspberry Pi, Pi2 or similar device.
+
+## Requirements
+
+This driver requires that you have previously installed the
+[Adafruit_Python_GPIO](https://github.com/adafruit/Adafruit_Python_GPIO) package.
+
+On Raspbian, you can install this package with the following commands:
+
+```
+sudo apt-get update
+sudo apt-get install build-essential python-pip python-dev python-smbus git
+git clone https://github.com/adafruit/Adafruit_Python_GPIO.git
+cd Adafruit_Python_GPIO
+sudo python setup.py install
+```
+
+## Usage
+
+To read a single set of data points from the SHT31, connect your Pi or Pi2
+to the SHT31D breakout using I2C (connect SCL0/1 to the SCK pin and SCL0/1
+to the SDI pin), and run the following command from this folder:
+
+```
+python Adafruit_SHT31_Example.py
+```
+
+## Credits
+
+This driver is based on the [Adafruit_BME280](https://github.com/adafruit/Adafruit_Python_BME280)
+driver by Tony DiCola (Adafruit Industries), with BME280 additions kindly provided by
+David J. Taylor (www.satsignal.eu).
+Modified for use with SHT31D by Ralf Mueller, (www.bj-ig.de)
+
+# MIT License
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+
+%package help
+Summary:	Development documents and examples for Adafruit-SHT31
+Provides:	python3-Adafruit-SHT31-doc
+%description help
+# Adafruit_Python_SHT31
+
+This Python driver allows you to read data from the [Adafruit SHT31D Breakout](https://www.adafruit.com/products/2857) on a Raspberry Pi, Pi2 or similar device.
+
+## Requirements
+
+This driver requires that you have previously installed the
+[Adafruit_Python_GPIO](https://github.com/adafruit/Adafruit_Python_GPIO) package.
+
+On Raspbian, you can install this package with the following commands:
+
+```
+sudo apt-get update
+sudo apt-get install build-essential python-pip python-dev python-smbus git
+git clone https://github.com/adafruit/Adafruit_Python_GPIO.git
+cd Adafruit_Python_GPIO
+sudo python setup.py install
+```
+
+## Usage
+
+To read a single set of data points from the SHT31, connect your Pi or Pi2
+to the SHT31D breakout using I2C (connect SCL0/1 to the SCK pin and SCL0/1
+to the SDI pin), and run the following command from this folder:
+
+```
+python Adafruit_SHT31_Example.py
+```
+
+## Credits
+
+This driver is based on the [Adafruit_BME280](https://github.com/adafruit/Adafruit_Python_BME280)
+driver by Tony DiCola (Adafruit Industries), with BME280 additions kindly provided by
+David J. Taylor (www.satsignal.eu).
+Modified for use with SHT31D by Ralf Mueller, (www.bj-ig.de)
+
+# MIT License
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+
+%prep
+%autosetup -n Adafruit-SHT31-1.0.2
+
+%build
+%py3_build
+
+%install
+%py3_install
+install -d -m755 %{buildroot}/%{_pkgdocdir}
+if [ -d doc ]; then cp -arf doc %{buildroot}/%{_pkgdocdir}; fi
+if [ -d docs ]; then cp -arf docs %{buildroot}/%{_pkgdocdir}; fi
+if [ -d example ]; then cp -arf example %{buildroot}/%{_pkgdocdir}; fi
+if [ -d examples ]; then cp -arf examples %{buildroot}/%{_pkgdocdir}; fi
+pushd %{buildroot}
+if [ -d usr/lib ]; then
+	find usr/lib -type f -printf "/%h/%f\n" >> filelist.lst
+fi
+if [ -d usr/lib64 ]; then
+	find usr/lib64 -type f -printf "/%h/%f\n" >> filelist.lst
+fi
+if [ -d usr/bin ]; then
+	find usr/bin -type f -printf "/%h/%f\n" >> filelist.lst
+fi
+if [ -d usr/sbin ]; then
+	find usr/sbin -type f -printf "/%h/%f\n" >> filelist.lst
+fi
+touch doclist.lst
+if [ -d usr/share/man ]; then
+	find usr/share/man -type f -printf "/%h/%f.gz\n" >> doclist.lst
+fi
+popd
+mv %{buildroot}/filelist.lst .
+mv %{buildroot}/doclist.lst .
+
+%files -n python3-Adafruit-SHT31 -f filelist.lst
+%dir %{python3_sitelib}/*
+
+%files help -f doclist.lst
+%{_docdir}/*
+
+%changelog
+* Fri May 05 2023 Python_Bot <Python_Bot@openeuler.org> - 1.0.2-1
+- Package Spec generated
diff --git a/sources b/sources
new file mode 100644
index 0000000..bc7e501
--- /dev/null
+++ b/sources
@@ -0,0 +1 @@
+b03b81f5d7012e42b3255cb3ab72a095  Adafruit_SHT31-1.0.2.tar.gz